Qdatasheet_Logo     Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
HOME  >>>  Integrated Silicon Solution  >>> IS25LD256C PDF

IS25LD256C Datasheet PDF - Integrated Silicon Solution

Part NameDescriptionManufacturer
IS25LD256C 256Kbit Single Operating Voltage Serial Flash Memory With 100 MHz Dual-Output SPI Bus Interface ISSI
Integrated Silicon Solution ISSI
Other PDF  no available.
IS25LD256C Datasheet PDF : PDF DOWNLOAD   
IS25LD256C image

GENERAL DESCRIPTION
The IS25LD256C are 256Kbit Serial Peripheral Interface (SPI) Flash memories, providing single- or dual-output. The devices are designed to support a 33 MHz clock rate in normal read mode, and 100 MHz in fast read, the fastest in the industry. The devices use a single low voltage power supply, wide operating voltage ranging from 2.7 Volt to 3.6 Volt, to perform read, erase and program operations. The devices can be programmed in standard EPROM programmers.

FEATURES
• Single Power Supply Operation
    - Low voltage range: 2.7 V - 3.6 V
• Memory Organization
    - IS25LD256C: 32K x 8 (256Kbit)
• Cost Effective Sector/Block Architecture
    -256Kb : Uniform 4KByte sectors / one uniform 32KByte blocks
• Low standby current 1uA (Typ)
• Serial Peripheral Interface (SPI) Compatible
    - Supports single- or dual-output
    - Supports SPI Modes 0 and 3
    - Maximum 33 MHz clock rate for normal read
    - Maximum 100 MHz clock rate for fast read
• Page Program (up to 256 Bytes) Operation
    - Typical 2 ms per page program
• Sector, Block or Chip Erase Operation
    - Maximum 7 ms sector, block or chip erase
• Low Power Consumption
    - Typical 1 mA active read current
    - Typical 10 mA program/erase current
• Hardware Write Protection
    - Protect and unprotect the device from write operation by Write Protect (WP#) Pin
• Software Write Protection
    - The Block Protect (BP2, BP1, BP0) bits allow partial or entire memory to be configured as readonly
• High Product Endurance
    - Guaranteed 200,000 program/erase cycles per single sector
    - Minimum 20 years data retention
• Industrial Standard Pin-out and Package
    - 8-pin 150mil SOIC
    - 8-pin TSSOP
    - Lead-free (Pb-free) package

 

Other manufacturer searches related to IS25LD256C

Part NameDescriptionPDFManufacturer
PM25LD010 512Kbit/1 Mbit / 2 Mbit Single Operating Voltage Serial Flash Memory With 100 MHz Dual-Output SPI Bus VIEW Unspecified
M25P05-VMN6T 512 Kbit, Low Voltage, Serial Flash Memory With 20 MHz SPI Bus Interface VIEW STMicroelectronics
M25P10 1 Mbit Low Voltage Paged Flash Memory With 20 MHz Serial SPI Bus Interface VIEW STMicroelectronics
S25FL128K 128-Mbit CMOS 3.0 Volt Flash Memory with 104-MHz SPI (Serial Peripheral Interface) Multi I/O Bus VIEW Spansion Inc.
S25FL064K 64-Mbit CMOS 3.0 Volt Flash Memory with 80-MHz SPI (Serial Peripheral Interface) Multi I/O Bus VIEW Spansion Inc.
M25P16-VMW3G 16 Mbit, low voltage,Serial Flash memory with 50 MHz SPI bus interface VIEW STMicroelectronics
M25P64 64 Mbit, low voltage, Serial Flash memory with 50 MHz SPI bus interface VIEW STMicroelectronics
M25P64 64 Mbit, low voltage, Serial Flash memory with 50 MHz SPI bus interface VIEW Numonyx -> Micron
M25P128 128 Mbit (Multilevel), low-voltage, Serial Flash memory with 50-MHz SPI bus interface VIEW STMicroelectronics
M25P128 128 Mbit (Multilevel), low-voltage, Serial Flash memory with 50-MHz SPI bus interface VIEW Numonyx -> Micron

Share Link : 

All Rights Reserved © qdatasheet.com 2015 - 2020  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]