Qdatasheet_Logo    Integrated circuits, Transistor, Semiconductors Search and Free Datasheet PDF Download Site
Part Number :
Home  >>>  DAC081C081CIMK/NOPB Datasheet

DAC081C081CIMK/NOPB

  

Datasheet PDF

Match, Like DAC081C081CIMK/NOPB
Start with N/A
End N/A
Included N/A

DAC081C081CIMK/NOPB[8-Bit Micro Power Digital-to-Analog Converter with an I2C Compatible Interface]

other part :DAC081C081   DAC081C085   DAC081C081CIMK   DAC081C081CISD/NOPB   DAC081C085CIMM/NOPB   DAC081C081CIMKX/NOPB   DAC081C081CISDX/NOPB  

Description
The DAC081C08x device is an 8-bit, single-channel, voltage-output digital-to-analog converter (DAC) that operates from a 2.7-V to 5.5-V supply. The output amplifier allows rail-to-rail output swing and has an 4.5-µsec settling time. The DAC081C081 uses the supply voltage as the reference to provide the widest dynamic output range and typically consumes 132 µA while operating at 5 V. It is available in 6-lead SOT and WSON packages and provides three address options (pin selectable).
As an alternative, the DAC081C085 provides nine I2C addressing options and uses an external reference. It has the same performance and settling time as the DAC081C081. It is available in an 8-lead VSSOP.
The DAC081C081 and DAC081C085 use a 2-wire, I2C-compatible serial interface that operates in all three speed modes, including high-speed mode (3.4 MHz). An external address selection pin allows up to three DAC081C081 or nine DAC081C085 devices per 2-wire bus. Pin-compatible alternatives to the DAC081C081 are available that provide additional address options.

Features
• Ensured Monotonicity to 8-bits
• Low Power Operation: 156 µA Maximum at 3.3 V
• Extended Power Supply Range (2.7 V to 5.5 V)
• I2C-Compatible 2-Wire Interface Which Supports
   Standard (100-kHz), Fast (400-kHz), and High
   Speed (3.4-MHz) Modes
• Rail-to-Rail Voltage Output
• Very Small Package
• Resolution 8 Bits
• INL ±0.6 LSB (Maximum)
• DNL ±0.1 LSB (Maximum)
• Settling Time 4.5 μs (Maximum)
• Zero Code Error +10 mV (Maximum)
• Full-Scale Error −0.7 %FS (Maximum)
• Supply Power
   – Normal
   – 380 μW (3 V)
   – 730 μW (5 V) Typical
   – Power Down
   – 0.5 μW (3 V)
   – 0.9 μW (5 V) Typical

Applications
• Industrial Process Control
• Portable Instruments
• Digital Gain and Offset Adjustments
• Programmable Voltage and Current Sources
• Test Equipment

Texas Instruments
TI

View
1
 

Key Word

System  Voltage  Analog  Audio  Axial  Battery  Bipolar  Bridge  Camera  Chip  Clock  Color  Connector  Control  Controller  Converter  Counter  Crystal  Decoder  Digital 

All Rights Reserved © qdatasheet.com 2015 - 2018  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]