Qdatasheet_Logo    Integrated circuits, Transistor, Semiconductors Search and Free Datasheet PDF Download Site
Part Number :

P/N + Description + Content Search

Search Words :

Part Name(s) : SM5021 SM5021A SM5021B SamHop
Samhop Mircroelectronics
Description : Encoder. For SM3015 fan remote Control, audio remote Control, toy remote Control, consumer products remote Control

The SM5021A/B is a high performance infrared remote Control encoder utilizing CMOS technology. Mode A is a signal-key Control and mode B is a multi-key Control during data transmission, supports eight data key inputs and a LED output to indicate the status during transmission.

* Wide operation voltage range, 2.4V to 6V
* Eight data key Control
* Option of signal-key or multi-key Control
* Two custom codes to separate products
* Auto power off for saving power
* LED output to indicate transmission status
* Direct infrared LED 38KHz modulation output
* Low power consumption
* Paired with SM5032 decoder
* 16 pin DIP or SO package

Part Name(s) : AN5270 Panasonic
Panasonic Corporation
Description : 4.3 W ×1(8Ω) Power Amplifier with Volume Control and Tone Control

The AN5720 is an integrated circuit designed for 4.3 W(8 Ω) power amplifier with volume Control and tone Control.

•DC volume Control : 0 to 5 V
•DC tone Control : 0 to 5 V
•9-lead single-in-line plastic package with fin

Part Name(s) : MTD2002F Shindengen
Description : Constant Current Control Function (Fixed Frequency PWM Control)

Constant Current Control Function (Fixed Frequency PWM Control)
4-Phase Input
2-bit Digital Current Selection
Noise Cancellation Function
Cross Conduction Protection
Thermal Shutdown Function
Stand-by Function
Built-in Flywheel and Flyback Diodes

Part Name(s) : M62495AFP M62495 Mitsubishi
Description : TONE Control/VOLUME Control

The M62495AFP is a sound Controller IC developd mini-stereo set,general audio equipment.
By serial data from microcomputer, it can realize sound Controller of selecter and 2band tone Control easily.

■ Input selector (4mode)
■ Volume(0 ~ -84dB,the infinitesimal)
■ REC OUT(on/off SW) or MIC mixing
■ 20dB amp
■ T one Control(Bass/Treble)
■ Stereo/mono.SW


Part Name(s) : M51660 M51660E M51660L Mitsumi
Description : SERVO MOTOR Control FOR RADIO Control

The M51660L is a semiconductor integrated circuit for use in servo motor Control in radio Control applications.
Housed in a 14-pin molded plastic zig-zag inline package (ZIP), the M51660L contributes to the miniaturization of the set. The built-in voltage regulating circuit, and the differential comparator used in the comparator circuit provide the M51660L with extremely stable power supply voltage fluctuation characteristics and temperature change characteristics.

● Small circuit current • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 3.5mA typ.
                                                                             (When output is off)
● Excellent power supply and temperature stability
● Simple setting of dead band
● Includes protection circuit for continuous “H” level input

Digital proportional system for radio Control, and servo motor Control circuit, etc.


Part Name(s) : LC7535M SANYO
SANYO -> Panasonic
Description : Electronic Volume/Loudness Control with Serial Data Control and High Voltage-Handling Capacity

The LC7535M is an electronic volume and loudness Control IC that provides volume, balance, and loudness functions with a minimal number of external components and that can be Controlled electronically.

• Volume: Provides 81 positions from 0 dB to –79 dB in
   1-dB steps and –∞. A balance function can be
   implemented by Controlling the left and right volume
   levels independently.
• Loudness: A loudness function can be implemented by
   attaching external capacitors at the output tap provided
   at the –20-dB position in the 5-dB step volume Control.
• S (select) pin: Up to two LC7535M chips can be used on
   the same bus.
• Serial data input: The LC7535M supports
   communication with the Controller in the CCB format.

• High voltage-handling capacity: ±16 V.

Part Name(s) : LM3464 LM3464MH LM3464MHX LM3464AMH LM3464A LM3464AMHX National-Semiconductor
National ->Texas Instruments
Description : LED Driver with Dynamic Headroom Control and Thermal Control Interfaces

General Description
The LM3464/64A is a 4-channel high voltage current regula tor that provides a simple solution for LED lighting applica tions. The LM3464/64A provides four individual current regulator channels and works in conjunction with external N channel MOSFETs and sense resistors to give accurate driving current for every LED string. Additionally, the Dynamic Headroom Control (DHC) output can be interfaced to the external power supply to adjust the LED supply voltage to the lowest level that is adequate to maintain all the string currents in regulation, yielding the optimal overall efficiency.

■ Wide input voltage range
  12V-80V (LM3464)
  12V–95V (LM3464A)
■ Dynamic Headroom Control ensures maximum efficiency
■ 4 output channels with individual current regulation
■ High channel to channel accuracy
■ Digital PWM/Analog dimming Control interface
■ Resistor programmable dimming frequency & minimum duty cycle (analog dimming mode)
■ Direct interface to thermal sensor
■ Fault detection
■ Over temperature protection
■ Thermal shutdown
■ Under voltage lockout
■ Thermal enhanced eTSSOP-28 package

■ Streetlights
■ Solid State Lighting Solutions

Part Name(s) : LS7541 LS7541-S LSI
LSI Corporation

The LS7541 is a CMOS integrated circuit which provides trigger pulses for triac phase Control of incandescent lamps. The circuits are designed to operate with a wide variety of lamp sizes ranging from small table lamps to large floor lamps. The AGC Loop automatically adjusts Touch Sensitivity to be independent of lamp size.

• Touch Sensitivity guaranteed to 600pF Touch Plate Capacitance.
• Touch Operation independent of line plug polarity.
• Pin selection of three available Brightness Step Sequences.
• Minimal external components.
• AGC Loop stabilizes immediately after Power-Up.
• Brightness state is Off after AC power applied.
• Brightness state is unchanged if AC power interrupted for < 0.5 sec.
• Advanced CMOS design for reliable operating characteristics and low power.
• 50/60 Hz Line Frequency.
• 5V Operation (VDD - VSS).
• LS7541 (DIP); LS7541-S (SOIC)

• Screw-in and built-in adapter modules for converting
table and floor lamps to touch Control for step dimming.
• On-Off touch Control of under-cabinet fluorescent lamps.

Part Name(s) : LM3463 LM3463SQ LM3463SQ/NOPB LM3463SQX LM3463SQX/NOPB TI
Texas Instruments
Description : Dynamic Headroom Controller with Thermal Control Interface and Individual Channel Dimming Control

The LM3463 is a six channel linear LED driver with Dynamic Headroom Control (DHC) interface that is specialized for high power LED lighting applications. The variation of the output current of every output channel in the temperature range of -40°C to 125°C is well Controlled to less than ±1%. The output current of every channel is accurately matched to each other with less than ± 1% difference as well.
By interfacing the LM3463 to the output voltage feedback node of a switching power supply via the DHC interface, the system efficiency is optimized automatically. The dynamic headroom Control circuit in the LM3463 minimizes power dissipation on the external MOSFETs by adjusting the output voltage of the primary switching power supply according to the changing forward voltage of the LEDs. Comprising the advantages of linear and switching converters, the LM3463 delivers accurately regulated current to LEDs while maximizing the system efficiency.
The dimming Control interface of the LM3463 accepts both analog and PWM dimming Control signals. The analog dimming Control input Controls the current of all LEDs while the PWM Control inputs Control the dimming duty of output channels individually.

• Dynamic Headroom Control Output to
   Maximize Efficiency
• 6 Channels Current Regulated LED Driver
• High Precision Analog Dimming Control
• 4 Individual PWM Dimming Control Input
• Dimming Control via Digital Data Bus
• Built-In Maximum MOSFET Power Limiting
• Allows Cascade Operation to Extend the
   Output Channels
• Fault Indicator Output
• Thermal Shutdown
• UVLO With Hysteresis
• 48L WQFN Package

• Wide supply voltage range (12V-95V)
• Thermal fold-back dimming Control
• DHC regulates the lowest MOSFET drain
   voltage to 1V

• Streetlights
• Solid State Lighting Solutions

12345678910 Next

All Rights Reserved © qdatasheet.com 2015 - 2019  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]