Qdatasheet_Logo    Integrated circuits, Transistor, Semiconductors Search and Free Datasheet PDF Download Site
Description(P/N) :

P/N + Description + Content Search


AUDIO

  

Datasheet PDF


Part Name(s) : CC8520 CC8520RHAR CC8520RHAT CC8521 CC8521RHAR CC8521RHAT CC8530 CC8530RHAR CC8530RHAT CC8531 CC8531RHAR CC8531RHAT TI
Texas Instruments
Description : 2.4 GHz RF SoC FOR WIRELESS DIGITAL AUDIO STREAMING CC8520, CC8521, CC8530 & CC8531 - PurePath™ Wireless

DESCRIPTION
The PurePath™ Wireless platform is a cost-effective and low-power solution optimized for wireless transmission of high-quality digital audio.
The CC85xx includes a robust built-in wireless audio transmission protocol and can control selected external audio devices. Utilizing numerous coexistence mechanisms allows the CC85xx to avoid interfering with, or being interfered by other 2.4 GHz radio systems.

FEATURES
Built-in audio protocol
- CD-quality uncompressed audio
- Excellent robustness and co-existence through multiple techniques
   - Adaptive Frequency Hopping
   - Forward Error Correction
   - Buffering and Retransmission
   - Error Concealment
   - Optional high quality audio compression
- No software development needed when used in autonomous mode

External system
- Can be used autonomously, or can be controlled by an external host
   MCU for greatest flexibility
- Seamless connection and control of external audio codecs, DACs/ADCs and digital
   audio amplifiers using I2S and I2C
- HID functions like power control, pairing, volume control, audio channel selection etc.
   can be mapped to I/Os
- RoHS compliant 6mm x 6mm QFN-40 package

RF section
- 5 or 2 Mbps over-the-air data rate
- Bandwidth-efficient modulation format
- Excellent link budget with programmable output power up to +3.5 dBm
   and -83/-86 dBm sensitivity
- Seamless support for CC2590 range extender (+11dBm output power, -87dBm sensitivity)
- Suited for systems targeting compliance with worldwide radio frequency regulations: ETSI EN
    300 328 and EN 300 440 class 2 (Europe),
   FCC CFR47 Part 15 (US) and ARIB STD-T66 (Japan)

Digital audio support
- Digital I2S audio interface supports 1 or 2 audio channels for the CC8520 and 1 to 4 audio
   channels for the CC8530 at sample rates of 32, 40.275, 44.1 and 48 kHz, and supports 16
   and 24 bit word-widths
- USB audio support for 32, 44.1 and 48 kHz, and supports 16 and 24 bit word-widths
- Audio latency down to 10.7 ms
- Data side-channel allows data to be sent alongside the audio between external
   host processors USB
- Full-speed USB Audio device
- USB Basic Audio Device Class: HT1, HS1 and MT topologies
   (headphone, headset and microphone)
- USB Audio Device Class.
- Basic USB HID device class support for remote control, mouse and keyboard functionality
- Autonomous operation only.

Development tools
- PC-based PurePath™ Wireless Configurator for CC85xx configuration
- CC85xx Family User Guide
- CC85XXDK audio development kit
- CC85XXDK-HEADSET development kit

APPLICATIONS
- Wireless high-quality digital audio
- Wireless point-to-point audio link
- Wireless (USB) headphones / headsets
- Wireless (USB) loudspeakers
- Wireless (USB) microphones
- Wireless 2.1 speaker systems
- CC852x supports up to 2 channels
- CC853x supports up to 4 channels
- CC85x1 supports USB

View
Part Name(s) : ADV7623 ADV7623BSTZ ADV7623BSTZ-RL ADV7623BSTZ-P ADV7623BSTZ-P-RL EVAL-ADV7623EB1Z ADI
Analog Devices
Description : HDMI Transceiver with Fast Port Switching

GENERAL DESCRIPTION
The ADV7623 is a high performance, four-input, one-output, High-Definition Multimedia Interface (HDMI®) transceiver that integrates HDMI receiver and transmitter functions with digital audio I/Os onto one chip. It supports all HDCP repeater functions through fully tested Analog Devices, Inc., repeater software libraries and drivers.
The ADV7623 incorporates Xpressview™ fast switching on all input HDMI ports. Using an Analog Devices hardware-based HDCP engine that minimizes software overhead, Xpressview technology allows fast switching between any HDMI input ports in less than 1 second.
The ADV7623 supports all mandatory HDMI 3D TV formats in addition to all HDTV formats up to 1080p 36-bit Deep Color. The ADV7623 also features an integrated HDMI CEC controller that supports capability, discovery, and control (CDC).
The ADV7623 has an integrated on-screen display (OSD) feature that allows generation and control of high quality character- and icon-based system status and control displays. Customers interested in using OSD are provided with Analog Devices OSD SDK.
The ADV7623 offers a dedicated flexible audio output port and a dedicated audio input port to allow for easy extraction and insertion of audio data into and out of the HDMI stream. HDMI audio formats, including SACD via DSD and compressed high bit rate audio via HBR, are supported. The ADV7623 also features an audio return channel (ARC) receiver. ARC simplifies cabling by combining upstream audio capability in a conventional HDMI cable.
Fabricated in an advanced CMOS process, the ADV7623 is provided in a 144-lead, 20 mm × 20 mm, Pb-free LQFP and is specified over the 0°C to 70°C temperature range.

FEATURES
  4-input, 1-output multiplexed HDMI transceiver
  Xpressview fast switching on all HDMI input ports
  Character- and icon-based on-screen display (OSD)
  High-Bandwidth Digital Content Protection (HDCP 1.4)
  HDCP repeater support
  225 MHz HDMI Rx and Tx support 36-/30-/24-bit Deep Color
  Supports DVI RGB graphics up to 1600 × 1200 at 60 Hz
  Ultralow jitter digital PLL (100% deskew)
  Quad HDMI Rx input
     Format details available on all unselected ports
     Adaptive equalizer for cable lengths up to 30 meters
     Internal extended display identification data (EDID) RAM
     EDID replication (512 bytes per port)
     EDID with HDMI cable 5 V power support
     5 V detect inputs
     Hot plug assertion control pins
  Single HDMI Tx output
     EDID data extraction
     Hot plug detect (HPD) input
  Audio support
     HDMI-compatible audio interface
     Dedicated flexible audio input/output port
     S/PDIF (IEC 60958-compatible) digital audio input/output
     Super audio CD (SACD) with DSD input/output interface
     High bit rate (HBR) audio
        Dolby® TrueHD
        DTS-HD Master Audio
        Full audio input and output support
  General
     Interrupt controller with 3 interrupt outputs
     STDI (standard identification circuit)
     Software libraries, driver, and application available
     2-layer PCB design supported

APPLICATIONS
  AVRs
  HTiB
  Sound bar with HDMI repeater support
  HBR enabled TVs
  Other repeater applications

View
Part Name(s) : TLV320AIC3110 TLV320AIC3110IRHBR TLV320AIC3110IRHBT TI
Texas Instruments
Description : Low-Power Audio Codec With Audio Processing and Stereo Class-D Speaker Amplifier

Description
The TLV320AIC3110 device is a low-power, highly integrated, high-performance codec that supports stereo audio DAC, and mono audio ADC.
The TLV320AIC3110 device features a high-performance audio codec with 24-bit stereo playback and monaural record functionality. The device integrates several analog features, such as a microphone interface, headphone drivers, and speaker drivers. The digital-audio data format is programmable to work with popular audio standard protocols (I2S, left-justified and right-justified) in master, slave, DSP, and TDM modes. Bass boost, treble, or EQ is supported by the programmable digital-signal processing blocks (PRB). An on-chip PLL provides the high-speed clock required by the digital-signal processing block. The volume level is controlled either by pin control or by register control. The audio functions are controlled using the I2C serial bus.
The TLV320AIC3110 device has a programmable digital sine-wave generator and is available in a 32-pin VQFN package.

Features
• Stereo Audio DAC With 95-dB SNR
• Mono Audio ADC With 91-dB SNR
• Supports 8-kHz to 192-kHz Separate DAC and ADC Sample Rates
• Stereo 1.29-W Class-D BTL 8-Ω Speaker Driver With Direct Battery Connection
• One Differential and Three Single-Ended Inputs With Mixing and Level Controls
• Microphone With Bias, Preamp PGA, and AGC
• Built-in Digital Audio Processing Blocks (PRB) With User-Programmable Biquad, FIR Filters, and DRC
• Digital Mixing Capability
• Programmable Digital Audio Processor for Bass Boost/Treble/EQ With up to Five Biquads for Record and up to Six Biquads for Playback
• Pin Control or Register Control for Digital-Playback Volume-Control Settings
• Digital Sine-Wave Generator for Beeps and Key Clicks
• Integrated PLL Used for Programmable Digital Audio Processor
• I2S, Left-Justified, Right-Justified, DSP, and TDM Audio Interfaces
• I2C Control With Register Auto-Increment
• Full Power-Down Control
• Power Supplies:
   – Analog: 2.7 V–3.6 V
   – Digital Core: 1.65 V–1.95 V
   – Digital I/O: 1.1 V–3.6 V
   – Class-D: 2.7 V–5.5 V (SPLVDD and SPRVDD ≥ AVDD)
• 5-mm × 5-mm 32-VQFN Package

Applications
• Portable Audio Devices
• Mobile Internet Devices
• e-Books

 

View
Part Name(s) : DIX4192 DIX4192I DIX4192IPFB DIX4192IPFBG4 DIX4192IPFBR DIX4192IPFBRG4 DIX4192IPFBT TI
Texas Instruments
Description : IC DIGITAL AUDIO DIT/DIR 48-TQFP

DESCRIPTION
The DIX4192 is a highly-integrated CMOS device designed for use in professional and broadcast digital audio systems. The DIX4192 combines a digital audio interface receiver (DIR) and transmitter (DIT), two audio serial ports, and flexible distribution logic for interconnection of the function block data and clocks.
The DIR and DIT are compatible with the AES3, S/PDIF, IEC 60958, and EIAJ CP-1201 interface standards.
The audio serial ports and DIT may be operated at sampling rates up to 216kHz. The DIR lock range includes sampling rates from 20kHz to 216kHz.

FEATURES
• Digital Audio Interface Transmitter (DIT)
– Supports Sampling Rates Up to 216kHz
– Includes Differential Line Driver and CMOS Buffered Outputs
– Block-Sized Data Buffers for Both Channel Status and User Data
– Status Registers and Interrupt Generation for Flag and Error Conditions
• Digital Audio Interface Receiver (DIR)
– PLL Lock Range Includes Sampling Rates from 20kHz to 216kHz
– Includes Four Differential Input Line Receivers and an Input Multiplexer
– Bypass Multiplexer Routes Line Receiver Outputs to Line Driver and Buffer Outputs
– Block-Sized Data Buffers for Both Channel Status and User Data
– Automatic Detection of Non-PCM Audio Streams (DTS CD/LD and IEC 61937 formats)
Audio CD Q-Channel Sub-Code Decoding and Data Buffer
– Status Registers and Interrupt Generation for Flag and Error Conditions
– Low Jitter Recovered Clock Output
• User-Selectable Serial Host Interface: SPI™ or I2C™
– Provides Access to On-Chip Registers and Data Buffers
• Two Audio Serial Ports (Ports A and B)
– Synchronous Serial Interface to External Signal Processors, Data Converters, and Logic
– Slave or Master Mode Operation with Sampling Rates up to 216kHz
– Supports Left-Justified, Right-Justified, and Philips I2S™ Data Formats
– Supports Audio Data Word Lengths Up to 24 Bits
• Four General-Purpose Digital Outputs
– Multifunction Programmable Via Control Registers
• Extensive Power-Down Support
– Functional Blocks May Be Disabled Individually When Not In Use
• Operates From +1.8V Core and +3.3V I/O Power Supplies
• Small TQFP-48 Package, Compatible with the SRC4382 and SRC4392

APPLICATIONS
• DIGITAL AUDIO RECORDERS AND MIXING DESKS
• DIGITAL AUDIO INTERFACES FOR COMPUTERS
• DIGITAL AUDIO ROUTERS AND DISTRIBUTION SYSTEMS
• BROADCAST STUDIO EQUIPMENT
• DVD/CD RECORDERS
• SURROUND SOUND DECODERS AND A/V RECEIVERS
• CAR AUDIO SYSTEMS

View
Part Name(s) : DIX4192 DIX4192I DIX4192IPFB DIX4192IPFBG4 DIX4192IPFBR DIX4192IPFBRG4 DIX4192IPFBT BB
Burr-Brown -> Texas Instruments
Description : Integrated Digital Audio Interface Receiver and Transmitter

DESCRIPTION
The DIX4192 is a highly-integrated CMOS device designed for use in professional and broadcast digital audio systems. The DIX4192 combines a digital audio interface receiver (DIR) and transmitter (DIT), two audio serial ports, and flexible distribution logic for interconnection of the function block data and clocks.
The DIR and DIT are compatible with the AES3, S/PDIF, IEC 60958, and EIAJ CP-1201 interface standards.
The audio serial ports and DIT may be operated at sampling rates up to 216kHz. The DIR lock range includes sampling rates from 20kHz to 216kHz.

FEATURES
• Digital Audio Interface Transmitter (DIT)
– Supports Sampling Rates Up to 216kHz
– Includes Differential Line Driver and CMOS Buffered Outputs
– Block-Sized Data Buffers for Both Channel Status and User Data
– Status Registers and Interrupt Generation for Flag and Error Conditions
• Digital Audio Interface Receiver (DIR)
– PLL Lock Range Includes Sampling Rates from 20kHz to 216kHz
– Includes Four Differential Input Line Receivers and an Input Multiplexer
– Bypass Multiplexer Routes Line Receiver Outputs to Line Driver and Buffer Outputs
– Block-Sized Data Buffers for Both Channel Status and User Data
– Automatic Detection of Non-PCM Audio Streams (DTS CD/LD and IEC 61937 formats)
Audio CD Q-Channel Sub-Code Decoding and Data Buffer
– Status Registers and Interrupt Generation for Flag and Error Conditions
– Low Jitter Recovered Clock Output
• User-Selectable Serial Host Interface: SPI™ or I2C™
– Provides Access to On-Chip Registers and Data Buffers
• Two Audio Serial Ports (Ports A and B)
– Synchronous Serial Interface to External Signal Processors, Data Converters, and Logic
– Slave or Master Mode Operation with Sampling Rates up to 216kHz
– Supports Left-Justified, Right-Justified, and Philips I2S™ Data Formats
– Supports Audio Data Word Lengths Up to 24 Bits
• Four General-Purpose Digital Outputs
– Multifunction Programmable Via Control Registers
• Extensive Power-Down Support
– Functional Blocks May Be Disabled Individually When Not In Use
• Operates From +1.8V Core and +3.3V I/O Power Supplies
• Small TQFP-48 Package, Compatible with the SRC4382 and SRC4392

APPLICATIONS
• DIGITAL AUDIO RECORDERS AND MIXING DESKS
• DIGITAL AUDIO INTERFACES FOR COMPUTERS
• DIGITAL AUDIO ROUTERS AND DISTRIBUTION SYSTEMS
• BROADCAST STUDIO EQUIPMENT
• DVD/CD RECORDERS
• SURROUND SOUND DECODERS AND A/V RECEIVERS
• CAR AUDIO SYSTEMS

View
Part Name(s) : SII9134CBHU SIL9134CTU SII9134 Unspecified1
Unspecified
Description : VastLane™ HDMI Transmitter

[Silicon Image, Inc.]

VastLane™ HDMI Transmitter
HDMI 1.3 Transmitter with Deep Color, High Bit-Rate HD Audio Support

The SiI9134 is an advanced HDMI 1.3 transmitter designed for next generation Blu-Ray and HD-DVD players and recorders that require high-definition audio and Deep Color capabilities. SiI9134 supports up to 1080p resolution at 60Hz and 36-bit color depth and Dolby® True HD and DTS-HD high bit-rate audio formats to deliver a rich digital video and audio experience.
SiI9134 will fit directly into home theater products such as DVD players and recorders, A/V receivers, digital set-top boxes and personal video recorders (PVRs). The SiI9134 is backward compatible with first and second generation HDMI transmitters. To reduce system cost, the SiI9134 includes an additional I2C master port to control the DDC bus.
In addition to supporting advanced HDMI 1.3 video features, the SiI9134 supports DVD audio with 7.1-surround at 192kHz, SACD audio standards, and stereo audio at 192kHz.
The built-in High-bandwidth Digital Content Protection (HDCP) encryption engine secures the digital link for transmission of valuable high-definition video and audio. Each SiI9134 is pre-programmed with unique HDCP keys, providing an extremely high level of security while reducing manufacturing complexity and cost.

SiI9134 Features
Industry-Standard Compliance
• HDMI 1.3
• DVI 1.0
• EIA/CEA-861D
• HDCP 1.1

Power Management
• 1.8V core provides low-power operation
• Flexible power-down modes

Digital Video Output
• Integrated HDMI 1.3 TMDS core running at 225MHz
• Supports Deep Color 36-bit color depth and resolutions up to 1080p @ 60Hz or 720p/1080i @ 120Hz
• Flexible video interface supports DVD and HD MPEG decoders:
   - 12/24/30/36-bit RGB YCbCr 4:4:4
   - 16/20/24/30/36-bit YCbCr 4:2:2
   - 8/10/12-bit YCbCr 4:2:2 (ITU-R BT.601 & BT.656)
• Integrated YCbCr to RGB conversion
• 4:2:2 to 4:4:4 up-converter
• Programmable Data Enable (DE) generator
• 14-bit internal video processing and 14-bit to 12/10/8-bit dither

Digital Audio Output
• Supports Dolby® True HD and DTS-HD up to 24Mb/s through 4xI2S inputs
• DVD-Audio support through 4xI2S inputs
• Dedicated 8-pin interface to support Direct Stream Digital (DSD) Super Audio SACD
• Supports 2-channel audio at 192kHz and 8-channel audio at 192kHz
• Supports IEC60958 2-channel PCM or IEC61937 compressed audio (Dolby® Digital, DTS, etc.)
• Industry-standard S/PDIF output

Content Protection
• Integrated HDCP cipher engine
• Pre-programmed HDCP keys:
   - Simplify manufacturing process
   - Provide extremely secure solution
   - Lower system, manufacturing costs
• Encrypts both video and audio

System Operation
• Register-programmable via slave I2C interface
• Master I2C simplifies system design
• Flexible interrupt registers with interrupt pin
• Monitor detection supported through hot plug and receiver detection
• Device address can be altered with CI2CA pin

View
Part Name(s) : GS9023A GS9023ACFY Gennum
Gennum -> Semtech
Description : GENLINX™ IIGS9023A Embedded Audio CODEC

BRIEF DESCRIPTION
The GS9023A is a highly integrated, single chip solution for the multiplexing/demultiplexing of digital audio channels into and out of digital video signals. The GS9023A supports the multiplexing/demultiplexing of 20 or 24-bit synchronous audio data with a 48kHz sample rate.
Audio signals with different sample rates may be sample rate converted to 48kHz before and after the GS9023A using audio sample rate converters.

KEY FEATURES
• single chip embedded audio solution
• operates as an embedded audio multiplexer or demultiplexer
• full support for 48kHz synchronous 20/24bit audio
• 4 channels of audio per GS9023A
• cascadable architecture supports additional audio channels
• multiplexes and demultiplexes arbitrary ANC data packets
• support for 143, 177, 270, 360 and 540 Mb/s video standards
• full processing of audio parity, channel status and user data
• multiplexes and demultiplexes audio control packets
• EDH generation and insertion when in Multiplex Mode
• 3.3V core with 3.3V or 5VI/O (requires 5V supply)
• complies with SMPTE 272M A, B, and C

APPLICATIONS
SDI Embedded Audio

View
Part Name(s) : GS9023B GS9023BCVE3 Gennum
Gennum -> Semtech
Description : GENLINX® II GS9023B Embedded Audio CODEC

Brief Description
The GS9023B is a highly integrated, single chip solution for the multiplexing/demultiplexing of digital audio channels into and out of digital video signals. The GS9023B supports the multiplexing/demultiplexing of 20 or 24-bit synchronous audio data with a 48kHz sample rate. Audio signals with different sample rates may be sample rate converted to 48kHz before and after the GS9023B using audio sample rate converters.

Key Features
• single chip embedded audio solution
• operates as an embedded audio multiplexer or demultiplexer
• full support for 48kHz synchronous 20/24 bit audio
• 4 channels of audio per GS9023B
• cascadable architecture supports additional audio channels
• multiplexes and demultiplexes arbitrary ANC data packets
• support for 143, 177, 270, 360 and 540 Mb/s video standards
• full processing of audio parity, channel status and user data
• multiplexes and demultiplexes audio control packets
• EDH generation and insertion when in Multiplex Mode
• 3.3V core with 3.3V or 5V I/O (requires 5V supply)
• complies with SMPTE 272M A, B, and C

Applications
SDI Embedded Audio

View
Part Name(s) : GS9023 GS9023-CFY Gennum
Gennum -> Semtech
Description : GENLINX™II GS9023 Embedded Audio CODEC

DESCRIPTION
The GS9023 is a highly integrated, single chip solution for the multiplexing/demultiplexing of digital audio channels into and out of digital video signals. The GS9023 supports the multiplexing/demultiplexing of 20 or 24 bit synchronous audio data with a 48kHz sample rate. Audio signals with different sample rates may be sample rate converted to 48kHz before and after the GS9023 using audio sample rate converters.

FEATURES
• single chip embedded audio solution
• operates as an embedded audio multiplexer or demultiplexer
• full support for 48kHz synchronous 20/24 bit audio
• 4 channels of audio per GS9023
• cascadable architecture supports additional audio channels
• multiplexes and demultiplexes arbitrary ANC data packets
• support for 143, 177, 270, 360 and 540 Mb/s video standards
• full processing of audio parity, channel status and user data
• multiplexes and demultiplexes audio control packets
• EDH generation and insertion when in Multiplex Mode
• 3.3V core with 3.3V or 5V I/O (requires 5V supply)
• complies with SMPTE 272M A, B, and C

APPLICATIONS
SDI Embedded Audio

View
Part Name(s) : ALC250 ETC2
Unspecified
Description : TWO CHANNEL AC’97 2.3 AUDIO CODEC with EQUALIZER

[Realtek Semiconductor Corp.]

General Description
The ALC250 is a 20-bit DAC and 18-bit ADC full duplex AC97 2.3 compatible stereo audio CODEC designed for PC multimedia systems, including host/soft audio and AMR/CNR based designs. The ALC250 incorporates proprietary converter technology to achieve a high SNR, greater than 100 dB, sensing logics for device reporting and Universal Audio Jack® to improve user interface. The ALC250 AC97 CODEC supports multiple CODEC extensions with independent variable sampling rates and built-in 3D effects. The ALC250 CODEC provides two pairs of stereo outputs with independent volume controls, a mono output, and multiple stereo and mono inputs, along with flexible mixing, gain and mute functions to provide a complete integrated audio solution for PCs. The circuitry of the ALC250 CODEC operates from a +3.3V digital power and +5V analog power supply with EAPD (External Amplifier Power Down) control for use in notebook and PC applications. The ALC250 integrates a 50mW/20Ω headset audio amplifier into the CODEC, saving BOM costs. The ALC250 also supports the SPDIF out function, which is compliant to AC97 2.3, which can offer easy connection of PCs to consumer electronic products, such as AC3 decoder/speaker and mini disk devices. The ALC250 CODEC supports host/soft audio from Intel ICHx chipsets as well as audio controller based VIA/SIS/ALI/AMD/nVIDIA/ ATI chipset.

Features
● Built- in 7 Bands of Digital Hardware Equalizer for Optimizing Speaker Response
● Single chip with high S/N ratio (>100 dB)
● Meets performance requirements for audio on PC99/2001 systems
● Meets Microsoft WHQL/WLP 2.0 audio requirements
● 20-bit DAC and 18-bit ADC resolution
● Compliant with AC’97 2.3 specifications
   -LINE/HP-OUT, MIC-IN and LINE-IN sensing
   -14.318MHz-Æ24.576MHz PLL saves crystal
   -12.288MHz BITCLK input can be consumed
   -Integrated PCBEEP generator to save buzzer
   -Interrupt capability
   -Page registers and Analog Plug&Play
● Support of S/PDIF out is fully compliant with AC’97 rev2.3 specifications
● Three analog line-level stereo inputs with 5-bit volume control: LINE_IN, CD, AUX
● High quality differential CD input
● Two analog line-level mono input: PCBEEP, PHONE-IN
● Supports double sampling rate (96KHz) of DVD audio playback
● Two software selectable MIC inputs
● +6/12/20/30dB boost preamplifier for MIC input
● Stereo output with 6-bit volume control
● Mono output with 5-bit volume control
● Headphone output with 50mW/20Ω amplifier
● 3D Stereo Enhancement
● Multiple CODEC extension capability
● External Amplifier Power Down (EAPD) capability
● Power management and enhanced power saving features
● Stereo MIC record for AEC/BF application
● DC Voltage volume control
● Auxiliary power to support Power Off CD
● Adjustable VREFOUT control
● EQ operation can be controlled by 2 pins of serial bus
● 2 Universal Audio Jack (UAJ)® for front panel
● Support 32K/44.1K/48K/96KHz of S/PDIF output
● Support 32K/44.1K/48KHz of S/PDIF input
● Power support: Digital: 3.3V; Analog: 3.3V/5V
● Standard 48-Pin LQFP Package
● EAX™ 1.0&2.0 compatible
● Direct Sound 3D™ compatible
● A3D™ compatible
● I3DL2 compatible
● HRTF 3D Positional Audio
● Sensaura™ 3D Enhancement (optional)
● 10 Bands of Software Equalizer
● Voice Cancellation and Key Shifting in Kara OK mode
● AVRack® Media Player
● Configuration Panel to improve Experience of User

View
1234567891011121314151617181920 Next



@ 2015 - 2018  [ Home ] [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]