Qdatasheet_Logo    Integrated circuits, Transistor, Semiconductors Search and Free Datasheet PDF Download Site
Part Number :
Home  >>>  SD83/16 Datasheet

SD8

  

Datasheet PDF

Match, Like N/A
Start with SD80* SD81* SD82* SD83* SD84* SD85* SD86* SD88* SD89*
End *LSD8 *MSD8 *RSD8 *SSD8 *TSD8 *VSD8 *WSD8 *YSD8 *ZSD8 *ESD8 *OSD8 *PSD8 *2SD8 *FSD8 *5SD8 *7SD8 *6SD8 *USD8 *CSD8 *HSD8 *KSD8 *XSD8
Included *SD8-* *SD8.* *SD80* *SD81* *SD82* *SD85* *SD87* *SD88*

14KESD8.5C[AXIAL-LEAD TVS]

other part :14KESD10   14KESD100   14KESD100A   14KESD100C   14KESD100CA   14KESD10A   14KESD10C  

DESCRIPTION
These small axial-leaded TVS devices feature the ability to clamp dangerous high voltage, short-term transients such as produced by directed or radiated electrostatic discharge phenomena before entering sensitive component regions of a circuit design. They are small economical transient voltage suppressors targeted primarily for short-term transients below a few microseconds while still achieving significant peak-pulse-power capability as illustrated in Figure #1.

FEATURES
• Excellent protection in clamping direct ESD level transients in excess of 40,000 V per MIL-STD-750, Method 1020 (approx. 150 ns exponential wave)
• Absorbs ESD level transients* of 14,000 Watts per MIL-STD-750, Method 1020 (approximately 150 ns exponential wave, or one microsecond transients up to 4000 watts. See Figure #1 and #2 for overall transient Peak Pulse Power.
• Clamps Transients in less than 100 picoseconds
• Working Stand-off Voltage range of 5V to 170V
• Hermetic DO-41 Package. Also available in surface mount DO-213AB MELF package (see separate data sheet)

MAXIMUM RATINGS
• 4000 Watts for One Microsecond Square Wave or 14,000 watts per ESD Wave form of MIL-STD-750, method 1020.
• See Surge Rating curve in Figures #1 and 2.
• Operating and storage temperature –65oC to 175oC
• THERMAL RESISTANCE: Less than 83oC/Watt junction to lead at 0.375 inches from body.
• DC power dissipation 1500 mW at TL = 75oC at 3/8 inch (10 mm) lead length from body.
• Derate at 22.8 W/oC above 25oC for PPP (1µs) and at 15 mW/oC above 75oC for dc power.
• Forward Surge Current 500 amps for 1µs at TL = 25oC (rise time > 100 ns).

Microsemi Corporation
Microsemi

View

PSD801F1-B-90U[Configurable Memory System on a Chip for 8-Bit Microcontrollers]

other part :PSD4133F-12B81   PSD4133F-12B81I   PSD4133F-12J   PSD4133F-12JI   PSD4133F-12M   PSD4133F-12MI   PSD4133F-12U  

Introduction
The PSD8XX series of Programmable Microcontroller (MCU) Peripherals brings In-System-Programmability (ISP) to Flash memory and programmable logic. The result is a simple and flexible solution for embedded designs. PSD8XX devices combine many of the peripheral functions found in MCU based applications:
  • 4 Mbit of Flash memory
  • A secondary Flash memory for boot or data
  • Over 3,000 gates of Flash programmable logic
  • 64 Kbit SRAM
  • Reconfigurable I/O ports
  • Programmable power management.

FEATURES SUMMARY
■ 5 V±10% Single Supply Voltage:
■ Up to 4 Mbit of Primary Flash Memory (8 uniform sectors)
■ 256Kbit Secondary Flash Memory (4 uniform sectors)
■ Up to 64 Kbit SRAM
■ Over 3,000 Gates of PLD: DPLD and CPLD
■ 52 Reconfigurable I/O ports
■ Enhanced JTAG Serial Port
■ Programmable power management
■ High Endurance:
   – 100,000 Erase/Write Cycles of Flash Memory
   – 1,000 Erase/Write Cycles of PLD

 

STMicroelectronics
ST-Microelectronics

View

PSD801F1V-B-12U[Configurable Memory System on a Chip for 8-Bit Microcontrollers]

other part :PSD4133F-12B81   PSD4133F-12B81I   PSD4133F-12J   PSD4133F-12JI   PSD4133F-12M   PSD4133F-12MI   PSD4133F-12U  

Introduction
The PSD8XX series of Programmable Microcontroller (MCU) Peripherals brings In-System-Programmability (ISP) to Flash memory and programmable logic. The result is a simple and flexible solution for embedded designs. PSD8XX devices combine many of the peripheral functions found in MCU based applications:
  • 4 Mbit of Flash memory
  • A secondary Flash memory for boot or data
  • Over 3,000 gates of Flash programmable logic
  • 64 Kbit SRAM
  • Reconfigurable I/O ports
  • Programmable power management.

FEATURES SUMMARY
■ 5 V±10% Single Supply Voltage:
■ Up to 4 Mbit of Primary Flash Memory (8 uniform sectors)
■ 256Kbit Secondary Flash Memory (4 uniform sectors)
■ Up to 64 Kbit SRAM
■ Over 3,000 Gates of PLD: DPLD and CPLD
■ 52 Reconfigurable I/O ports
■ Enhanced JTAG Serial Port
■ Programmable power management
■ High Endurance:
   – 100,000 Erase/Write Cycles of Flash Memory
   – 1,000 Erase/Write Cycles of PLD

 

STMicroelectronics
ST-Microelectronics

View

PSD801F2-A-15U[Configurable Memory System on a Chip for 8-Bit Microcontrollers]

other part :PSD4133F-12B81   PSD4133F-12B81I   PSD4133F-12J   PSD4133F-12JI   PSD4133F-12M   PSD4133F-12MI   PSD4133F-12U  

Introduction
The PSD8XX series of Programmable Microcontroller (MCU) Peripherals brings In-System-Programmability (ISP) to Flash memory and programmable logic. The result is a simple and flexible solution for embedded designs. PSD8XX devices combine many of the peripheral functions found in MCU based applications:
  • 4 Mbit of Flash memory
  • A secondary Flash memory for boot or data
  • Over 3,000 gates of Flash programmable logic
  • 64 Kbit SRAM
  • Reconfigurable I/O ports
  • Programmable power management.

FEATURES SUMMARY
■ 5 V±10% Single Supply Voltage:
■ Up to 4 Mbit of Primary Flash Memory (8 uniform sectors)
■ 256Kbit Secondary Flash Memory (4 uniform sectors)
■ Up to 64 Kbit SRAM
■ Over 3,000 Gates of PLD: DPLD and CPLD
■ 52 Reconfigurable I/O ports
■ Enhanced JTAG Serial Port
■ Programmable power management
■ High Endurance:
   – 100,000 Erase/Write Cycles of Flash Memory
   – 1,000 Erase/Write Cycles of PLD

 

STMicroelectronics
ST-Microelectronics

View

PSD801F2V-20U[Configurable Memory System on a Chip for 8-Bit Microcontrollers]

other part :PSD4133F-12B81   PSD4133F-12B81I   PSD4133F-12J   PSD4133F-12JI   PSD4133F-12M   PSD4133F-12MI   PSD4133F-12U  

Introduction
The PSD8XX series of Programmable Microcontroller (MCU) Peripherals brings In-System-Programmability (ISP) to Flash memory and programmable logic. The result is a simple and flexible solution for embedded designs. PSD8XX devices combine many of the peripheral functions found in MCU based applications:
  • 4 Mbit of Flash memory
  • A secondary Flash memory for boot or data
  • Over 3,000 gates of Flash programmable logic
  • 64 Kbit SRAM
  • Reconfigurable I/O ports
  • Programmable power management.

FEATURES SUMMARY
■ 5 V±10% Single Supply Voltage:
■ Up to 4 Mbit of Primary Flash Memory (8 uniform sectors)
■ 256Kbit Secondary Flash Memory (4 uniform sectors)
■ Up to 64 Kbit SRAM
■ Over 3,000 Gates of PLD: DPLD and CPLD
■ 52 Reconfigurable I/O ports
■ Enhanced JTAG Serial Port
■ Programmable power management
■ High Endurance:
   – 100,000 Erase/Write Cycles of Flash Memory
   – 1,000 Erase/Write Cycles of PLD

 

STMicroelectronics
ST-Microelectronics

View

PSD801F2V-C-70U[Configurable Memory System on a Chip for 8-Bit Microcontrollers]

other part :PSD4133F-12B81   PSD4133F-12B81I   PSD4133F-12J   PSD4133F-12JI   PSD4133F-12M   PSD4133F-12MI   PSD4133F-12U  

Introduction
The PSD8XX series of Programmable Microcontroller (MCU) Peripherals brings In-System-Programmability (ISP) to Flash memory and programmable logic. The result is a simple and flexible solution for embedded designs. PSD8XX devices combine many of the peripheral functions found in MCU based applications:
  • 4 Mbit of Flash memory
  • A secondary Flash memory for boot or data
  • Over 3,000 gates of Flash programmable logic
  • 64 Kbit SRAM
  • Reconfigurable I/O ports
  • Programmable power management.

FEATURES SUMMARY
■ 5 V±10% Single Supply Voltage:
■ Up to 4 Mbit of Primary Flash Memory (8 uniform sectors)
■ 256Kbit Secondary Flash Memory (4 uniform sectors)
■ Up to 64 Kbit SRAM
■ Over 3,000 Gates of PLD: DPLD and CPLD
■ 52 Reconfigurable I/O ports
■ Enhanced JTAG Serial Port
■ Programmable power management
■ High Endurance:
   – 100,000 Erase/Write Cycles of Flash Memory
   – 1,000 Erase/Write Cycles of PLD

 

STMicroelectronics
ST-Microelectronics

View

PSD801F3-B-90U[Configurable Memory System on a Chip for 8-Bit Microcontrollers]

other part :PSD4133F-12B81   PSD4133F-12B81I   PSD4133F-12J   PSD4133F-12JI   PSD4133F-12M   PSD4133F-12MI   PSD4133F-12U  

Introduction
The PSD8XX series of Programmable Microcontroller (MCU) Peripherals brings In-System-Programmability (ISP) to Flash memory and programmable logic. The result is a simple and flexible solution for embedded designs. PSD8XX devices combine many of the peripheral functions found in MCU based applications:
  • 4 Mbit of Flash memory
  • A secondary Flash memory for boot or data
  • Over 3,000 gates of Flash programmable logic
  • 64 Kbit SRAM
  • Reconfigurable I/O ports
  • Programmable power management.

FEATURES SUMMARY
■ 5 V±10% Single Supply Voltage:
■ Up to 4 Mbit of Primary Flash Memory (8 uniform sectors)
■ 256Kbit Secondary Flash Memory (4 uniform sectors)
■ Up to 64 Kbit SRAM
■ Over 3,000 Gates of PLD: DPLD and CPLD
■ 52 Reconfigurable I/O ports
■ Enhanced JTAG Serial Port
■ Programmable power management
■ High Endurance:
   – 100,000 Erase/Write Cycles of Flash Memory
   – 1,000 Erase/Write Cycles of PLD

 

STMicroelectronics
ST-Microelectronics

View

PSD801F3V-B-12U[Configurable Memory System on a Chip for 8-Bit Microcontrollers]

other part :PSD4133F-12B81   PSD4133F-12B81I   PSD4133F-12J   PSD4133F-12JI   PSD4133F-12M   PSD4133F-12MI   PSD4133F-12U  

Introduction
The PSD8XX series of Programmable Microcontroller (MCU) Peripherals brings In-System-Programmability (ISP) to Flash memory and programmable logic. The result is a simple and flexible solution for embedded designs. PSD8XX devices combine many of the peripheral functions found in MCU based applications:
  • 4 Mbit of Flash memory
  • A secondary Flash memory for boot or data
  • Over 3,000 gates of Flash programmable logic
  • 64 Kbit SRAM
  • Reconfigurable I/O ports
  • Programmable power management.

FEATURES SUMMARY
■ 5 V±10% Single Supply Voltage:
■ Up to 4 Mbit of Primary Flash Memory (8 uniform sectors)
■ 256Kbit Secondary Flash Memory (4 uniform sectors)
■ Up to 64 Kbit SRAM
■ Over 3,000 Gates of PLD: DPLD and CPLD
■ 52 Reconfigurable I/O ports
■ Enhanced JTAG Serial Port
■ Programmable power management
■ High Endurance:
   – 100,000 Erase/Write Cycles of Flash Memory
   – 1,000 Erase/Write Cycles of PLD

 

STMicroelectronics
ST-Microelectronics

View

PSD801G1-A-15U[Configurable Memory System on a Chip for 8-Bit Microcontrollers]

other part :PSD4133F-12B81   PSD4133F-12B81I   PSD4133F-12J   PSD4133F-12JI   PSD4133F-12M   PSD4133F-12MI   PSD4133F-12U  

Introduction
The PSD8XX series of Programmable Microcontroller (MCU) Peripherals brings In-System-Programmability (ISP) to Flash memory and programmable logic. The result is a simple and flexible solution for embedded designs. PSD8XX devices combine many of the peripheral functions found in MCU based applications:
  • 4 Mbit of Flash memory
  • A secondary Flash memory for boot or data
  • Over 3,000 gates of Flash programmable logic
  • 64 Kbit SRAM
  • Reconfigurable I/O ports
  • Programmable power management.

FEATURES SUMMARY
■ 5 V±10% Single Supply Voltage:
■ Up to 4 Mbit of Primary Flash Memory (8 uniform sectors)
■ 256Kbit Secondary Flash Memory (4 uniform sectors)
■ Up to 64 Kbit SRAM
■ Over 3,000 Gates of PLD: DPLD and CPLD
■ 52 Reconfigurable I/O ports
■ Enhanced JTAG Serial Port
■ Programmable power management
■ High Endurance:
   – 100,000 Erase/Write Cycles of Flash Memory
   – 1,000 Erase/Write Cycles of PLD

 

STMicroelectronics
ST-Microelectronics

View

PSD801G1V-20U[Configurable Memory System on a Chip for 8-Bit Microcontrollers]

other part :PSD4133F-12B81   PSD4133F-12B81I   PSD4133F-12J   PSD4133F-12JI   PSD4133F-12M   PSD4133F-12MI   PSD4133F-12U  

Introduction
The PSD8XX series of Programmable Microcontroller (MCU) Peripherals brings In-System-Programmability (ISP) to Flash memory and programmable logic. The result is a simple and flexible solution for embedded designs. PSD8XX devices combine many of the peripheral functions found in MCU based applications:
  • 4 Mbit of Flash memory
  • A secondary Flash memory for boot or data
  • Over 3,000 gates of Flash programmable logic
  • 64 Kbit SRAM
  • Reconfigurable I/O ports
  • Programmable power management.

FEATURES SUMMARY
■ 5 V±10% Single Supply Voltage:
■ Up to 4 Mbit of Primary Flash Memory (8 uniform sectors)
■ 256Kbit Secondary Flash Memory (4 uniform sectors)
■ Up to 64 Kbit SRAM
■ Over 3,000 Gates of PLD: DPLD and CPLD
■ 52 Reconfigurable I/O ports
■ Enhanced JTAG Serial Port
■ Programmable power management
■ High Endurance:
   – 100,000 Erase/Write Cycles of Flash Memory
   – 1,000 Erase/Write Cycles of PLD

 

STMicroelectronics
ST-Microelectronics

View
1 2 3 4 5 6 7 8 9 10


Key Word
System  Voltage  Analog  Audio  Axial  Battery  Bipolar  Bridge  Camera  Chip  Clock  Color  Connector  Control  Controller  Converter  Counter  Crystal  Decoder  Digital 

@ 2014 - 2018  [ Home ] [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]