Qdatasheet_Logo    Integrated circuits, Transistor, Semiconductors Search and Free Datasheet PDF Download Site
Part Number :

5962R8771002VGA View Datasheet(PDF) - Texas Instruments

Part Name5962R8771002VGA TI
Texas Instruments TI
DescriptionLow Power Dual Operational Amplifiers
Direct URL : //www.ti.com/lit/ds/symlink/lm158qml-sp.pdf
LM158QML
www.ti.com
SNOSAP3F – JULY 2005 – REVISED MARCH 2013
LM158QML Low Power Dual Operational Amplifiers
Check for Samples: LM158QML
FEATURES
1
2 Available with Radiation Specification
– High Dose Rate 100 krad(Si)
– ELDRS Free 100 krad(Si)
• Internally Frequency Compensated for Unity
Gain
• Large DC Voltage Gain: 100 dB
• Wide Bandwidth (Unity Gain): 1 MH
z(Temperature Compensated)
• Wide Power Supply Range:
– Single Supply: 3V to 32V
– Or Dual Supplies: ±1.5V to ±16V
• Very Low Supply Current Drain (500 μA)
Essentially Independent of Supply Voltage
• Low Input Offset Voltage: 2 mV
• Input Common-mode Voltage Range Includes
Ground
• Differential Input Voltage Range Equal to the
Power Supply Voltage
• Large Output Voltage Swing: 0V to V+ 1.5V
UNIQUE CHARACTERISTICS
• In the Linear Mode the Input Common-Mode
Voltage Range Includes Ground and the Output
Voltage can also Swing to Ground, even though
Operated from only a Single Power Supply
Voltage.
• The Unity Gain Cross Frequency is Temperature
Compensated.
• The Input Bias Current is also Temperature
Compensated.
ADVANTAGES
• Two Internally Compensated Op Amps
• Eliminates Need for Dual Supplies
• Allows Direct Sensing Near Gnd and VO also
Goes to Gnd
• Compatible with all Forms of Logic
• Power Drain Suitable for Battery Operation
DESCRIPTION
The LM158 series consists of two independent, high
gain, internally frequency compensated operational
amplifiers which were designed specifically to operate
from a single power supply over a wide range of
voltages. Operation from split power supplies is also
possible and the low power supply current drain is
independent of the magnitude of the power supply
voltage.
Application areas include transducer amplifiers, dc
gain blocks and all the conventional op amp circuits
which now can be more easily implemented in single
power supply systems. For example, the LM158
series can be directly operated off of the standard
+5V power supply voltage which is used in digital
systems and will easily provide the required interface
electronics without requiring the additional ±15V
power supplies.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2005–2013, Texas Instruments Incorporated
Direct download click here
 
Share Link : TI

New and Popular Datasheets

CDS-1402  EC10QS04  NCP1612A  L-44HD  BSP88  MM74C32MX  L34YD  PN3642  TSAL4400  STPR820D  2SD2655  FST6230  MC74HC11A  MMSD914  DTD114ES  74GTL1655A  74HCT04  MS2228  FM1608B  FM1608  DI1010  VNK14N04FM  HMC928LP5E  HMC934LP5E  1MBH15D-060  BAT64-06W  BC869  BUY49  MDD172-12N1  S2MF  2N6341  FQB5N20  FQB16N25  SN74CBTLV3253  RURG8060  CPH3114  BPW96B  74F574PC  MC74VHC02  PA52  LM2902  BF771  UC2845B  MC14050B  MMBZ5221BW  BGY787  IP117MHVH  D120LC40B  D120LC40  HER103S 

@ 2014 - 2018  [ Home ] [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]