Qdatasheet_Logo    Integrated circuits, Transistor, Semiconductors Search and Free Datasheet PDF Download Site
Part Number :
Home  >>>  TDE1707 Datasheet

TDE1707

  

Datasheet PDF

Match, Like TDE1707
Start with TDE1707B* TDE1707F*
End *-TDE1707
Included *TDE1707B*

TDE1707FP_[POWER CONTROLLERS & MOTOR DRIVERS]

other part :L292_   L291_   L272_   L149_   L165_   L200_   L290_  

POWER CONTROLLERS & MOTOR DRIVERS

SINGLE CHIP MULTIPOWER

SOLENOID DRIVERS

DC MOTORS DRIVERS

UNIPOLAR STEPPER MOTORS DRIVERS

BIPOLAR STEPPER MOTORS DRIVERS

BRUSHLESS MOTORS DRIVERS

DEDICATED HARD DISK DRIVE

HIGH CURRENT SWITCHING REGULATORS

PWM CONTROLLERS

POWER TRANSISTOR DRIVER

POWER FACTOR CORRECTORS

MISCELLANEOUS

SMART POWER ACTUATORS

LINEAR REGULATOR SUPERVISOR

POWER DRIVERS

STMicroelectronics
ST-Microelectronics

View

TDE1707[INTELLIGENT POWER SWITCH]

other part :TDE1707FP  

DESCRIPTION
The TDE1707 is a 0.5A Integrated Power Switch with up to 48V Power supply capability.
Two output configurations are possible:
    - Load to Gnd. (High Side Mode)
    - Load to VS (Low side Mode)
   
■ 0.5A OUTPUT CURRENT
■ LOW SIDE OR HIGH SIDE SWITCH CONFIGURATION
■ 6V TO 48V SUPPLY VOLTAGE RANGE
■ OVERLOAD AND SHORT CIRCUIT PROTECTIONS
■ INTERNAL VOLTAGE CLAMPING
■ SUPPLY AND OUTPUT REVERSAL PROTECTION
■ THERMAL SHUTDOWN
■ GND AND VS OPEN WIRE PROTECTION
■ ADJUSTABLE DELAY AT SWITCH ON
■ INDICATOR STATUS LED DRIVER
■ +5V REGULATED AUX. VOLTAGE
   

STMicroelectronics
ST-Microelectronics

View

TDE1707FP[INTELLIGENT POWER SWITCH]

other part :TDE1707  

DESCRIPTION
The TDE1707 is a 0.5A Integrated Power Switch with up to 48V Power supply capability.
Two output configurations are possible:
    - Load to Gnd. (High Side Mode)
    - Load to VS (Low side Mode)
   
■ 0.5A OUTPUT CURRENT
■ LOW SIDE OR HIGH SIDE SWITCH CONFIGURATION
■ 6V TO 48V SUPPLY VOLTAGE RANGE
■ OVERLOAD AND SHORT CIRCUIT PROTECTIONS
■ INTERNAL VOLTAGE CLAMPING
■ SUPPLY AND OUTPUT REVERSAL PROTECTION
■ THERMAL SHUTDOWN
■ GND AND VS OPEN WIRE PROTECTION
■ ADJUSTABLE DELAY AT SWITCH ON
■ INDICATOR STATUS LED DRIVER
■ +5V REGULATED AUX. VOLTAGE
   

STMicroelectronics
ST-Microelectronics

View

TDE1707BFP[INTELLIGENT POWER SWITCH]

other part :TDE1707BFPT  

DESCRIPTION
The TDE1707BFP is a 0.5A Integrated Power Switch with up to 48V Power supply capability.
Two output configurations are possible:
- Load to Gnd. (High Side Mode)
- Load to VS (Low side Mode)

Especially dedicated to proximity detectors, its internal +5V supply can be used to supply external circuits (See also AN495/0692). A signal is internally generated to block the In signal, and prevent activation of the output switch, as long as an abnormal condition is detected. The power-on transition, as well as the chip overtemperature and the output overcurrent, concurr to the generation of such signal. A minimum delay of 25µs (Typ. value) is added to the trailing edge of such signal to ensure that a stable normal situation is present when the signal disappears. The delay (of the disapperance of the block signal; no delay at its on set) can be further increased connecting a capacitor between pin3 and ground. It can drive resistive or inductive loads.

■ 0.5A OUTPUT CURRENT
■ LOW SIDE OR HIGH SIDE SWITCH CONFIGURATION
■ 6V TO 48V SUPPLY VOLTAGE RANGE
■ OVERLOAD AND SHORT CIRCUIT PROTECTIONS
■ INTERNAL VOLTAGE CLAMPING
■ SUPPLY AND OUTPUT REVERSAL PROTECTION
■ THERMAL SHUTDOWN
■ GND AND VS OPEN WIRE PROTECTION
■ ADJUSTABLE DELAY AT SWITCH ON
■ INDICATOR STATUS LED DRIVER
■ +5V REGULATED AUX. VOLTAGE
■ HIGH BURST IMMUNITY

STMicroelectronics
ST-Microelectronics

View

TDE1707BFPT[INTELLIGENT POWER SWITCH]

other part :TDE1707BFP  

DESCRIPTION
The TDE1707BFP is a 0.5A Integrated Power Switch with up to 48V Power supply capability.
Two output configurations are possible:
- Load to Gnd. (High Side Mode)
- Load to VS (Low side Mode)

Especially dedicated to proximity detectors, its internal +5V supply can be used to supply external circuits (See also AN495/0692). A signal is internally generated to block the In signal, and prevent activation of the output switch, as long as an abnormal condition is detected. The power-on transition, as well as the chip overtemperature and the output overcurrent, concurr to the generation of such signal. A minimum delay of 25µs (Typ. value) is added to the trailing edge of such signal to ensure that a stable normal situation is present when the signal disappears. The delay (of the disapperance of the block signal; no delay at its on set) can be further increased connecting a capacitor between pin3 and ground. It can drive resistive or inductive loads.

■ 0.5A OUTPUT CURRENT
■ LOW SIDE OR HIGH SIDE SWITCH CONFIGURATION
■ 6V TO 48V SUPPLY VOLTAGE RANGE
■ OVERLOAD AND SHORT CIRCUIT PROTECTIONS
■ INTERNAL VOLTAGE CLAMPING
■ SUPPLY AND OUTPUT REVERSAL PROTECTION
■ THERMAL SHUTDOWN
■ GND AND VS OPEN WIRE PROTECTION
■ ADJUSTABLE DELAY AT SWITCH ON
■ INDICATOR STATUS LED DRIVER
■ +5V REGULATED AUX. VOLTAGE
■ HIGH BURST IMMUNITY

STMicroelectronics
ST-Microelectronics

View
1
 
Key Word
System  Voltage  Analog  Audio  Axial  Battery  Bipolar  Bridge  Camera  Chip  Clock  Color  Connector  Control  Controller  Converter  Counter  Crystal  Decoder  Digital 

@ 2014 - 2018  [ Home ] [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]