Qdatasheet_Logo    Integrated circuits, Transistor, Semiconductors Search and Free Datasheet PDF Download Site
Part Number :
Home  >>>  306C Datasheet

306C

  

Datasheet PDF

Match, Like N/A
Start with N/A
End *Z306C *6306C *F306C *0306C *3306C *C306C *U306C *E306C *1306C *X306C *G306C *M306C *2306C *B306C *P306C *4306C *5306C
Included *306C-* *306C/* *306CA* *306CD* *306CE* *306CJ* *306CK* *306CL* *306CM* *306CP* *306CS* *306CT* *306CU* *306CW* *306CX* *306C_*

SP306CT[RS-422/RS-423 Line Drivers/Receivers]

other part :SP306   SP306MF  

DESCRIPTION…
TheSP306 is a single chip device that offers both RS-422 and RS-423–type serial interfaces. The device can be programmed to provide two full–duplex channels of either RS-422 or RS-423 via two mode control pins. The SP306 also features a loopback function that can be activated in any operating mode. The SP306 is available in a 28–pin SOIC package for operation over the commercial temperature range.

■ Single chip serial transceiver supports RS-422 or RS-423 interfaces
■ Programmable Selection of Interface
■ Two Full–Duplex Channels of Either Interface
■ Software–Selectable Mode
■ Loopback for Self–Testing
■ Short–Circuit Protected
■ Surface Mount Packaging

 

Signal Processing Technologies
Sipex

View

DG306C/D[CMOS Analog Switchs]

other part :DG304   DG304A   DG304AA   DG304ABA   DG304ABK   DG304ABWE   DG304AC/D  


Maxim Integrated
MaximIC

View

8102306CA[Wide Bandwidth Quad JFET Input Operational Amplifier]

other part :LF147J-SMD   LF147J/883_05   LF147QML  

General Description
The LF147 is a low cost, high speed quad JFET input operational amplifier with an internally trimmed input offset voltage (BI-FET II™ technology). The device requires a low supply current and yet maintains a large gain bandwidth product and a fast slew rate. In addition, well matched high voltage JFET input devices provide very low input bias and offset currents. The LF147 is pin compatible with the standard LM148. This feature allows designers to immediately upgrade the overall performance of existing LF148 and LM124 designs.
The LF147 may be used in applications such as high speed integrators, fast D/A converters, sample-and-hold circuits and many other circuits requiring low input offset voltage, low input bias current, high input impedance, high slew rate and wide bandwidth. The device has low noise and offset voltage drift.

Features
■ Internally trimmed offset voltage: 5 mV max
■ Low input bias current: 50 pA Typ.
■ Low input noise current: 0.01 pA/√Hz Typ.
■ Wide gain bandwidth: 4 MHz Typ.
■ High slew rate: 13 V/µs Typ.
■ Low supply current: 7.2 mA Typ.
■ High input impedance: 10¹²Ω Typ.
■ Low total harmonic distortion:
   AV = 10, RL = 10KΩ, VO = 20VP-P
   BW = 20Hz – 20KHz ≤0.02% Typ.
■ Low 1/f noise corner: 50 Hz Typ.
■ Fast settling time to 0.01%: 2 µs Typ.

Texas Instruments
TI

View

SN74CBT3306CD[DUAL FET BUS SWITCH 5-V BUS SWITCH WITH -2 -V UNDERSHOOT PROTECTION]

other part :SN74CBT3306C   SN74CBT3306CDR   SN74CBT3306CPW   SN74CBT3306CPWR   SN74CBT3306CPWRE4   SN74CBT3306CPWRG4  

description/ordering information
The SN74CBT3306C is a high-speed TTL-compatible FET bus switch with low ON-state resistance (ron), allowing for minimal propagation delay. Active Undershoot-Protection Circuitry on the A and B ports of the SN74CBT3306C provides protection for undershoot up to −2 V by sensing an  undershoot event and ensuring that the switch remains in the proper OFF state.


● Undershoot Protection for Off-Isolation on A and B Ports Up To −2 V
● Bidirectional Data Flow, With Near-Zero Propagation Delay
● Low ON-State Resistance (ron) Characteristics (ron = 3 Ω Typical)
● Low Input/Output Capacitance Minimizes Loading and Signal Distortion (Cio(OFF) = 5 pF Typical)
● Data and Control Inputs Provide Undershoot Clamp Diodes
● Low Power Consumption (ICC = 3 µA Max)
● VCC Operating Range From 4 V to 5.5 V
● Data I/Os Support 0 to 5-V Signaling Levels (0.8-V, 1.2-V, 1.5-V, 1.8-V, 2.5-V, 3.3-V, 5-V)
● Control Inputs Can Be Driven by TTL or 5-V/3.3-V CMOS Outputs
● Ioff Supports Partial-Power-Down Mode Operation
● Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
● ESD Performance Tested Per JESD 22
  − 2000-V Human-Body Model (A114-B, Class II)
  − 1000-V Charged-Device Model (C101)
● Supports Both Digital and Analog Applications: USB Interface, Bus Isolation, Low-Distortion  Signal Gating

 

Texas Instruments
TI

View

DG306CK[CMOS Analog Switchs]

other part :DG304   DG304A   DG304AA   DG304ABA   DG304ABK   DG304ABWE   DG304AC/D  


Maxim Integrated
MaximIC

View

SZ306C[Surface Mount Silicon Zener Diodes]

other part :SZ3010   SZ3011   SZ3012   SZ3013   SZ3015   SZ3016   SZ3018  

VZ : 3.3 - 200 Volts
PD : 1.5 Watts

Features
◇ Complete Voltage Range 3.3 to 200 Volts
◇ High peak reverse power dissipation
◇ High reliability
◇ Low leakage current
◇ Pb / RoHS Free

 

Shenzhen Luguang Electronic Technology Co., Ltd
LUGUANG

View

SN74CBT3306CPWRG4[DUAL FET BUS SWITCH 5-V BUS SWITCH WITH -2 -V UNDERSHOOT PROTECTION]

other part :SN74CBT3306C   SN74CBT3306CD   SN74CBT3306CDR   SN74CBT3306CPW   SN74CBT3306CPWR   SN74CBT3306CPWRE4  

description/ordering information
The SN74CBT3306C is a high-speed TTL-compatible FET bus switch with low ON-state resistance (ron), allowing for minimal propagation delay. Active Undershoot-Protection Circuitry on the A and B ports of the SN74CBT3306C provides protection for undershoot up to −2 V by sensing an  undershoot event and ensuring that the switch remains in the proper OFF state.


● Undershoot Protection for Off-Isolation on A and B Ports Up To −2 V
● Bidirectional Data Flow, With Near-Zero Propagation Delay
● Low ON-State Resistance (ron) Characteristics (ron = 3 Ω Typical)
● Low Input/Output Capacitance Minimizes Loading and Signal Distortion (Cio(OFF) = 5 pF Typical)
● Data and Control Inputs Provide Undershoot Clamp Diodes
● Low Power Consumption (ICC = 3 µA Max)
● VCC Operating Range From 4 V to 5.5 V
● Data I/Os Support 0 to 5-V Signaling Levels (0.8-V, 1.2-V, 1.5-V, 1.8-V, 2.5-V, 3.3-V, 5-V)
● Control Inputs Can Be Driven by TTL or 5-V/3.3-V CMOS Outputs
● Ioff Supports Partial-Power-Down Mode Operation
● Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
● ESD Performance Tested Per JESD 22
  − 2000-V Human-Body Model (A114-B, Class II)
  − 1000-V Charged-Device Model (C101)
● Supports Both Digital and Analog Applications: USB Interface, Bus Isolation, Low-Distortion  Signal Gating

 

Texas Instruments
TI

View

DG306CWE[CMOS Analog Switchs]

other part :DG304   DG304A   DG304AA   DG304ABA   DG304ABK   DG304ABWE   DG304AC/D  


Maxim Integrated
MaximIC

View

M306C5ME-XXXSS[SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER with CLOSED CAPTION DECODER and ON-SCREEN DISPLAY CONTROLLER]

other part :M306C5EE-XXXSP   M306C5EE-XXXSS   M306C5ME-XXXSP   M306V5EE-XXXSP   M306V5EE-XXXSS   M306V5EESP   M306V5EESS  

DESCRIPTION
The M306V5ME-XXXSP and M306V5EESP are single-chip microcomputers using the high-performance silicon gate CMOS process using a M16C/60 Series CPU core and are packaged in a 64-pin plastic molded SDIP. These single-chip microcomputers operate using sophisticated instructions featuring a high level of instruction efficiency. With 1M bytes of address space, they are capable of executing instructions at high speed. They also feature a built-in OSD display function and data slicer, making them ideal for controlling TV with a closed caption decoder.
The features of the M306V5EESP are similar to those of the M306V5ME-XXXSP except that this chip has a built-in PROM which can be written electrically.

1.1 Features
• Memory size ........................................192K bytes
                                            5K bytes
                                            61K bytes
                                            2.2K bytes
• Shortest instruction execution time ......100 ns (f(XIN)=10 MHz)
• Power sourse voltage ..........................4.5 V to 5.5V
• Power consumption .............................250 mW
• Interrupts..............................................21 internal and 3 external interrupt sources, 4 software
                                                                             interrupt sources; 7 levels
• Multifunction 16-bit timer......................2 output timers + 1 input timer + 5 timers
• Serial I/O ..............................................4 units
                                            UART/clock synchronous: 2
                                            Multi-master I2C-BUS interface 0 (2 systems): 1
                                            Multi-master I2C-BUS interface 1 (1 systems): 1
• DMAC ..................................................2 channels (trigger: 23 sources)
• A-D converter.......................................8 bits ✕ 6 channels
• D-A converter.......................................8 bits ✕ 2 channels
• Data slicer ............................................1 circuit
• HSYNC counter .....................................1 circuit (2 systems)
• OSD function .......................................1 circuit
• Watchdog timer....................................1 circuit
• Programmable I/O ...............................46 lines
• Clock generating circuit .......................2 built-in clock generation circuits

Applications
  TV with a closed caption decoder

 

Mitsumi
Mitsumi

View

SN74CBT3306CPWR[DUAL FET BUS SWITCH 5-V BUS SWITCH WITH -2 -V UNDERSHOOT PROTECTION]

other part :SN74CBT3306C   SN74CBT3306CD   SN74CBT3306CDR   SN74CBT3306CPW   SN74CBT3306CPWRE4   SN74CBT3306CPWRG4  

description/ordering information
The SN74CBT3306C is a high-speed TTL-compatible FET bus switch with low ON-state resistance (ron), allowing for minimal propagation delay. Active Undershoot-Protection Circuitry on the A and B ports of the SN74CBT3306C provides protection for undershoot up to −2 V by sensing an  undershoot event and ensuring that the switch remains in the proper OFF state.


● Undershoot Protection for Off-Isolation on A and B Ports Up To −2 V
● Bidirectional Data Flow, With Near-Zero Propagation Delay
● Low ON-State Resistance (ron) Characteristics (ron = 3 Ω Typical)
● Low Input/Output Capacitance Minimizes Loading and Signal Distortion (Cio(OFF) = 5 pF Typical)
● Data and Control Inputs Provide Undershoot Clamp Diodes
● Low Power Consumption (ICC = 3 µA Max)
● VCC Operating Range From 4 V to 5.5 V
● Data I/Os Support 0 to 5-V Signaling Levels (0.8-V, 1.2-V, 1.5-V, 1.8-V, 2.5-V, 3.3-V, 5-V)
● Control Inputs Can Be Driven by TTL or 5-V/3.3-V CMOS Outputs
● Ioff Supports Partial-Power-Down Mode Operation
● Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
● ESD Performance Tested Per JESD 22
  − 2000-V Human-Body Model (A114-B, Class II)
  − 1000-V Charged-Device Model (C101)
● Supports Both Digital and Analog Applications: USB Interface, Bus Isolation, Low-Distortion  Signal Gating

 

Texas Instruments
TI

View
1 2 3 4 5 6


Key Word
System  Voltage  Analog  Audio  Axial  Battery  Bipolar  Bridge  Camera  Chip  Clock  Color  Connector  Control  Controller  Converter  Counter  Crystal  Decoder  Digital 

@ 2014 - 2018  [ Home ] [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]