Qdatasheet_Logo    Integrated circuits, Transistor, Semiconductors Search and Free Datasheet PDF Download Site
Part Number :
Home  >>>  M636165-XXI Datasheet

M636

  

Datasheet PDF

Match, Like N/A
Start with N/A
End *8M636 *7M636 *LM636 *EM636 *SM636
Included *M636-* *M6368*

LM6361[High Speed Operational Amplifier]

other part :5962-8962101HA   5962-8962101PA   5962-8962101XA   LM6161   LM6161J   LM6161J/883   LM6161W  

General Description
The LM6161 family of high-speed amplifiers exhibits an excellent speed-power product in delivering 300 V/µs and 50 MHz unity gain stability with only 5 mA of supply current. Further power savings and application convenience are possible by taking advantage of the wide dynamic range in operating supply voltage which extends all the way down to +5V.
These amplifiers are built with National’s VIP™ (Vertically Integrated PNP) process which provides fast PNP transistors that are true complements to the already fast NPN devices. This advanced junction-isolated process delivers high speed performance without the need for complex and expensive dielectric isolation.
Features
■ High slew rate 300 V/µs
■ High unity gain freq 50 MHz
■ Low supply current 5 mA
■ Fast settling 120 ns to 0.1%
■ Low differential gain <0.1%
■ Low differential phase 0.1˚
■ Wide supply range 4.75V to 32V
■ Stable with unlimited capacitive load
■ Well behaved; easy to apply

Applications
■ Video amplifier
■ High-frequency filter
■ Wide-bandwidth signal conditioning
■ Radar
■ Sonar

National ->Texas Instruments
National-Semiconductor

View

EM636165[1Mega x 16 Synchronous DRAM (SDRAM)]

other part :EM636165BE   EM636165BE-10G   EM636165BE-55G   EM636165BE-5G   EM636165BE-6G   EM636165BE-7G   EM636165BE-7LG  

Overview
The EM636165 SDRAM is a high-speed CMOS synchronous DRAM containing 16 Mbits. It is internally configured as a dual 512K word x 16 DRAM with a synchronous interface (all signals are registered on the positive edge of the clock signal, CLK). Each of the 512K x 16 bit banks is organized as 2048 rows by 256 columns by 16 bits. Read and write accesses to the SDRAM are burst oriented; accesses start at a selected location and continue for a programmed number of locations in a programmed sequence. Accesses begin with the registration of a BankActivate command which is then followed by a Read or Write command.
The EM636165 provides for programmable Read or Write burst lengths of 1, 2, 4, 8, or full page, with a burst termination option. An auto precharge function may be enabled to provide a self-timed row precharge that is initiated at the end of the burst sequence. The refresh functions, either Auto or Self Refresh are easy to use. By having a programmable mode register, the system can choose the most suitable modes to maximize its performance. These devices are well suited for applications requiring high memory bandwidth and particularly well suited to high performance PC applications

Features
· Fast access time: 4.5/5/5/5.5/6.5/7.5 ns
· Fast clock rate: 200/183/166/143/125/100 MHz
· Self refresh mode: standard and low power
· Internal pipelined architecture
· 512K word x 16-bit x 2-bank
· Programmable Mode registers
   - CAS# Latency: 1, 2, or 3
   - Burst Length: 1, 2, 4, 8, or full page
   - Burst Type: interleaved or linear burst
   - Burst stop function
· Individual byte controlled by LDQM and UDQM
· Auto Refresh and Self Refresh
· 4096 refresh cycles/64ms
· CKE power down mode
· JEDEC standard +3.3V±0.3V power supply
· Interface: LVTTL
· 50-pin 400 mil plastic TSOP II package
· 60-ball, 6.4x10.1mm VFBGA package
· Lead Free Package available for both TSOP II and VFBGA

 

Etron Technology
Etron

View

EM636165-XXI[1Mega x 16 Synchronous DRAM (SDRAM)]

other part :EM636165TS-10I   EM636165TS-10IG   EM636165TS-6I   EM636165TS-6IG   EM636165TS-7I   EM636165TS-7IG   EM636165TS-8I  

Overview
The EM636165 SDRAM is a high-speed CMOS synchronous DRAM containing 16 Mbits. It is internally configured as a dual 512K word x 16 DRAM with a synchronous interface (all signals are registered on the positive edge of the clock signal, CLK). Each of the 512K x 16 bit banks is organized as 2048 rows by 256 columns by 16 bits. Read and write accesses to the SDRAM are burst oriented; accesses start at a selected location and continue for a programmed number of locations in a programmed sequence. Accesses begin with the registration of a BankActivate command which is then followed by a Read or Write command.
The EM636165 provides for programmable Read or Write burst lengths of 1, 2, 4, 8, or full page, with a burst termination option. An auto precharge function may be enabled to provide a self-timed row precharge that is initiated at the end of the burst sequence. The refresh functions, either Auto or Self Refresh are easy to use. By having a programmable mode register, the system can choose the most suitable modes to maximize its performance. These devices are well suited for applications requiring high memory bandwidth and particularly well suited to high performance PC applications

Features
· Fast access time: 5/5.5/6.5/7.5 ns
· Fast clock rate: 166/143/125/100 MHz
· Self refresh mode: standard and low power
· Internal pipelined architecture
· 512K word x 16-bit x 2-bank
· Programmable Mode registers
   - CAS# Latency: 1, 2, or 3
   - Burst Length: 1, 2, 4, 8, or full page
   - Burst Type: interleaved or linear burst
   - Burst stop function
· Individual byte controlled by LDQM and UDQM
· Auto Refresh and Self Refresh
· 4096 refresh cycles/64ms
· CKE power down mode
· Single +3.3V±0.3V power supply
· Interface: LVTTL
· 50-pin 400 mil plastic TSOP II package
· Lead Free Package available

 

Etron Technology
Etron

View

EM636165BE[1Mega x 16 Synchronous DRAM (SDRAM)]

other part :EM636165   EM636165BE-10G   EM636165BE-55G   EM636165BE-5G   EM636165BE-6G   EM636165BE-7G   EM636165BE-7LG  

Overview
The EM636165 SDRAM is a high-speed CMOS synchronous DRAM containing 16 Mbits. It is internally configured as a dual 512K word x 16 DRAM with a synchronous interface (all signals are registered on the positive edge of the clock signal, CLK). Each of the 512K x 16 bit banks is organized as 2048 rows by 256 columns by 16 bits. Read and write accesses to the SDRAM are burst oriented; accesses start at a selected location and continue for a programmed number of locations in a programmed sequence. Accesses begin with the registration of a BankActivate command which is then followed by a Read or Write command.
The EM636165 provides for programmable Read or Write burst lengths of 1, 2, 4, 8, or full page, with a burst termination option. An auto precharge function may be enabled to provide a self-timed row precharge that is initiated at the end of the burst sequence. The refresh functions, either Auto or Self Refresh are easy to use. By having a programmable mode register, the system can choose the most suitable modes to maximize its performance. These devices are well suited for applications requiring high memory bandwidth and particularly well suited to high performance PC applications

Features
· Fast access time: 4.5/5/5/5.5/6.5/7.5 ns
· Fast clock rate: 200/183/166/143/125/100 MHz
· Self refresh mode: standard and low power
· Internal pipelined architecture
· 512K word x 16-bit x 2-bank
· Programmable Mode registers
   - CAS# Latency: 1, 2, or 3
   - Burst Length: 1, 2, 4, 8, or full page
   - Burst Type: interleaved or linear burst
   - Burst stop function
· Individual byte controlled by LDQM and UDQM
· Auto Refresh and Self Refresh
· 4096 refresh cycles/64ms
· CKE power down mode
· JEDEC standard +3.3V±0.3V power supply
· Interface: LVTTL
· 50-pin 400 mil plastic TSOP II package
· 60-ball, 6.4x10.1mm VFBGA package
· Lead Free Package available for both TSOP II and VFBGA

 

Etron Technology
Etron

View

EM636165BE-10G[1Mega x 16 Synchronous DRAM (SDRAM)]

other part :EM636165   EM636165BE   EM636165BE-55G   EM636165BE-5G   EM636165BE-6G   EM636165BE-7G   EM636165BE-7LG  

Overview
The EM636165 SDRAM is a high-speed CMOS synchronous DRAM containing 16 Mbits. It is internally configured as a dual 512K word x 16 DRAM with a synchronous interface (all signals are registered on the positive edge of the clock signal, CLK). Each of the 512K x 16 bit banks is organized as 2048 rows by 256 columns by 16 bits. Read and write accesses to the SDRAM are burst oriented; accesses start at a selected location and continue for a programmed number of locations in a programmed sequence. Accesses begin with the registration of a BankActivate command which is then followed by a Read or Write command.
The EM636165 provides for programmable Read or Write burst lengths of 1, 2, 4, 8, or full page, with a burst termination option. An auto precharge function may be enabled to provide a self-timed row precharge that is initiated at the end of the burst sequence. The refresh functions, either Auto or Self Refresh are easy to use. By having a programmable mode register, the system can choose the most suitable modes to maximize its performance. These devices are well suited for applications requiring high memory bandwidth and particularly well suited to high performance PC applications

Features
· Fast access time: 4.5/5/5/5.5/6.5/7.5 ns
· Fast clock rate: 200/183/166/143/125/100 MHz
· Self refresh mode: standard and low power
· Internal pipelined architecture
· 512K word x 16-bit x 2-bank
· Programmable Mode registers
   - CAS# Latency: 1, 2, or 3
   - Burst Length: 1, 2, 4, 8, or full page
   - Burst Type: interleaved or linear burst
   - Burst stop function
· Individual byte controlled by LDQM and UDQM
· Auto Refresh and Self Refresh
· 4096 refresh cycles/64ms
· CKE power down mode
· JEDEC standard +3.3V±0.3V power supply
· Interface: LVTTL
· 50-pin 400 mil plastic TSOP II package
· 60-ball, 6.4x10.1mm VFBGA package
· Lead Free Package available for both TSOP II and VFBGA

 

Etron Technology
Etron

View

EM636165BE-55G[1Mega x 16 Synchronous DRAM (SDRAM)]

other part :EM636165   EM636165BE   EM636165BE-10G   EM636165BE-5G   EM636165BE-6G   EM636165BE-7G   EM636165BE-7LG  

Overview
The EM636165 SDRAM is a high-speed CMOS synchronous DRAM containing 16 Mbits. It is internally configured as a dual 512K word x 16 DRAM with a synchronous interface (all signals are registered on the positive edge of the clock signal, CLK). Each of the 512K x 16 bit banks is organized as 2048 rows by 256 columns by 16 bits. Read and write accesses to the SDRAM are burst oriented; accesses start at a selected location and continue for a programmed number of locations in a programmed sequence. Accesses begin with the registration of a BankActivate command which is then followed by a Read or Write command.
The EM636165 provides for programmable Read or Write burst lengths of 1, 2, 4, 8, or full page, with a burst termination option. An auto precharge function may be enabled to provide a self-timed row precharge that is initiated at the end of the burst sequence. The refresh functions, either Auto or Self Refresh are easy to use. By having a programmable mode register, the system can choose the most suitable modes to maximize its performance. These devices are well suited for applications requiring high memory bandwidth and particularly well suited to high performance PC applications

Features
· Fast access time: 4.5/5/5/5.5/6.5/7.5 ns
· Fast clock rate: 200/183/166/143/125/100 MHz
· Self refresh mode: standard and low power
· Internal pipelined architecture
· 512K word x 16-bit x 2-bank
· Programmable Mode registers
   - CAS# Latency: 1, 2, or 3
   - Burst Length: 1, 2, 4, 8, or full page
   - Burst Type: interleaved or linear burst
   - Burst stop function
· Individual byte controlled by LDQM and UDQM
· Auto Refresh and Self Refresh
· 4096 refresh cycles/64ms
· CKE power down mode
· JEDEC standard +3.3V±0.3V power supply
· Interface: LVTTL
· 50-pin 400 mil plastic TSOP II package
· 60-ball, 6.4x10.1mm VFBGA package
· Lead Free Package available for both TSOP II and VFBGA

 

Etron Technology
Etron

View

EM636165BE-5G[1Mega x 16 Synchronous DRAM (SDRAM)]

other part :EM636165   EM636165BE   EM636165BE-10G   EM636165BE-55G   EM636165BE-6G   EM636165BE-7G   EM636165BE-7LG  

Overview
The EM636165 SDRAM is a high-speed CMOS synchronous DRAM containing 16 Mbits. It is internally configured as a dual 512K word x 16 DRAM with a synchronous interface (all signals are registered on the positive edge of the clock signal, CLK). Each of the 512K x 16 bit banks is organized as 2048 rows by 256 columns by 16 bits. Read and write accesses to the SDRAM are burst oriented; accesses start at a selected location and continue for a programmed number of locations in a programmed sequence. Accesses begin with the registration of a BankActivate command which is then followed by a Read or Write command.
The EM636165 provides for programmable Read or Write burst lengths of 1, 2, 4, 8, or full page, with a burst termination option. An auto precharge function may be enabled to provide a self-timed row precharge that is initiated at the end of the burst sequence. The refresh functions, either Auto or Self Refresh are easy to use. By having a programmable mode register, the system can choose the most suitable modes to maximize its performance. These devices are well suited for applications requiring high memory bandwidth and particularly well suited to high performance PC applications

Features
· Fast access time: 4.5/5/5/5.5/6.5/7.5 ns
· Fast clock rate: 200/183/166/143/125/100 MHz
· Self refresh mode: standard and low power
· Internal pipelined architecture
· 512K word x 16-bit x 2-bank
· Programmable Mode registers
   - CAS# Latency: 1, 2, or 3
   - Burst Length: 1, 2, 4, 8, or full page
   - Burst Type: interleaved or linear burst
   - Burst stop function
· Individual byte controlled by LDQM and UDQM
· Auto Refresh and Self Refresh
· 4096 refresh cycles/64ms
· CKE power down mode
· JEDEC standard +3.3V±0.3V power supply
· Interface: LVTTL
· 50-pin 400 mil plastic TSOP II package
· 60-ball, 6.4x10.1mm VFBGA package
· Lead Free Package available for both TSOP II and VFBGA

 

Etron Technology
Etron

View

EM636165BE-6G[1Mega x 16 Synchronous DRAM (SDRAM)]

other part :EM636165   EM636165BE   EM636165BE-10G   EM636165BE-55G   EM636165BE-5G   EM636165BE-7G   EM636165BE-7LG  

Overview
The EM636165 SDRAM is a high-speed CMOS synchronous DRAM containing 16 Mbits. It is internally configured as a dual 512K word x 16 DRAM with a synchronous interface (all signals are registered on the positive edge of the clock signal, CLK). Each of the 512K x 16 bit banks is organized as 2048 rows by 256 columns by 16 bits. Read and write accesses to the SDRAM are burst oriented; accesses start at a selected location and continue for a programmed number of locations in a programmed sequence. Accesses begin with the registration of a BankActivate command which is then followed by a Read or Write command.
The EM636165 provides for programmable Read or Write burst lengths of 1, 2, 4, 8, or full page, with a burst termination option. An auto precharge function may be enabled to provide a self-timed row precharge that is initiated at the end of the burst sequence. The refresh functions, either Auto or Self Refresh are easy to use. By having a programmable mode register, the system can choose the most suitable modes to maximize its performance. These devices are well suited for applications requiring high memory bandwidth and particularly well suited to high performance PC applications

Features
· Fast access time: 4.5/5/5/5.5/6.5/7.5 ns
· Fast clock rate: 200/183/166/143/125/100 MHz
· Self refresh mode: standard and low power
· Internal pipelined architecture
· 512K word x 16-bit x 2-bank
· Programmable Mode registers
   - CAS# Latency: 1, 2, or 3
   - Burst Length: 1, 2, 4, 8, or full page
   - Burst Type: interleaved or linear burst
   - Burst stop function
· Individual byte controlled by LDQM and UDQM
· Auto Refresh and Self Refresh
· 4096 refresh cycles/64ms
· CKE power down mode
· JEDEC standard +3.3V±0.3V power supply
· Interface: LVTTL
· 50-pin 400 mil plastic TSOP II package
· 60-ball, 6.4x10.1mm VFBGA package
· Lead Free Package available for both TSOP II and VFBGA

 

Etron Technology
Etron

View

EM636165BE-7G[1Mega x 16 Synchronous DRAM (SDRAM)]

other part :EM636165   EM636165BE   EM636165BE-10G   EM636165BE-55G   EM636165BE-5G   EM636165BE-6G   EM636165BE-7LG  

Overview
The EM636165 SDRAM is a high-speed CMOS synchronous DRAM containing 16 Mbits. It is internally configured as a dual 512K word x 16 DRAM with a synchronous interface (all signals are registered on the positive edge of the clock signal, CLK). Each of the 512K x 16 bit banks is organized as 2048 rows by 256 columns by 16 bits. Read and write accesses to the SDRAM are burst oriented; accesses start at a selected location and continue for a programmed number of locations in a programmed sequence. Accesses begin with the registration of a BankActivate command which is then followed by a Read or Write command.
The EM636165 provides for programmable Read or Write burst lengths of 1, 2, 4, 8, or full page, with a burst termination option. An auto precharge function may be enabled to provide a self-timed row precharge that is initiated at the end of the burst sequence. The refresh functions, either Auto or Self Refresh are easy to use. By having a programmable mode register, the system can choose the most suitable modes to maximize its performance. These devices are well suited for applications requiring high memory bandwidth and particularly well suited to high performance PC applications

Features
· Fast access time: 4.5/5/5/5.5/6.5/7.5 ns
· Fast clock rate: 200/183/166/143/125/100 MHz
· Self refresh mode: standard and low power
· Internal pipelined architecture
· 512K word x 16-bit x 2-bank
· Programmable Mode registers
   - CAS# Latency: 1, 2, or 3
   - Burst Length: 1, 2, 4, 8, or full page
   - Burst Type: interleaved or linear burst
   - Burst stop function
· Individual byte controlled by LDQM and UDQM
· Auto Refresh and Self Refresh
· 4096 refresh cycles/64ms
· CKE power down mode
· JEDEC standard +3.3V±0.3V power supply
· Interface: LVTTL
· 50-pin 400 mil plastic TSOP II package
· 60-ball, 6.4x10.1mm VFBGA package
· Lead Free Package available for both TSOP II and VFBGA

 

Etron Technology
Etron

View

EM636165BE-7LG[1Mega x 16 Synchronous DRAM (SDRAM)]

other part :EM636165   EM636165BE   EM636165BE-10G   EM636165BE-55G   EM636165BE-5G   EM636165BE-6G   EM636165BE-7G  

Overview
The EM636165 SDRAM is a high-speed CMOS synchronous DRAM containing 16 Mbits. It is internally configured as a dual 512K word x 16 DRAM with a synchronous interface (all signals are registered on the positive edge of the clock signal, CLK). Each of the 512K x 16 bit banks is organized as 2048 rows by 256 columns by 16 bits. Read and write accesses to the SDRAM are burst oriented; accesses start at a selected location and continue for a programmed number of locations in a programmed sequence. Accesses begin with the registration of a BankActivate command which is then followed by a Read or Write command.
The EM636165 provides for programmable Read or Write burst lengths of 1, 2, 4, 8, or full page, with a burst termination option. An auto precharge function may be enabled to provide a self-timed row precharge that is initiated at the end of the burst sequence. The refresh functions, either Auto or Self Refresh are easy to use. By having a programmable mode register, the system can choose the most suitable modes to maximize its performance. These devices are well suited for applications requiring high memory bandwidth and particularly well suited to high performance PC applications

Features
· Fast access time: 4.5/5/5/5.5/6.5/7.5 ns
· Fast clock rate: 200/183/166/143/125/100 MHz
· Self refresh mode: standard and low power
· Internal pipelined architecture
· 512K word x 16-bit x 2-bank
· Programmable Mode registers
   - CAS# Latency: 1, 2, or 3
   - Burst Length: 1, 2, 4, 8, or full page
   - Burst Type: interleaved or linear burst
   - Burst stop function
· Individual byte controlled by LDQM and UDQM
· Auto Refresh and Self Refresh
· 4096 refresh cycles/64ms
· CKE power down mode
· JEDEC standard +3.3V±0.3V power supply
· Interface: LVTTL
· 50-pin 400 mil plastic TSOP II package
· 60-ball, 6.4x10.1mm VFBGA package
· Lead Free Package available for both TSOP II and VFBGA

 

Etron Technology
Etron

View
1


Key Word
System  Voltage  Analog  Audio  Axial  Battery  Bipolar  Bridge  Camera  Chip  Clock  Color  Connector  Control  Controller  Converter  Counter  Crystal  Decoder  Digital 

@ 2014 - 2018  [ Home ] [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]