Qdatasheet_Logo    Integrated circuits, Transistor, Semiconductors Search and Free Datasheet PDF Download Site
Part Number :
Home  >>>  CS630 Datasheet

CS6

  

Datasheet PDF

Match, Like CS60
Start with CS6-* CS60* CS61* CS62* CS63* CS64* CS66*
End *8CS6 *1CS6 *2CS6 *RCS6 *WCS6 *9CS6 *3CS6 *5CS6 *0CS6 *6CS6 *VCS6 *4CS6 *FCS6 *DCS6 *ACS6 *BCS6 *TCS6 *ICS6 *LCS6 *PCS6 *JCS6 *7CS6 *NCS6 *-CS6
Included *CS6-* *CS6/* *CS61* *CS62* *CS64* *CS66* *CS67* *CS68* *CS6A* *CS6D* *CS6G* *CS6P* *CS6T* *CS6V*

M95256-WCS6P/AB[256 Kbit serial SPI bus EEPROM with high-speed clock]

other part :M95256   M95256-CS3G/A   M95256-CS3G/AB   M95256-CS3G/K   M95256-CS3P/A   M95256-CS3P/AB   M95256-CS3P/K  

 Description
The M95256, M95256-W, M95256-R and M95256-DR are electrically erasable programmable memory (EEPROM) devices. They are accessed by a high speed SPI compatible bus. Their memory array is organized as 32768 × 8 bits. The M95256-DR also offers an additional page, named the Identification Page (64 bytes) which can be written and (later) permanently locked in Read-only mode. This Identification Page offers flexibility in the application board production line, as the Identification Page can be used to store unique identification parameters and/or parameters specific to the production line.

Features
■ Compatible with the Serial Peripheral Interface (SPI) bus
■ Memory array
– 256 Kb (32 Kbytes) of EEPROM
– Page size: 64 bytes
■ Additional Write lockable Page (Identification page)
■ Write
– Byte Write within 5 ms
– Page Write within 5 ms
■ Write Protect: quarter, half or whole memory array
■ High-speed clock frequency (20 MHz)
■ Single supply voltage: 1.8 V to 5.5 V
■ More than 1 Million Write cycles
■ More than 40-year data retention
■ Enhanced ESD Protection
■ Packages
–ECOPACK2® (RoHS compliant and Halogen-free)

STMicroelectronics
ST-Microelectronics

View

M24C32-RCS6GP[128 Kbit, 64 Kbit and 32 Kbit serial I²C bus EEPROM]

other part :M24128-BFCS3G   M24128-BFCS3P   M24C32WMW6T   M24C32WMW5T   M24C32WMW3T   M24C32WMW1T   M24128-BFCS3TG  

Description
The M24C32, M24C64 and M24128 devices are I2C-compatible electrically erasable
programmable memories (EEPROM). They are organized as 4096 × 8 bits, 8192 × 8 bits and 16384 × 8 bits, respectively.
I2C uses a two-wire serial interface, comprising a bi-directional data line and a clock line.
The devices carry a built-in 4-bit Device Type Identifier code (1010) in accordance with the
I2C bus definition.


Features
■ Two-wire I2C serial interface supports 400 kHz protocol
■ Single supply voltages (see Table 1 for root part numbers):
– 2.5 V to 5.5 V
– 1.8 V to 5.5 V
– 1.7 V to 5.5 V
■ Write Control input
■ Byte and Page Write
■ Random and Sequential Read modes
■ Self-timed programming cycle
■ Automatic address incrementing
■ Enhanced ESD/latch-up protection
■ More than 1 Million write cycles
■ More than 40-year data retention
■ Packages
– ECOPACK® (RoHS compliant)

STMicroelectronics
ST-Microelectronics

View

M24C32-WCS6TPA[128 Kbit, 64 Kbit and 32 Kbit serial I²C bus EEPROM]

other part :M24128-BFCS3G   M24128-BFCS3P   M24C32WMW6T   M24C32WMW5T   M24C32WMW3T   M24C32WMW1T   M24128-BFCS3TG  

Description
The M24C32, M24C64 and M24128 devices are I2C-compatible electrically erasable
programmable memories (EEPROM). They are organized as 4096 × 8 bits, 8192 × 8 bits and 16384 × 8 bits, respectively.
I2C uses a two-wire serial interface, comprising a bi-directional data line and a clock line.
The devices carry a built-in 4-bit Device Type Identifier code (1010) in accordance with the
I2C bus definition.


Features
■ Two-wire I2C serial interface supports 400 kHz protocol
■ Single supply voltages (see Table 1 for root part numbers):
– 2.5 V to 5.5 V
– 1.8 V to 5.5 V
– 1.7 V to 5.5 V
■ Write Control input
■ Byte and Page Write
■ Random and Sequential Read modes
■ Self-timed programming cycle
■ Automatic address incrementing
■ Enhanced ESD/latch-up protection
■ More than 1 Million write cycles
■ More than 40-year data retention
■ Packages
– ECOPACK® (RoHS compliant)

STMicroelectronics
ST-Microelectronics

View

M24C64-RCS6TA[128 Kbit, 64 Kbit and 32 Kbit serial I²C bus EEPROM]

other part :M24128-BFCS3G   M24128-BFCS3P   M24C32WMW6T   M24C32WMW5T   M24C32WMW3T   M24C32WMW1T   M24128-BFCS3TG  

Description
The M24C32, M24C64 and M24128 devices are I2C-compatible electrically erasable
programmable memories (EEPROM). They are organized as 4096 × 8 bits, 8192 × 8 bits and 16384 × 8 bits, respectively.
I2C uses a two-wire serial interface, comprising a bi-directional data line and a clock line.
The devices carry a built-in 4-bit Device Type Identifier code (1010) in accordance with the
I2C bus definition.


Features
■ Two-wire I2C serial interface supports 400 kHz protocol
■ Single supply voltages (see Table 1 for root part numbers):
– 2.5 V to 5.5 V
– 1.8 V to 5.5 V
– 1.7 V to 5.5 V
■ Write Control input
■ Byte and Page Write
■ Random and Sequential Read modes
■ Self-timed programming cycle
■ Automatic address incrementing
■ Enhanced ESD/latch-up protection
■ More than 1 Million write cycles
■ More than 40-year data retention
■ Packages
– ECOPACK® (RoHS compliant)

STMicroelectronics
ST-Microelectronics

View

M24128-BFCS6G[128 Kbit, 64 Kbit and 32 Kbit serial I²C bus EEPROM]

other part :M24128-BFCS3G   M24128-BFCS3P   M24C32WMW6T   M24C32WMW5T   M24C32WMW3T   M24C32WMW1T   M24128-BFCS3TG  

Description
The M24C32, M24C64 and M24128 devices are I2C-compatible electrically erasable
programmable memories (EEPROM). They are organized as 4096 × 8 bits, 8192 × 8 bits and 16384 × 8 bits, respectively.
I2C uses a two-wire serial interface, comprising a bi-directional data line and a clock line.
The devices carry a built-in 4-bit Device Type Identifier code (1010) in accordance with the
I2C bus definition.


Features
■ Two-wire I2C serial interface supports 400 kHz protocol
■ Single supply voltages (see Table 1 for root part numbers):
– 2.5 V to 5.5 V
– 1.8 V to 5.5 V
– 1.7 V to 5.5 V
■ Write Control input
■ Byte and Page Write
■ Random and Sequential Read modes
■ Self-timed programming cycle
■ Automatic address incrementing
■ Enhanced ESD/latch-up protection
■ More than 1 Million write cycles
■ More than 40-year data retention
■ Packages
– ECOPACK® (RoHS compliant)

STMicroelectronics
ST-Microelectronics

View

EX64CS64PP[ex Family FPGAs]

other part :EX128-FCS100   EX128-FCS100I   EX128-FCS100PP   EX128-FCS128   EX128-FCS128I   EX128-FCS128PP   EX128-FCS49  

General Description
The eX family of FPGAs is a low-cost solution for low-power, high-performance designs. The inherent low power attributes of the antifuse technology, coupled with an additional low static power mode, make these devices ideal for power-sensitive applications. Fabricated with an advanced 0.22µCMOS antifuse technology, these devices achieve high performance with no power penalty.

Features
• High-Performance, Low-Power Antifuse FPGA
• LP/Sleep Mode for Additional Power Savings
• Advanced Small-footprint Packages
• Hot-Swap Compliant I/Os
• Single-Chip Solution
• Nonvolatile
• Live on power up
• Power-Up/Down Friendly (No Sequencing Required for Supply Voltages)
• Configurable Weak-Resistor Pull-Up or Pull-Down for Tristated Outputs during Power Up
• Individual Output Slew Rate Control
• 2.5V, 3.3V, and 5.0V Mixed Voltage Operation with 5.0V Input Tolerance and 5.0V Drive Strength
• Software Design Support with Actel Designer Series and Libero Tools
• Up to 100% Resource Utilization with 100% Pin Locking
• Deterministic Timing
• Unique In-System Diagnostic and Verification Capability with Silicon Explorer II
• Boundary Scan Testing in Compliance with IEEE Standard 1149.1 (JTAG)
• Secure Programming Technology Prevents Reverse Engineering and Design Theft

Leading Edge Performance
•240 MHz System Performance
• 3.9ns Clock-to-Out (Pad-to-Pad)
• 350 MHz Internal Performance

Specifications
• 3,000 to 12,000 Available System Gates
• As Many as 512 Maximum Flip-Flops (Using CC Macros)
• 0.22µCMOS Process Technology
• Up to 132 User-Programmable I/O Pins

Unspecified
ETC1

View

M24128RCS6TP[128 Kbit, 64 Kbit and 32 Kbit serial I²C bus EEPROM]

other part :M24128-BFCS3G   M24128-BFCS3P   M24C32WMW6T   M24C32WMW5T   M24C32WMW3T   M24C32WMW1T   M24128-BFCS3TG  

Description
The M24C32, M24C64 and M24128 devices are I2C-compatible electrically erasable
programmable memories (EEPROM). They are organized as 4096 × 8 bits, 8192 × 8 bits and 16384 × 8 bits, respectively.
I2C uses a two-wire serial interface, comprising a bi-directional data line and a clock line.
The devices carry a built-in 4-bit Device Type Identifier code (1010) in accordance with the
I2C bus definition.


Features
■ Two-wire I2C serial interface supports 400 kHz protocol
■ Single supply voltages (see Table 1 for root part numbers):
– 2.5 V to 5.5 V
– 1.8 V to 5.5 V
– 1.7 V to 5.5 V
■ Write Control input
■ Byte and Page Write
■ Random and Sequential Read modes
■ Self-timed programming cycle
■ Automatic address incrementing
■ Enhanced ESD/latch-up protection
■ More than 1 Million write cycles
■ More than 40-year data retention
■ Packages
– ECOPACK® (RoHS compliant)

STMicroelectronics
ST-Microelectronics

View

M24C64FCS6PA[128 Kbit, 64 Kbit and 32 Kbit serial I²C bus EEPROM]

other part :M24128-BFCS3G   M24128-BFCS3P   M24C32WMW6T   M24C32WMW5T   M24C32WMW3T   M24C32WMW1T   M24128-BFCS3TG  

Description
The M24C32, M24C64 and M24128 devices are I2C-compatible electrically erasable
programmable memories (EEPROM). They are organized as 4096 × 8 bits, 8192 × 8 bits and 16384 × 8 bits, respectively.
I2C uses a two-wire serial interface, comprising a bi-directional data line and a clock line.
The devices carry a built-in 4-bit Device Type Identifier code (1010) in accordance with the
I2C bus definition.


Features
■ Two-wire I2C serial interface supports 400 kHz protocol
■ Single supply voltages (see Table 1 for root part numbers):
– 2.5 V to 5.5 V
– 1.8 V to 5.5 V
– 1.7 V to 5.5 V
■ Write Control input
■ Byte and Page Write
■ Random and Sequential Read modes
■ Self-timed programming cycle
■ Automatic address incrementing
■ Enhanced ESD/latch-up protection
■ More than 1 Million write cycles
■ More than 40-year data retention
■ Packages
– ECOPACK® (RoHS compliant)

STMicroelectronics
ST-Microelectronics

View

NM93CS66VM8[4096-Bit Serial CMOS EEPROM (MICROWIRE™ Synchronous Bus)]

other part :NM93C66   NM93C66E   NM93C66EM   NM93C66EM8   NM93C66EM8X   NM93C66EMT8   NM93C66EN  

General Description
NM93C66 is a 4096-bit CMOS non-volatile EEPROM organized as 256 x 16-bit array. This device features MICROWIRE interface which is a 4-wire serial bus with chipselect (CS), clock (SK), data input (DI) and data output (DO) signals. This interface is compat ible to many of standard Microcontrollers and Microprocessors. There are 7 instructions implemented on the NM93C66 for various Read, Write, Erase, and Write Enable/Disable operations. This device is fabricated using Fairchild Semiconductor floating-gate CMOS process for high reliability, high endurance and low power consumption.
“LZ” and “L” versions of NM93C66 offer very low standby current making them suitable for low power applications. This device is offered in both SO and TSSOP packages for small space consid erations.

Features
■ Wide VCC 2.7V - 5.5V
■ Typical active current of 200µA
   10µA standby current typical
   1µA standby current typical (L)
   0.1µA standby current typical (LZ)
■ No Erase instruction required before Write instruction
■ Self timed write cycle
■ Device status during programming cycles
■ 40 year data retention
■ Endurance: 1,000,000 data changes
■ Packages available: 8-pin SO, 8-pin DIP, 8-pin TSSOP

Fairchild Semiconductor
Fairchild

View

M24C32-FCS6TGA[128 Kbit, 64 Kbit and 32 Kbit serial I²C bus EEPROM]

other part :M24128-BFCS3G   M24128-BFCS3P   M24C32WMW6T   M24C32WMW5T   M24C32WMW3T   M24C32WMW1T   M24128-BFCS3TG  

Description
The M24C32, M24C64 and M24128 devices are I2C-compatible electrically erasable
programmable memories (EEPROM). They are organized as 4096 × 8 bits, 8192 × 8 bits and 16384 × 8 bits, respectively.
I2C uses a two-wire serial interface, comprising a bi-directional data line and a clock line.
The devices carry a built-in 4-bit Device Type Identifier code (1010) in accordance with the
I2C bus definition.


Features
■ Two-wire I2C serial interface supports 400 kHz protocol
■ Single supply voltages (see Table 1 for root part numbers):
– 2.5 V to 5.5 V
– 1.8 V to 5.5 V
– 1.7 V to 5.5 V
■ Write Control input
■ Byte and Page Write
■ Random and Sequential Read modes
■ Self-timed programming cycle
■ Automatic address incrementing
■ Enhanced ESD/latch-up protection
■ More than 1 Million write cycles
■ More than 40-year data retention
■ Packages
– ECOPACK® (RoHS compliant)

STMicroelectronics
ST-Microelectronics

View
1 2 3 4 5 6 7 8 9 10 Next


Key Word
System  Voltage  Analog  Audio  Axial  Battery  Bipolar  Bridge  Camera  Chip  Clock  Color  Connector  Control  Controller  Converter  Counter  Crystal  Decoder  Digital 

@ 2014 - 2018  [ Home ] [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]