Qdatasheet_Logo    Integrated circuits, Transistor, Semiconductors Search and Free Datasheet PDF Download Site
Part Number :
Home >>> Texas-Instruments >>> TPS61200 Datasheet



Datasheet PDF

Part NameTPS61200 Texas-Instruments
Texas Instruments Texas-Instruments
DescriptionLow Input Voltage Synchronous Boost Converter With 1.3-A Switches
PDF Download   
TPS61200 image

The TPS6120x devices provide a power supply solution for products powered by either a single-cell, two-cell, or three-cell alkaline, NiCd or NiMH, or one-cell Li-Ion or Li-polymer battery. It is also used in fuel cell or solar cell powered devices where the capability of handling low input voltages is essential. Possible output currents depend on the input to output voltage ratio. The devices provide output currents of up to 600 mA at a 5-V output, while using a single-cell Li- Ion or Li-Polymer battery and discharges it down to 2.6 V. The boost converter is based on a fixed frequency, pulse-width-modulation (PWM) controller using synchronous rectification to obtain maximum efficiency. At low load currents, the converter enters the Power Save mode to maintain a high efficiency over a wide load current range. The Power Save mode can be disabled, forcing the converter to operate at a fixed switching frequency. The average input current is limited to a maximum value of 1500 mA. The output voltage is programmed by an external resistor divider, or is fixed internally on the chip. The converter can be disabled to minimize battery drain. During shutdown, the load is completely disconnected from the battery. The device is packaged in a 10-pin VSON package measuring 3 mm x 3 mm.

• More than 90% Efficiency at
   – 300 mA Output Current at 3.3 V
      (VIN ≥ 2.4 V)
   – 600 mA Output Current at 5 V (VIN ≥ 3 V)
• Automatic Transition between Boost Mode and
   Down Conversion Mode
• Device Quiescent Current Less than 55 μA
• Startup into Full Load at 0.5 V Input Voltage
• Operating Input Voltage Range from
   0.3 V to 5.5 V
• Programmable Undervoltage Lockout Threshold
• Output Short Circuit Protection Under all
   Operating Conditions
• Fixed and Adjustable Output Voltage Options from
   1.8 V to 5.5 V
• Power Save Mode for Improved Efficiency at Low
   Output Power
• Forced Fixed Frequency Operation Possible
• Load Disconnect During Shutdown
• Overtemperature Protection
• Small 3 mm x 3 mm VSON-10 Package

• All Single-Cell, Two-Cell and Three-Cell Alkaline,
   NiCd or NiMH or Single-Cell Li Battery Powered
• Fuel Cell And Solar Cell Powered Products
• Portable Audio Players
• PDAs
• Cellular Phones
• Personal Medical Products
• White LED Driver


Other manufacturer searches related to TPS61200

TPS65263 4.5- to 18-V Input Voltage, 3-A/2-A/2-A Output Current Triple Synchronous Step-Down Converter With I2C Controlled Dynamic Voltage Scaling View Texas Instruments
SC122 Low Voltage Synchronous Boost Converter View Semtech Corporation
LTC3533 2A Wide Input Voltage Synchronous Buck-Boost DC/DC Converter View Linear Technology
TPS63030 High Efficiency Single Inductor Buck-Boost Converter With 1-A Switches View Texas Instruments
TPS61260EVM-673 TPS6126x, Low-Input Voltage, Boost Converter Evaluation Module View Texas Instruments
LTC3400-1 600mA, 1.2MHz Micropower Synchronous Boost Converter in ThinSOT View Linear Technology
BQ24195LRGER I2C Controlled 2.5-A /4.5-A Single Cell USB/Adapter Charger with 5.1 V at 1 A /5.1 V at 2.1 A Synchronous Boost Operation View Texas Instruments
TPS50301-HT 1.6-V to 6.3-V Input, 3-A Synchronous Step-Down SWIFT™ Converter View Texas Instruments
QUJ High Input Voltage, Buck-Boost Converter With 2-A Switch Current View Texas Instruments

Key Word

System  Voltage  Analog  Audio  Axial  Battery  Bipolar  Bridge  Camera  Chip  Clock  Color  Connector  Control  Controller  Converter  Counter  Crystal  Decoder  Digital 

Share Link : Texas-Instruments

All Rights Reserved © qdatasheet.com 2015 - 2018  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]