Qdatasheet_Logo    Integrated circuits, Transistor, Semiconductors Search and Free Datasheet PDF Download Site
Part Number :
Home  >>>  ESL03 Datasheet

ESL

  

Datasheet PDF

Match, Like N/A
Start with N/A
End *-ESL *1ESL *2ESL *EESL *6ESL *9ESL *4ESL *0ESL *5ESL *RESL */ESL *8ESL
Included *ESL-* *ESLJ* *ESLK* *ESLV*

PIC16F1829T-ESL[14/20-Pin Flash Microcontrollers with nanoWatt XLP Technology]

other part :PIC16F1829T   PIC16F1825T   PIC16F1825-E   PIC16LF1825T   PIC16F1825-I   PIC16F1829-E   PIC16F1829-I  

High-Performance RISC CPU:
• Only 49 Instructions to Learn:
   - All single-cycle instructions except branches
• Operating Speed:
   - DC – 32 MHz oscillator/clock input
   - DC – 125 ns instruction cycle
• Up to 8 Kbytes Linear Program Memory Addressing
• Up to 1024 bytes Linear Data Memory Addressing
• Interrupt Capability with automatic context saving
• 16-Level Deep Hardware Stack with Optional Overflow/Underflow Reset
• Direct, Indirect and Relative Addressing modes:
   - Two full 16-bit File Select Registers (FSRs)
   - FSRs can read program and data memory

Flexible Oscillator Structure:
• Precision 32 MHz Internal Oscillator Block:
   - Factory calibrated to ± 1%, typical
   - Software selectable frequencies range of 31 kHz to 32 MHz
• 31 kHz Low-Power Internal Oscillator
• Four Crystal modes up to 32 MHz
• Three External Clock modes up to 32 MHz
• 4X Phase Lock Loop (PLL)
• Fail-Safe Clock Monitor:
   - Allows for safe shutdown if peripheral clock stops
• Two-Speed Oscillator Start-up
• Reference Clock Module:
   - Programmable clock output frequency and duty-cycle

Special Microcontroller Features:
• 1.8V-5.5V Operation – PIC16F1825/1829
• 1.8V-3.6V Operation – PIC16LF1825/1829
• Self-Programmable under Software Control
• Power-on Reset (POR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
• Programmable Brown-out Reset (BOR)
• Extended Watchdog Timer (WDT)
• In-Circuit Serial Programming™ (ICSP™) via two pins
• In-Circuit Debug (ICD) via Two Pins
• Enhanced Low-Voltage Programming (LVP)
• Operating Voltage Range:
   - 1.8V-5.5V (PIC16F1825/1829)
   - 1.8V-3.6V (PIC16LF1825/1829)
• Programmable Code Protection
• Power-Saving Sleep mode

Extreme Low-Power Management
PIC16LF1825/1829 with nanoWatt XLP:
• Sleep mode: 20 nA
• Watchdog Timer: 500 nA
• Timer1 Oscillator: 600 nA @ 32 kHz

Analog Features:
• Analog-to-Digital Converter (ADC) Module:
   - 10-bit resolution, up to 12 channels
   - Auto acquisition capability
   - Conversion available during Sleep
• Analog Comparator Module:
   - Two rail-to-rail analog comparators
   - Power mode control
   - Software controllable hysteresis
• Voltage Reference Module:
   - Fixed Voltage Reference (FVR) with 1.024V, 2.048V and 4.096V output levels
   - 5-bit rail-to-rail resistive DAC with positive and negative reference selection Peripheral Highlights:
• Up to 17 I/O Pins and 1 Input Only Pin:
   - High current sink/source 25 mA/25 mA
   - Programmable weak pull-ups
   - Programmable interrupt-on-change pins
• Timer0: 8-Bit Timer/Counter with 8-Bit Prescaler
• Enhanced Timer1:
   - 16-bit timer/counter with prescaler
   - External Gate Input mode
   - Dedicated, low-power 32 kHz oscillator driver
• Three Timer2-types: 8-Bit Timer/Counter with 8-Bit Period Register, Prescaler and Postscaler
• Two Capture, Compare, PWM (CCP) Modules
• Two Enhanced CCP (ECCP) Modules:
   - Software selectable time bases
   - Auto-shutdown and auto-restart
   - PWM steering
• Up to two Master Synchronous Serial Port (MSSP) with SPI and I2CTM with:
   - 7-bit address masking
   - SMBus/PMBusTM compatibility
• Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART) Module
• mTouch™ Sensing Oscillator Module:
   - Up to 12 input channels
• Data Signal Modulator Module:
   - Selectable modulator and carrier sources
• SR Latch:
   - Multiple Set/Reset input options
   - Emulates 555 Timer applications

 

Microchip Technology
Microchip

View

AM186ESLV-40KI[High Performance, 80C186-/80C188-Compatible and 80L186-/80L188-Compatible, 16-Bit Embedded Microcontrollers]

other part :AM186ES   AM188ES   AM186ESLV   AM188ESLV   AM186ES-20   AM186ES-40   AM186ES-25  

GENERAL DESCRIPTION
The Am186™ ES/ESLV and Am188™ ES/ESLV microcontrollers are an ideal upgrade for 80C186/188 and 80L186/188 microcontroller designs requiring 80C186/188 and 80L186/188 compatibility, increased performance, serial communications, and a direct bus interface.

DISTINCTIVE CHARACTERISTICS
■E86 family 80C186-/188- and 80L186-/188-compatible microcontrollers with enhanced bus interface
   — Lower system cost with higher performance
   — 3.3-V ±0.3-V operation(Am186ESLV and Am188ESLV microcontrollers)
■ High performance
   — 20-, 25-, 33-, and 40-MHz operating frequencies
   — Supports zero-wait-state operation at 25 MHz with 100-ns static memory (Am186ESLV and Am188ESLV microcontrollers) and 40 MHz with 70-ns static memory (Am186ES and Am188ES microcontrollers)
   — 1-Mbyte memory address space
   — 64-Kbyte I/O space
■ Enhanced features provide improved memory access and remove the requirement for a 2x clock input
   — Nonmultiplexed address bus
   — Processor operates at the clock input frequency
   — On the Am186ES/ESLV microcontroller, 8-bit or 16-bit memory and I/O static bus option
■ Enhanced integrated peripherals provide increased functionality, while reducing system cost
   — Thirty-two programmable I/O (PIO) pins
   — Two full-featured asynchronous serial ports allow full-duplex, 7-bit, 8-bit, or 9-bit data transfers
   — Serial port hardware handshaking with CTS, RTS, ENRX, and RTR selectable for each port
   — Multidrop 9-bit serial port protocol
   — Independent serial port baud rate generators
   — DMA to and from the serial ports
   — Watchdog timer can generate NMI or reset
   — A pulse-width demodulation option
   — A data strobe, true asynchronous bus interface option included for DEN
   — Pseudo static RAM (PSRAM) controller includes auto refresh capability
   — Reset configuration register
■ Familiar 80C186/80L186 peripherals
   — Two independent DMA channels
   — Programmable interrupt controller with up to eight external and eight internal interrupts
   — Three programmable 16-bit timers
   — Programmable memory and peripheral chip-select logic
   — Programmable wait state generator
   — Power-save clock divider
■ Software-compatible with the 80C186/80L186 and 80C188/80L188 microcontrollers with widely available native development tools, applications, and system software
■ A compatible evolution of the Am186EM and Am188EM microcontrollers
■ Available in the following packages:
   — 100-pin, thin quad flat pack (TQFP)
   — 100-pin, plastic quad flat pack (PQFP)

 

Advanced Micro Devices
AMD

View

PIC16LF1825-ESL[14/20-Pin Flash Microcontrollers with nanoWatt XLP Technology]

other part :PIC16F1829T   PIC16F1825T   PIC16F1825-E   PIC16LF1825T   PIC16F1825-I   PIC16F1829-E   PIC16F1829-I  

High-Performance RISC CPU:
• Only 49 Instructions to Learn:
   - All single-cycle instructions except branches
• Operating Speed:
   - DC – 32 MHz oscillator/clock input
   - DC – 125 ns instruction cycle
• Up to 8 Kbytes Linear Program Memory Addressing
• Up to 1024 bytes Linear Data Memory Addressing
• Interrupt Capability with automatic context saving
• 16-Level Deep Hardware Stack with Optional Overflow/Underflow Reset
• Direct, Indirect and Relative Addressing modes:
   - Two full 16-bit File Select Registers (FSRs)
   - FSRs can read program and data memory

Flexible Oscillator Structure:
• Precision 32 MHz Internal Oscillator Block:
   - Factory calibrated to ± 1%, typical
   - Software selectable frequencies range of 31 kHz to 32 MHz
• 31 kHz Low-Power Internal Oscillator
• Four Crystal modes up to 32 MHz
• Three External Clock modes up to 32 MHz
• 4X Phase Lock Loop (PLL)
• Fail-Safe Clock Monitor:
   - Allows for safe shutdown if peripheral clock stops
• Two-Speed Oscillator Start-up
• Reference Clock Module:
   - Programmable clock output frequency and duty-cycle

Special Microcontroller Features:
• 1.8V-5.5V Operation – PIC16F1825/1829
• 1.8V-3.6V Operation – PIC16LF1825/1829
• Self-Programmable under Software Control
• Power-on Reset (POR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
• Programmable Brown-out Reset (BOR)
• Extended Watchdog Timer (WDT)
• In-Circuit Serial Programming™ (ICSP™) via two pins
• In-Circuit Debug (ICD) via Two Pins
• Enhanced Low-Voltage Programming (LVP)
• Operating Voltage Range:
   - 1.8V-5.5V (PIC16F1825/1829)
   - 1.8V-3.6V (PIC16LF1825/1829)
• Programmable Code Protection
• Power-Saving Sleep mode

Extreme Low-Power Management
PIC16LF1825/1829 with nanoWatt XLP:
• Sleep mode: 20 nA
• Watchdog Timer: 500 nA
• Timer1 Oscillator: 600 nA @ 32 kHz

Analog Features:
• Analog-to-Digital Converter (ADC) Module:
   - 10-bit resolution, up to 12 channels
   - Auto acquisition capability
   - Conversion available during Sleep
• Analog Comparator Module:
   - Two rail-to-rail analog comparators
   - Power mode control
   - Software controllable hysteresis
• Voltage Reference Module:
   - Fixed Voltage Reference (FVR) with 1.024V, 2.048V and 4.096V output levels
   - 5-bit rail-to-rail resistive DAC with positive and negative reference selection Peripheral Highlights:
• Up to 17 I/O Pins and 1 Input Only Pin:
   - High current sink/source 25 mA/25 mA
   - Programmable weak pull-ups
   - Programmable interrupt-on-change pins
• Timer0: 8-Bit Timer/Counter with 8-Bit Prescaler
• Enhanced Timer1:
   - 16-bit timer/counter with prescaler
   - External Gate Input mode
   - Dedicated, low-power 32 kHz oscillator driver
• Three Timer2-types: 8-Bit Timer/Counter with 8-Bit Period Register, Prescaler and Postscaler
• Two Capture, Compare, PWM (CCP) Modules
• Two Enhanced CCP (ECCP) Modules:
   - Software selectable time bases
   - Auto-shutdown and auto-restart
   - PWM steering
• Up to two Master Synchronous Serial Port (MSSP) with SPI and I2CTM with:
   - 7-bit address masking
   - SMBus/PMBusTM compatibility
• Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART) Module
• mTouch™ Sensing Oscillator Module:
   - Up to 12 input channels
• Data Signal Modulator Module:
   - Selectable modulator and carrier sources
• SR Latch:
   - Multiple Set/Reset input options
   - Emulates 555 Timer applications

 

Microchip Technology
Microchip

View

AM188ESLV-40KI[High Performance, 80C186-/80C188-Compatible and 80L186-/80L188-Compatible, 16-Bit Embedded Microcontrollers]

other part :AM186ES   AM188ES   AM186ESLV   AM188ESLV   AM186ES-20   AM186ES-40   AM186ES-25  

GENERAL DESCRIPTION
The Am186™ ES/ESLV and Am188™ ES/ESLV microcontrollers are an ideal upgrade for 80C186/188 and 80L186/188 microcontroller designs requiring 80C186/188 and 80L186/188 compatibility, increased performance, serial communications, and a direct bus interface.

DISTINCTIVE CHARACTERISTICS
■E86 family 80C186-/188- and 80L186-/188-compatible microcontrollers with enhanced bus interface
   — Lower system cost with higher performance
   — 3.3-V ±0.3-V operation(Am186ESLV and Am188ESLV microcontrollers)
■ High performance
   — 20-, 25-, 33-, and 40-MHz operating frequencies
   — Supports zero-wait-state operation at 25 MHz with 100-ns static memory (Am186ESLV and Am188ESLV microcontrollers) and 40 MHz with 70-ns static memory (Am186ES and Am188ES microcontrollers)
   — 1-Mbyte memory address space
   — 64-Kbyte I/O space
■ Enhanced features provide improved memory access and remove the requirement for a 2x clock input
   — Nonmultiplexed address bus
   — Processor operates at the clock input frequency
   — On the Am186ES/ESLV microcontroller, 8-bit or 16-bit memory and I/O static bus option
■ Enhanced integrated peripherals provide increased functionality, while reducing system cost
   — Thirty-two programmable I/O (PIO) pins
   — Two full-featured asynchronous serial ports allow full-duplex, 7-bit, 8-bit, or 9-bit data transfers
   — Serial port hardware handshaking with CTS, RTS, ENRX, and RTR selectable for each port
   — Multidrop 9-bit serial port protocol
   — Independent serial port baud rate generators
   — DMA to and from the serial ports
   — Watchdog timer can generate NMI or reset
   — A pulse-width demodulation option
   — A data strobe, true asynchronous bus interface option included for DEN
   — Pseudo static RAM (PSRAM) controller includes auto refresh capability
   — Reset configuration register
■ Familiar 80C186/80L186 peripherals
   — Two independent DMA channels
   — Programmable interrupt controller with up to eight external and eight internal interrupts
   — Three programmable 16-bit timers
   — Programmable memory and peripheral chip-select logic
   — Programmable wait state generator
   — Power-save clock divider
■ Software-compatible with the 80C186/80L186 and 80C188/80L188 microcontrollers with widely available native development tools, applications, and system software
■ A compatible evolution of the Am186EM and Am188EM microcontrollers
■ Available in the following packages:
   — 100-pin, thin quad flat pack (TQFP)
   — 100-pin, plastic quad flat pack (PQFP)

 

Advanced Micro Devices
AMD

View

PIC16LF1825T-ESL[14/20-Pin Flash Microcontrollers with nanoWatt XLP Technology]

other part :PIC16F1829T   PIC16F1825T   PIC16F1825-E   PIC16LF1825T   PIC16F1825-I   PIC16F1829-E   PIC16F1829-I  

High-Performance RISC CPU:
• Only 49 Instructions to Learn:
   - All single-cycle instructions except branches
• Operating Speed:
   - DC – 32 MHz oscillator/clock input
   - DC – 125 ns instruction cycle
• Up to 8 Kbytes Linear Program Memory Addressing
• Up to 1024 bytes Linear Data Memory Addressing
• Interrupt Capability with automatic context saving
• 16-Level Deep Hardware Stack with Optional Overflow/Underflow Reset
• Direct, Indirect and Relative Addressing modes:
   - Two full 16-bit File Select Registers (FSRs)
   - FSRs can read program and data memory

Flexible Oscillator Structure:
• Precision 32 MHz Internal Oscillator Block:
   - Factory calibrated to ± 1%, typical
   - Software selectable frequencies range of 31 kHz to 32 MHz
• 31 kHz Low-Power Internal Oscillator
• Four Crystal modes up to 32 MHz
• Three External Clock modes up to 32 MHz
• 4X Phase Lock Loop (PLL)
• Fail-Safe Clock Monitor:
   - Allows for safe shutdown if peripheral clock stops
• Two-Speed Oscillator Start-up
• Reference Clock Module:
   - Programmable clock output frequency and duty-cycle

Special Microcontroller Features:
• 1.8V-5.5V Operation – PIC16F1825/1829
• 1.8V-3.6V Operation – PIC16LF1825/1829
• Self-Programmable under Software Control
• Power-on Reset (POR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
• Programmable Brown-out Reset (BOR)
• Extended Watchdog Timer (WDT)
• In-Circuit Serial Programming™ (ICSP™) via two pins
• In-Circuit Debug (ICD) via Two Pins
• Enhanced Low-Voltage Programming (LVP)
• Operating Voltage Range:
   - 1.8V-5.5V (PIC16F1825/1829)
   - 1.8V-3.6V (PIC16LF1825/1829)
• Programmable Code Protection
• Power-Saving Sleep mode

Extreme Low-Power Management
PIC16LF1825/1829 with nanoWatt XLP:
• Sleep mode: 20 nA
• Watchdog Timer: 500 nA
• Timer1 Oscillator: 600 nA @ 32 kHz

Analog Features:
• Analog-to-Digital Converter (ADC) Module:
   - 10-bit resolution, up to 12 channels
   - Auto acquisition capability
   - Conversion available during Sleep
• Analog Comparator Module:
   - Two rail-to-rail analog comparators
   - Power mode control
   - Software controllable hysteresis
• Voltage Reference Module:
   - Fixed Voltage Reference (FVR) with 1.024V, 2.048V and 4.096V output levels
   - 5-bit rail-to-rail resistive DAC with positive and negative reference selection Peripheral Highlights:
• Up to 17 I/O Pins and 1 Input Only Pin:
   - High current sink/source 25 mA/25 mA
   - Programmable weak pull-ups
   - Programmable interrupt-on-change pins
• Timer0: 8-Bit Timer/Counter with 8-Bit Prescaler
• Enhanced Timer1:
   - 16-bit timer/counter with prescaler
   - External Gate Input mode
   - Dedicated, low-power 32 kHz oscillator driver
• Three Timer2-types: 8-Bit Timer/Counter with 8-Bit Period Register, Prescaler and Postscaler
• Two Capture, Compare, PWM (CCP) Modules
• Two Enhanced CCP (ECCP) Modules:
   - Software selectable time bases
   - Auto-shutdown and auto-restart
   - PWM steering
• Up to two Master Synchronous Serial Port (MSSP) with SPI and I2CTM with:
   - 7-bit address masking
   - SMBus/PMBusTM compatibility
• Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART) Module
• mTouch™ Sensing Oscillator Module:
   - Up to 12 input channels
• Data Signal Modulator Module:
   - Selectable modulator and carrier sources
• SR Latch:
   - Multiple Set/Reset input options
   - Emulates 555 Timer applications

 

Microchip Technology
Microchip

View

AM186ESLV-40KI/W[High Performance, 80C186-/80C188-Compatible and 80L186-/80L188-Compatible, 16-Bit Embedded Microcontrollers]

other part :AM186ES   AM188ES   AM186ESLV   AM188ESLV   AM186ES-20   AM186ES-40   AM186ES-25  

GENERAL DESCRIPTION
The Am186™ ES/ESLV and Am188™ ES/ESLV microcontrollers are an ideal upgrade for 80C186/188 and 80L186/188 microcontroller designs requiring 80C186/188 and 80L186/188 compatibility, increased performance, serial communications, and a direct bus interface.

DISTINCTIVE CHARACTERISTICS
■E86 family 80C186-/188- and 80L186-/188-compatible microcontrollers with enhanced bus interface
   — Lower system cost with higher performance
   — 3.3-V ±0.3-V operation(Am186ESLV and Am188ESLV microcontrollers)
■ High performance
   — 20-, 25-, 33-, and 40-MHz operating frequencies
   — Supports zero-wait-state operation at 25 MHz with 100-ns static memory (Am186ESLV and Am188ESLV microcontrollers) and 40 MHz with 70-ns static memory (Am186ES and Am188ES microcontrollers)
   — 1-Mbyte memory address space
   — 64-Kbyte I/O space
■ Enhanced features provide improved memory access and remove the requirement for a 2x clock input
   — Nonmultiplexed address bus
   — Processor operates at the clock input frequency
   — On the Am186ES/ESLV microcontroller, 8-bit or 16-bit memory and I/O static bus option
■ Enhanced integrated peripherals provide increased functionality, while reducing system cost
   — Thirty-two programmable I/O (PIO) pins
   — Two full-featured asynchronous serial ports allow full-duplex, 7-bit, 8-bit, or 9-bit data transfers
   — Serial port hardware handshaking with CTS, RTS, ENRX, and RTR selectable for each port
   — Multidrop 9-bit serial port protocol
   — Independent serial port baud rate generators
   — DMA to and from the serial ports
   — Watchdog timer can generate NMI or reset
   — A pulse-width demodulation option
   — A data strobe, true asynchronous bus interface option included for DEN
   — Pseudo static RAM (PSRAM) controller includes auto refresh capability
   — Reset configuration register
■ Familiar 80C186/80L186 peripherals
   — Two independent DMA channels
   — Programmable interrupt controller with up to eight external and eight internal interrupts
   — Three programmable 16-bit timers
   — Programmable memory and peripheral chip-select logic
   — Programmable wait state generator
   — Power-save clock divider
■ Software-compatible with the 80C186/80L186 and 80C188/80L188 microcontrollers with widely available native development tools, applications, and system software
■ A compatible evolution of the Am186EM and Am188EM microcontrollers
■ Available in the following packages:
   — 100-pin, thin quad flat pack (TQFP)
   — 100-pin, plastic quad flat pack (PQFP)

 

Advanced Micro Devices
AMD

View

PIC16LF1829-ESL[14/20-Pin Flash Microcontrollers with nanoWatt XLP Technology]

other part :PIC16F1829T   PIC16F1825T   PIC16F1825-E   PIC16LF1825T   PIC16F1825-I   PIC16F1829-E   PIC16F1829-I  

High-Performance RISC CPU:
• Only 49 Instructions to Learn:
   - All single-cycle instructions except branches
• Operating Speed:
   - DC – 32 MHz oscillator/clock input
   - DC – 125 ns instruction cycle
• Up to 8 Kbytes Linear Program Memory Addressing
• Up to 1024 bytes Linear Data Memory Addressing
• Interrupt Capability with automatic context saving
• 16-Level Deep Hardware Stack with Optional Overflow/Underflow Reset
• Direct, Indirect and Relative Addressing modes:
   - Two full 16-bit File Select Registers (FSRs)
   - FSRs can read program and data memory

Flexible Oscillator Structure:
• Precision 32 MHz Internal Oscillator Block:
   - Factory calibrated to ± 1%, typical
   - Software selectable frequencies range of 31 kHz to 32 MHz
• 31 kHz Low-Power Internal Oscillator
• Four Crystal modes up to 32 MHz
• Three External Clock modes up to 32 MHz
• 4X Phase Lock Loop (PLL)
• Fail-Safe Clock Monitor:
   - Allows for safe shutdown if peripheral clock stops
• Two-Speed Oscillator Start-up
• Reference Clock Module:
   - Programmable clock output frequency and duty-cycle

Special Microcontroller Features:
• 1.8V-5.5V Operation – PIC16F1825/1829
• 1.8V-3.6V Operation – PIC16LF1825/1829
• Self-Programmable under Software Control
• Power-on Reset (POR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
• Programmable Brown-out Reset (BOR)
• Extended Watchdog Timer (WDT)
• In-Circuit Serial Programming™ (ICSP™) via two pins
• In-Circuit Debug (ICD) via Two Pins
• Enhanced Low-Voltage Programming (LVP)
• Operating Voltage Range:
   - 1.8V-5.5V (PIC16F1825/1829)
   - 1.8V-3.6V (PIC16LF1825/1829)
• Programmable Code Protection
• Power-Saving Sleep mode

Extreme Low-Power Management
PIC16LF1825/1829 with nanoWatt XLP:
• Sleep mode: 20 nA
• Watchdog Timer: 500 nA
• Timer1 Oscillator: 600 nA @ 32 kHz

Analog Features:
• Analog-to-Digital Converter (ADC) Module:
   - 10-bit resolution, up to 12 channels
   - Auto acquisition capability
   - Conversion available during Sleep
• Analog Comparator Module:
   - Two rail-to-rail analog comparators
   - Power mode control
   - Software controllable hysteresis
• Voltage Reference Module:
   - Fixed Voltage Reference (FVR) with 1.024V, 2.048V and 4.096V output levels
   - 5-bit rail-to-rail resistive DAC with positive and negative reference selection Peripheral Highlights:
• Up to 17 I/O Pins and 1 Input Only Pin:
   - High current sink/source 25 mA/25 mA
   - Programmable weak pull-ups
   - Programmable interrupt-on-change pins
• Timer0: 8-Bit Timer/Counter with 8-Bit Prescaler
• Enhanced Timer1:
   - 16-bit timer/counter with prescaler
   - External Gate Input mode
   - Dedicated, low-power 32 kHz oscillator driver
• Three Timer2-types: 8-Bit Timer/Counter with 8-Bit Period Register, Prescaler and Postscaler
• Two Capture, Compare, PWM (CCP) Modules
• Two Enhanced CCP (ECCP) Modules:
   - Software selectable time bases
   - Auto-shutdown and auto-restart
   - PWM steering
• Up to two Master Synchronous Serial Port (MSSP) with SPI and I2CTM with:
   - 7-bit address masking
   - SMBus/PMBusTM compatibility
• Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART) Module
• mTouch™ Sensing Oscillator Module:
   - Up to 12 input channels
• Data Signal Modulator Module:
   - Selectable modulator and carrier sources
• SR Latch:
   - Multiple Set/Reset input options
   - Emulates 555 Timer applications

 

Microchip Technology
Microchip

View

AM188ESLV-40KI/W[High Performance, 80C186-/80C188-Compatible and 80L186-/80L188-Compatible, 16-Bit Embedded Microcontrollers]

other part :AM186ES   AM188ES   AM186ESLV   AM188ESLV   AM186ES-20   AM186ES-40   AM186ES-25  

GENERAL DESCRIPTION
The Am186™ ES/ESLV and Am188™ ES/ESLV microcontrollers are an ideal upgrade for 80C186/188 and 80L186/188 microcontroller designs requiring 80C186/188 and 80L186/188 compatibility, increased performance, serial communications, and a direct bus interface.

DISTINCTIVE CHARACTERISTICS
■E86 family 80C186-/188- and 80L186-/188-compatible microcontrollers with enhanced bus interface
   — Lower system cost with higher performance
   — 3.3-V ±0.3-V operation(Am186ESLV and Am188ESLV microcontrollers)
■ High performance
   — 20-, 25-, 33-, and 40-MHz operating frequencies
   — Supports zero-wait-state operation at 25 MHz with 100-ns static memory (Am186ESLV and Am188ESLV microcontrollers) and 40 MHz with 70-ns static memory (Am186ES and Am188ES microcontrollers)
   — 1-Mbyte memory address space
   — 64-Kbyte I/O space
■ Enhanced features provide improved memory access and remove the requirement for a 2x clock input
   — Nonmultiplexed address bus
   — Processor operates at the clock input frequency
   — On the Am186ES/ESLV microcontroller, 8-bit or 16-bit memory and I/O static bus option
■ Enhanced integrated peripherals provide increased functionality, while reducing system cost
   — Thirty-two programmable I/O (PIO) pins
   — Two full-featured asynchronous serial ports allow full-duplex, 7-bit, 8-bit, or 9-bit data transfers
   — Serial port hardware handshaking with CTS, RTS, ENRX, and RTR selectable for each port
   — Multidrop 9-bit serial port protocol
   — Independent serial port baud rate generators
   — DMA to and from the serial ports
   — Watchdog timer can generate NMI or reset
   — A pulse-width demodulation option
   — A data strobe, true asynchronous bus interface option included for DEN
   — Pseudo static RAM (PSRAM) controller includes auto refresh capability
   — Reset configuration register
■ Familiar 80C186/80L186 peripherals
   — Two independent DMA channels
   — Programmable interrupt controller with up to eight external and eight internal interrupts
   — Three programmable 16-bit timers
   — Programmable memory and peripheral chip-select logic
   — Programmable wait state generator
   — Power-save clock divider
■ Software-compatible with the 80C186/80L186 and 80C188/80L188 microcontrollers with widely available native development tools, applications, and system software
■ A compatible evolution of the Am186EM and Am188EM microcontrollers
■ Available in the following packages:
   — 100-pin, thin quad flat pack (TQFP)
   — 100-pin, plastic quad flat pack (PQFP)

 

Advanced Micro Devices
AMD

View

PIC16LF1829T-ESL[14/20-Pin Flash Microcontrollers with nanoWatt XLP Technology]

other part :PIC16F1829T   PIC16F1825T   PIC16F1825-E   PIC16LF1825T   PIC16F1825-I   PIC16F1829-E   PIC16F1829-I  

High-Performance RISC CPU:
• Only 49 Instructions to Learn:
   - All single-cycle instructions except branches
• Operating Speed:
   - DC – 32 MHz oscillator/clock input
   - DC – 125 ns instruction cycle
• Up to 8 Kbytes Linear Program Memory Addressing
• Up to 1024 bytes Linear Data Memory Addressing
• Interrupt Capability with automatic context saving
• 16-Level Deep Hardware Stack with Optional Overflow/Underflow Reset
• Direct, Indirect and Relative Addressing modes:
   - Two full 16-bit File Select Registers (FSRs)
   - FSRs can read program and data memory

Flexible Oscillator Structure:
• Precision 32 MHz Internal Oscillator Block:
   - Factory calibrated to ± 1%, typical
   - Software selectable frequencies range of 31 kHz to 32 MHz
• 31 kHz Low-Power Internal Oscillator
• Four Crystal modes up to 32 MHz
• Three External Clock modes up to 32 MHz
• 4X Phase Lock Loop (PLL)
• Fail-Safe Clock Monitor:
   - Allows for safe shutdown if peripheral clock stops
• Two-Speed Oscillator Start-up
• Reference Clock Module:
   - Programmable clock output frequency and duty-cycle

Special Microcontroller Features:
• 1.8V-5.5V Operation – PIC16F1825/1829
• 1.8V-3.6V Operation – PIC16LF1825/1829
• Self-Programmable under Software Control
• Power-on Reset (POR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
• Programmable Brown-out Reset (BOR)
• Extended Watchdog Timer (WDT)
• In-Circuit Serial Programming™ (ICSP™) via two pins
• In-Circuit Debug (ICD) via Two Pins
• Enhanced Low-Voltage Programming (LVP)
• Operating Voltage Range:
   - 1.8V-5.5V (PIC16F1825/1829)
   - 1.8V-3.6V (PIC16LF1825/1829)
• Programmable Code Protection
• Power-Saving Sleep mode

Extreme Low-Power Management
PIC16LF1825/1829 with nanoWatt XLP:
• Sleep mode: 20 nA
• Watchdog Timer: 500 nA
• Timer1 Oscillator: 600 nA @ 32 kHz

Analog Features:
• Analog-to-Digital Converter (ADC) Module:
   - 10-bit resolution, up to 12 channels
   - Auto acquisition capability
   - Conversion available during Sleep
• Analog Comparator Module:
   - Two rail-to-rail analog comparators
   - Power mode control
   - Software controllable hysteresis
• Voltage Reference Module:
   - Fixed Voltage Reference (FVR) with 1.024V, 2.048V and 4.096V output levels
   - 5-bit rail-to-rail resistive DAC with positive and negative reference selection Peripheral Highlights:
• Up to 17 I/O Pins and 1 Input Only Pin:
   - High current sink/source 25 mA/25 mA
   - Programmable weak pull-ups
   - Programmable interrupt-on-change pins
• Timer0: 8-Bit Timer/Counter with 8-Bit Prescaler
• Enhanced Timer1:
   - 16-bit timer/counter with prescaler
   - External Gate Input mode
   - Dedicated, low-power 32 kHz oscillator driver
• Three Timer2-types: 8-Bit Timer/Counter with 8-Bit Period Register, Prescaler and Postscaler
• Two Capture, Compare, PWM (CCP) Modules
• Two Enhanced CCP (ECCP) Modules:
   - Software selectable time bases
   - Auto-shutdown and auto-restart
   - PWM steering
• Up to two Master Synchronous Serial Port (MSSP) with SPI and I2CTM with:
   - 7-bit address masking
   - SMBus/PMBusTM compatibility
• Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART) Module
• mTouch™ Sensing Oscillator Module:
   - Up to 12 input channels
• Data Signal Modulator Module:
   - Selectable modulator and carrier sources
• SR Latch:
   - Multiple Set/Reset input options
   - Emulates 555 Timer applications

 

Microchip Technology
Microchip

View

AM186ESLV-40VC[High Performance, 80C186-/80C188-Compatible and 80L186-/80L188-Compatible, 16-Bit Embedded Microcontrollers]

other part :AM186ES   AM188ES   AM186ESLV   AM188ESLV   AM186ES-20   AM186ES-40   AM186ES-25  

GENERAL DESCRIPTION
The Am186™ ES/ESLV and Am188™ ES/ESLV microcontrollers are an ideal upgrade for 80C186/188 and 80L186/188 microcontroller designs requiring 80C186/188 and 80L186/188 compatibility, increased performance, serial communications, and a direct bus interface.

DISTINCTIVE CHARACTERISTICS
■E86 family 80C186-/188- and 80L186-/188-compatible microcontrollers with enhanced bus interface
   — Lower system cost with higher performance
   — 3.3-V ±0.3-V operation(Am186ESLV and Am188ESLV microcontrollers)
■ High performance
   — 20-, 25-, 33-, and 40-MHz operating frequencies
   — Supports zero-wait-state operation at 25 MHz with 100-ns static memory (Am186ESLV and Am188ESLV microcontrollers) and 40 MHz with 70-ns static memory (Am186ES and Am188ES microcontrollers)
   — 1-Mbyte memory address space
   — 64-Kbyte I/O space
■ Enhanced features provide improved memory access and remove the requirement for a 2x clock input
   — Nonmultiplexed address bus
   — Processor operates at the clock input frequency
   — On the Am186ES/ESLV microcontroller, 8-bit or 16-bit memory and I/O static bus option
■ Enhanced integrated peripherals provide increased functionality, while reducing system cost
   — Thirty-two programmable I/O (PIO) pins
   — Two full-featured asynchronous serial ports allow full-duplex, 7-bit, 8-bit, or 9-bit data transfers
   — Serial port hardware handshaking with CTS, RTS, ENRX, and RTR selectable for each port
   — Multidrop 9-bit serial port protocol
   — Independent serial port baud rate generators
   — DMA to and from the serial ports
   — Watchdog timer can generate NMI or reset
   — A pulse-width demodulation option
   — A data strobe, true asynchronous bus interface option included for DEN
   — Pseudo static RAM (PSRAM) controller includes auto refresh capability
   — Reset configuration register
■ Familiar 80C186/80L186 peripherals
   — Two independent DMA channels
   — Programmable interrupt controller with up to eight external and eight internal interrupts
   — Three programmable 16-bit timers
   — Programmable memory and peripheral chip-select logic
   — Programmable wait state generator
   — Power-save clock divider
■ Software-compatible with the 80C186/80L186 and 80C188/80L188 microcontrollers with widely available native development tools, applications, and system software
■ A compatible evolution of the Am186EM and Am188EM microcontrollers
■ Available in the following packages:
   — 100-pin, thin quad flat pack (TQFP)
   — 100-pin, plastic quad flat pack (PQFP)

 

Advanced Micro Devices
AMD

View
1
 
Key Word
System  Voltage  Analog  Audio  Axial  Battery  Bipolar  Bridge  Camera  Chip  Clock  Color  Connector  Control  Controller  Converter  Counter  Crystal  Decoder  Digital 

@ 2014 - 2018  [ Home ] [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]