Qdatasheet_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Searchword :
Fairchild
Fairchild Semiconductor
Description : Low Power OCTAL ECL/TTL Bidirectional TRANSLATOR WITH Register

General Description
The 100329A is an OCTAL registered bidirectional TRANSLATOR designed to convert TTL logic levels to 100K ECL logic levels and vice versa. The direction of the translation is determined by the DIR input. A LOW on the output enable input (OE) holds the ECL OUTPUTS in a cut-off state and the TTL OUTPUTS at a high impedance level. The OUTPUTS change synchronously WITH the rising edge of the clock input (CP) even though only one output is enabled at the time.
The cut-off state is designed to be more negative than a normal ECL LOW level. This allows the output emitter-followers to turn off when the termination supply is −2.0V, presenting a high impedance to the data bus. This high impedance reduces the termination power and prevents loss of low state noise margin when several loads share the bus.

Features
■ Bidirectional translation
■ ECL high impedance OUTPUTS
■ Registered OUTPUTS
■ FAST TTL OUTPUTS
3-STATE OUTPUTS
■ Voltage compensated operating range = −4.2V to −5.7V
■ High drive IOS

 

Description : Low Power OCTAL ECL/TTL Bidirectional TRANSLATOR WITH Register

General Description
The 100329 is an OCTAL registered bidirectional TRANSLATOR designed to convert TTL logic levels to 100K ECL logic levels and vice versa. The direction of the translation is determined by the DIR input. A LOW on the output enable input (OE) holds the ECL OUTPUTS in a cut-off state and the TTL OUTPUTS at a high impedance level. The OUTPUTS change synchronously WITH the rising edge of the clock input (CP) even though only one output is enabled at the time.
The cut-off state is designed to be more negative than a normal ECL LOW level. This allows the output emitter-followers to turn off when the termination supply is −2.0V, presenting a high impedance to the data bus. This high impedance reduces the termination power and prevents loss of low state noise margin when several loads share the bus.

Features
■ Bidirectional translation
■ ECL high impedance OUTPUTS
■ Registered OUTPUTS
■ FAST TTL OUTPUTS
3-STATE OUTPUTS
■ Voltage compensated operating range = −4.2V to −5.7V
■ High drive IOS

 

Motorola
Motorola => Freescale
Description : 9−Bit ECL/TTL TRANSLATOR

9−Bit ECL/TTL TRANSLATOR

The MC10H/100H601 is a 9–bit, dual supply ECL to TTL TRANSLATOR. Devices in the Motorola 9–bit TRANSLATOR series utilize the 28–lead PLCC for optimal power pinning, signal flow–through and electrical performance.
The devices feature a 48 mA TTL output stage, and AC performance is specified into both a 50 pF and 200 pF load capacitance. For the 3–state output disable, both ECL and TTL control inputs are provided, allowing maximum design flexibility.
The 10H version is compatible WITH MECL 10H ECL logic levels. The 100H version is compatible WITH 100K levels.

• 9–Bit Ideal for Byte–Parity Applications
• 3–State TTL OUTPUTS
• Flow–Through Configuration
• Extra TTL and ECL Power Pins to Minimize Switching Noise
• ECL and TTL 3–State Control Inputs
• Dual Supply
• 4.8 ns Max Delay into 50 pF, 9.6 ns into 200 pF (all OUTPUTS switching)
• PNP TTL Inputs for Low Loading

Description : Low Power OCTAL ECL/TTL Bi-Directional TRANSLATOR WITH Latch

General Description
The 100328 is an OCTAL latched bi-directional TRANSLATOR designed to convert TTL logic levels to 100K ECL logic levels and vice versa. The direction of this translation is determined by the DIR input. A LOW on the output enable input (OE) holds the ECL OUTPUTS in a cut-off state and the TTL OUTPUTS at a high impedance level. A HIGH on the latch enable input (LE) latches the data at both inputs even though only one output is enabled at the time. A LOW on LE makes the 100328 transparent.

Features
■ Identical performance to the 100128 at 50% of the supply current
■ Bi-directional translation
■ 2000V ESD protection
■ Latched OUTPUTS
■ FAST TTL OUTPUTS
3-STATE OUTPUTS
■ Voltage compensated operating range = −4.2V to −5.7V
■ Available to industrial grade temperature range

 

Motorola
Motorola => Freescale
Description : Registered Hex TTL/ECL TRANSLATOR

Registered Hex TTL/ECL TRANSLATOR

The MC10H/100H604 is a 6–bit, registered, dual supply TTL to ECL TRANSLATOR. The device features differential ECL OUTPUTS as well as a choice between either a differential ECL clock input or a TTL clock input. The asynchronous master reset control is an ECL level input..
WITH its differential ECL OUTPUTS and TTL inputs the H604 device is ideally suited for the transmit function of a HPPI bus type board–to–board interface application. The on chip registers simplify the task of synchronizing the data between the two boards.
The device is available in either ECL standard: the 10H device is compatible WITH MECL 10KH logic levels while the 100H device is compatible WITH 100K logic levels.

• Differential 50Ω ECL OUTPUTS
• Choice Between Differential ECL or TTL Clock Input
• Dual Power Supply
• Multiple Power and Ground Pins to Minimize Noise
• Specified WITHin–Device Skew

Description : Quad TTL-to-ECL TRANSLATOR WITH ECL Strobe

Quad TTL to ECL TRANSLATOR WITH ECL Strobe

Description
The MC10H424 is a Quad TTL−to−ECL TRANSLATOR WITH an ECL strobe. Power supply requirements are ground, +5.0 V, and −5.2 V.

Features
• Propagation Delay, 1.5 ns Typical
• Improved Noise Margin 150 mV (Over Operating Voltage and
Temperature Range)
• Voltage Compensated
• MECL 10K™ Compatible
• Pb−Free Packages are Available*

 

Motorola
Motorola => Freescale
Description : Registered Hex ECL/TTL TRANSLATOR

Registered Hex ECL/TTL TRANSLATOR

The MC10/100H605 is a 6–bit, registered, dual supply ECL to TTL TRANSLATOR. The device features differential ECL inputs for both data and clock. The TTL OUTPUTS feature balanced 24mA sink/source capabilities for driving transmission lines.
WITH its differential ECL inputs and TTL OUTPUTS the H605 device is ideally suited for the receive function of a HPPI bus type board–to–board interface application. The on chip registers simplify the task of synchronizing the data between the two boards.

• Differential ECL Data and Clock Inputs
• 24mA Sink, 24mA Source TTL OUTPUTS
• Dual Power Supply
• Multiple Power and Ground Pins to Minimize Noise
• 2.0ns Part–to–Part Skew

Description : 9−Bit ECL to TTL TRANSLATOR

Description
The MC10H/100H601 is a 9−bit, dual supply ECL to TTL TRANSLATOR. Devices in the ON Semiconductor 9−bit TRANSLATOR series utilize the 28−lead PLCC for optimal power pinning, signal flow−through and electrical performance.
The devices feature a 48 mA TTL output stage, and AC performance is specified into both a 50 pF and 200 pF load capacitance. For the 3−state output disable, both ECL and TTL control inputs are provided, allowing maximum design flexibility.
The 10H version is compatible WITH MECL 10H™ ECL logic levels. The 100H version is compatible WITH 100K levels.

Features
• 9−Bit Ideal for Byte−Parity Applications
• 3−State TTL OUTPUTS
• Flow−Through Configuration
• Extra TTL and ECL Power Pins to Minimize Switching Noise
• ECL and TTL 3−State Control Inputs
• Dual Supply
• 4.8 ns Max Delay into 50 pF, 9.6 ns into 200 pF (all OUTPUTS Switching)
• PNP TTL Inputs for Low Loading
• Pb−Free Packages are Available*

Fairchild
Fairchild Semiconductor
Description : Low Power 9-Bit ECL-TO-TTL TRANSLATOR WITH Latches

General Description
The 100393 is a 9-bit TRANSLATOR for converting F100K logic levels to TTL logic levels. A LOW on the latch enable (LE) latches the data at the input state. A HIGH on the LE makes the latches transparent. A HIGH on either the ECL or TTL output enable (OE ECL or OE TTL), holds the OUTPUTS in a high impedance state.
The 100393 is designed WITH TTL, 64 mA OUTPUTS for Bus Driving capability. All ECL inputs have 50 kΩ pull-down resistors. When the inputs are either unconnected or at the same potential, the OUTPUTS will go LOW.

Features
■ 64 mA IOL drive capability
■ 2000V ESD protection
■ −4.2V to −5.7V operating range
■ Latched OUTPUTS
■ TTL OUTPUTS

Motorola
Motorola => Freescale
Description : 9-Bit TTL/ECL TRANSLATOR

The MC10H/100H600 is a 9–bit, dual supply TTL to ECL TRANSLATOR.
Devices in the Motorola 9–bit TRANSLATOR series utilize the 28–lead PLCC for optimal power pinning, signal flow–through and electrical performance.
The H600 features both ECL and TTL logic enable controls for maximum flexibility.
The 10H version is compatible WITH MECL 10H ECL logic levels. The 100H version is compatible WITH 100K levels.
   
• 9–Bit Ideal for Byte–Parity Applications
• Flow–Through Configuration
• Extra TTL and ECL Power/Ground Pins to Minimize Switching Noise
• ECL and TTL Enable Inputs
• Dual Supply
• 3.5 ns Max D to Q
• PNP TTL Inputs for Low Loading
• Choice of ECL Compatibility: MECL 10H (10Hxxx) or 100K (100Hxxx)
   

12345678910 Next


All Rights Reserved © qdatasheet.com [ Privacy Policy ] [ Contact Us ]