Qdatasheet_Logo    Integrated circuits, Transistor, Semiconductors Search and Free Datasheet PDF Download Site
Part Number :
Home  >>>  STD1 Datasheet

STD1

  

Datasheet PDF

Match, Like N/A
Start with STD10* STD11* STD12* STD13* STD14* STD15* STD16* STD17* STD18* STD19* STD1H* STD1L* STD1N*
End *TSTD1 *KSTD1 *ASTD1 *FSTD1
Included *STD1-*

FSTD16861[20-Bit Bus Switch with Level Shifting]

other part :FSTD16861MTD  

General Description
The Fairchild Switch FSTD16861 provides 20-bits of high speed CMOS TTL-compatible bus switching. The low On Resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise. A diode to VCC has been integrated into the circuit to allow for level shifting between 5V inputs and 3.3V outputs.
The device is organized as a 10-bit or 20-bit bus switch. When OE1 is LOW, the switch is ON and Port 1A is connected to Port 1B. When OE2 is LOW, Port 2A is connected to Port 2B. When OEX is HIGH, a high impedance state exists between the A and B Ports.

Features
■ 4: switch connection between two ports.
■ Minimal propagation delay through the switch.
■ Low lCC.
■ Zero bounce in flow-through mode.
■ Control inputs compatible with TTL level.
■ TruTranslation™ voltage translation from 5.0V inputs to 3.3V outputs
■ Power-off high impedance inputs and outputs
■ Supports live insertion/withdrawal (Note 1)
Note 1: To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pull-up resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.

Fairchild Semiconductor
Fairchild

View

FSTD16861MTD[20-Bit Bus Switch with Level Shifting]

other part :FSTD16861  

General Description
The Fairchild Switch FSTD16861 provides 20-bits of high speed CMOS TTL-compatible bus switching. The low On Resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise. A diode to VCC has been integrated into the circuit to allow for level shifting between 5V inputs and 3.3V outputs.
The device is organized as a 10-bit or 20-bit bus switch. When OE1 is LOW, the switch is ON and Port 1A is connected to Port 1B. When OE2 is LOW, Port 2A is connected to Port 2B. When OEX is HIGH, a high impedance state exists between the A and B Ports.

Features
■ 4: switch connection between two ports.
■ Minimal propagation delay through the switch.
■ Low lCC.
■ Zero bounce in flow-through mode.
■ Control inputs compatible with TTL level.
■ TruTranslation™ voltage translation from 5.0V inputs to 3.3V outputs
■ Power-off high impedance inputs and outputs
■ Supports live insertion/withdrawal (Note 1)
Note 1: To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pull-up resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.

Fairchild Semiconductor
Fairchild

View

MAX6715AUTSTD1[Dual/Triple, Ultra-Low-Voltage, SOT23 µP Supervisory Circuits]

other part :MAX6715A   MAX6715AUTLDD1   MAX6715AUTLDD1-T   MAX6715AUTLDD2   MAX6715AUTLDD2-T   MAX6715AUTLDD3   MAX6715AUTLDD3-T  

General Description
The MAX6715A–MAX6729A/MAX6797A are ultra-low-voltage microprocessor (µP) supervisory circuits designed to monitor two or three system power-supply voltages. These devices assert a system reset if any monitored supply falls below its factory-trimmed or adjustable threshold and maintain reset for a minimum timeout period after all supplies rise above their thresholds. The integrated dual/triple supervisory circuits significantly improve system reliability and reduce size compared to separate ICs or discrete components.

Features
♦ VCC1 (Primary Supply) Reset Threshold Voltages from 1.58V to 4.63V
♦ VCC2 (Secondary Supply) Reset Threshold Voltages from 0.79V to 3.08V
♦ Externally Adjustable RSTIN Threshold for Auxiliary/Triple-Voltage Monitoring
(0.62V Internal Reference)
♦ Watchdog Timer Option
  35s (min) Long Startup Period
  1.12s (min) Normal Timeout Period
♦ Manual-Reset Input Option
♦ Power-Fail Input/Power-Fail Output Option (Push-Pull and Open-Drain Active-Low)
♦ Guaranteed Reset Valid Down to VCC1 or VCC2 = 0.8V
♦ Reset Output Logic Options
♦ Immune to Short VCC Transients
♦ Low Supply Current 14µA (typ) at 3.6V
♦ Watchdog Disable Feature
♦ Small 5-, 6-, and 8-Pin SOT23 Packages

Applications
Multivoltage Systems
Telecom/Networking Equipment
Computers/Servers
Portable/Battery Operated Equipment
Industrial Equipment
Printers/Fax Machines
Set-Top Boxes

Maxim Integrated
MaximIC

View

MAX6716AUTSTD1[Dual/Triple, Ultra-Low-Voltage, SOT23 µP Supervisory Circuits]

other part :MAX6715A   MAX6715AUTLDD1   MAX6715AUTLDD1-T   MAX6715AUTLDD2   MAX6715AUTLDD2-T   MAX6715AUTLDD3   MAX6715AUTLDD3-T  

General Description
The MAX6715A–MAX6729A/MAX6797A are ultra-low-voltage microprocessor (µP) supervisory circuits designed to monitor two or three system power-supply voltages. These devices assert a system reset if any monitored supply falls below its factory-trimmed or adjustable threshold and maintain reset for a minimum timeout period after all supplies rise above their thresholds. The integrated dual/triple supervisory circuits significantly improve system reliability and reduce size compared to separate ICs or discrete components.

Features
♦ VCC1 (Primary Supply) Reset Threshold Voltages from 1.58V to 4.63V
♦ VCC2 (Secondary Supply) Reset Threshold Voltages from 0.79V to 3.08V
♦ Externally Adjustable RSTIN Threshold for Auxiliary/Triple-Voltage Monitoring
(0.62V Internal Reference)
♦ Watchdog Timer Option
  35s (min) Long Startup Period
  1.12s (min) Normal Timeout Period
♦ Manual-Reset Input Option
♦ Power-Fail Input/Power-Fail Output Option (Push-Pull and Open-Drain Active-Low)
♦ Guaranteed Reset Valid Down to VCC1 or VCC2 = 0.8V
♦ Reset Output Logic Options
♦ Immune to Short VCC Transients
♦ Low Supply Current 14µA (typ) at 3.6V
♦ Watchdog Disable Feature
♦ Small 5-, 6-, and 8-Pin SOT23 Packages

Applications
Multivoltage Systems
Telecom/Networking Equipment
Computers/Servers
Portable/Battery Operated Equipment
Industrial Equipment
Printers/Fax Machines
Set-Top Boxes

Maxim Integrated
MaximIC

View

MAX6717AUKSTD1[Dual/Triple, Ultra-Low-Voltage, SOT23 µP Supervisory Circuits]

other part :MAX6715A   MAX6715AUTLDD1   MAX6715AUTLDD1-T   MAX6715AUTLDD2   MAX6715AUTLDD2-T   MAX6715AUTLDD3   MAX6715AUTLDD3-T  

General Description
The MAX6715A–MAX6729A/MAX6797A are ultra-low-voltage microprocessor (µP) supervisory circuits designed to monitor two or three system power-supply voltages. These devices assert a system reset if any monitored supply falls below its factory-trimmed or adjustable threshold and maintain reset for a minimum timeout period after all supplies rise above their thresholds. The integrated dual/triple supervisory circuits significantly improve system reliability and reduce size compared to separate ICs or discrete components.

Features
♦ VCC1 (Primary Supply) Reset Threshold Voltages from 1.58V to 4.63V
♦ VCC2 (Secondary Supply) Reset Threshold Voltages from 0.79V to 3.08V
♦ Externally Adjustable RSTIN Threshold for Auxiliary/Triple-Voltage Monitoring
(0.62V Internal Reference)
♦ Watchdog Timer Option
  35s (min) Long Startup Period
  1.12s (min) Normal Timeout Period
♦ Manual-Reset Input Option
♦ Power-Fail Input/Power-Fail Output Option (Push-Pull and Open-Drain Active-Low)
♦ Guaranteed Reset Valid Down to VCC1 or VCC2 = 0.8V
♦ Reset Output Logic Options
♦ Immune to Short VCC Transients
♦ Low Supply Current 14µA (typ) at 3.6V
♦ Watchdog Disable Feature
♦ Small 5-, 6-, and 8-Pin SOT23 Packages

Applications
Multivoltage Systems
Telecom/Networking Equipment
Computers/Servers
Portable/Battery Operated Equipment
Industrial Equipment
Printers/Fax Machines
Set-Top Boxes

Maxim Integrated
MaximIC

View

MAX6718AUKSTD1[Dual/Triple, Ultra-Low-Voltage, SOT23 µP Supervisory Circuits]

other part :MAX6715A   MAX6715AUTLDD1   MAX6715AUTLDD1-T   MAX6715AUTLDD2   MAX6715AUTLDD2-T   MAX6715AUTLDD3   MAX6715AUTLDD3-T  

General Description
The MAX6715A–MAX6729A/MAX6797A are ultra-low-voltage microprocessor (µP) supervisory circuits designed to monitor two or three system power-supply voltages. These devices assert a system reset if any monitored supply falls below its factory-trimmed or adjustable threshold and maintain reset for a minimum timeout period after all supplies rise above their thresholds. The integrated dual/triple supervisory circuits significantly improve system reliability and reduce size compared to separate ICs or discrete components.

Features
♦ VCC1 (Primary Supply) Reset Threshold Voltages from 1.58V to 4.63V
♦ VCC2 (Secondary Supply) Reset Threshold Voltages from 0.79V to 3.08V
♦ Externally Adjustable RSTIN Threshold for Auxiliary/Triple-Voltage Monitoring
(0.62V Internal Reference)
♦ Watchdog Timer Option
  35s (min) Long Startup Period
  1.12s (min) Normal Timeout Period
♦ Manual-Reset Input Option
♦ Power-Fail Input/Power-Fail Output Option (Push-Pull and Open-Drain Active-Low)
♦ Guaranteed Reset Valid Down to VCC1 or VCC2 = 0.8V
♦ Reset Output Logic Options
♦ Immune to Short VCC Transients
♦ Low Supply Current 14µA (typ) at 3.6V
♦ Watchdog Disable Feature
♦ Small 5-, 6-, and 8-Pin SOT23 Packages

Applications
Multivoltage Systems
Telecom/Networking Equipment
Computers/Servers
Portable/Battery Operated Equipment
Industrial Equipment
Printers/Fax Machines
Set-Top Boxes

Maxim Integrated
MaximIC

View

MAX6719AUTSTD1[Dual/Triple, Ultra-Low-Voltage, SOT23 µP Supervisory Circuits]

other part :MAX6715A   MAX6715AUTLDD1   MAX6715AUTLDD1-T   MAX6715AUTLDD2   MAX6715AUTLDD2-T   MAX6715AUTLDD3   MAX6715AUTLDD3-T  

General Description
The MAX6715A–MAX6729A/MAX6797A are ultra-low-voltage microprocessor (µP) supervisory circuits designed to monitor two or three system power-supply voltages. These devices assert a system reset if any monitored supply falls below its factory-trimmed or adjustable threshold and maintain reset for a minimum timeout period after all supplies rise above their thresholds. The integrated dual/triple supervisory circuits significantly improve system reliability and reduce size compared to separate ICs or discrete components.

Features
♦ VCC1 (Primary Supply) Reset Threshold Voltages from 1.58V to 4.63V
♦ VCC2 (Secondary Supply) Reset Threshold Voltages from 0.79V to 3.08V
♦ Externally Adjustable RSTIN Threshold for Auxiliary/Triple-Voltage Monitoring
(0.62V Internal Reference)
♦ Watchdog Timer Option
  35s (min) Long Startup Period
  1.12s (min) Normal Timeout Period
♦ Manual-Reset Input Option
♦ Power-Fail Input/Power-Fail Output Option (Push-Pull and Open-Drain Active-Low)
♦ Guaranteed Reset Valid Down to VCC1 or VCC2 = 0.8V
♦ Reset Output Logic Options
♦ Immune to Short VCC Transients
♦ Low Supply Current 14µA (typ) at 3.6V
♦ Watchdog Disable Feature
♦ Small 5-, 6-, and 8-Pin SOT23 Packages

Applications
Multivoltage Systems
Telecom/Networking Equipment
Computers/Servers
Portable/Battery Operated Equipment
Industrial Equipment
Printers/Fax Machines
Set-Top Boxes

Maxim Integrated
MaximIC

View

MAX6720AUTSTD1[Dual/Triple, Ultra-Low-Voltage, SOT23 µP Supervisory Circuits]

other part :MAX6715A   MAX6715AUTLDD1   MAX6715AUTLDD1-T   MAX6715AUTLDD2   MAX6715AUTLDD2-T   MAX6715AUTLDD3   MAX6715AUTLDD3-T  

General Description
The MAX6715A–MAX6729A/MAX6797A are ultra-low-voltage microprocessor (µP) supervisory circuits designed to monitor two or three system power-supply voltages. These devices assert a system reset if any monitored supply falls below its factory-trimmed or adjustable threshold and maintain reset for a minimum timeout period after all supplies rise above their thresholds. The integrated dual/triple supervisory circuits significantly improve system reliability and reduce size compared to separate ICs or discrete components.

Features
♦ VCC1 (Primary Supply) Reset Threshold Voltages from 1.58V to 4.63V
♦ VCC2 (Secondary Supply) Reset Threshold Voltages from 0.79V to 3.08V
♦ Externally Adjustable RSTIN Threshold for Auxiliary/Triple-Voltage Monitoring
(0.62V Internal Reference)
♦ Watchdog Timer Option
  35s (min) Long Startup Period
  1.12s (min) Normal Timeout Period
♦ Manual-Reset Input Option
♦ Power-Fail Input/Power-Fail Output Option (Push-Pull and Open-Drain Active-Low)
♦ Guaranteed Reset Valid Down to VCC1 or VCC2 = 0.8V
♦ Reset Output Logic Options
♦ Immune to Short VCC Transients
♦ Low Supply Current 14µA (typ) at 3.6V
♦ Watchdog Disable Feature
♦ Small 5-, 6-, and 8-Pin SOT23 Packages

Applications
Multivoltage Systems
Telecom/Networking Equipment
Computers/Servers
Portable/Battery Operated Equipment
Industrial Equipment
Printers/Fax Machines
Set-Top Boxes

Maxim Integrated
MaximIC

View

MAX6721AUTSTD1[Dual/Triple, Ultra-Low-Voltage, SOT23 µP Supervisory Circuits]

other part :MAX6715A   MAX6715AUTLDD1   MAX6715AUTLDD1-T   MAX6715AUTLDD2   MAX6715AUTLDD2-T   MAX6715AUTLDD3   MAX6715AUTLDD3-T  

General Description
The MAX6715A–MAX6729A/MAX6797A are ultra-low-voltage microprocessor (µP) supervisory circuits designed to monitor two or three system power-supply voltages. These devices assert a system reset if any monitored supply falls below its factory-trimmed or adjustable threshold and maintain reset for a minimum timeout period after all supplies rise above their thresholds. The integrated dual/triple supervisory circuits significantly improve system reliability and reduce size compared to separate ICs or discrete components.

Features
♦ VCC1 (Primary Supply) Reset Threshold Voltages from 1.58V to 4.63V
♦ VCC2 (Secondary Supply) Reset Threshold Voltages from 0.79V to 3.08V
♦ Externally Adjustable RSTIN Threshold for Auxiliary/Triple-Voltage Monitoring
(0.62V Internal Reference)
♦ Watchdog Timer Option
  35s (min) Long Startup Period
  1.12s (min) Normal Timeout Period
♦ Manual-Reset Input Option
♦ Power-Fail Input/Power-Fail Output Option (Push-Pull and Open-Drain Active-Low)
♦ Guaranteed Reset Valid Down to VCC1 or VCC2 = 0.8V
♦ Reset Output Logic Options
♦ Immune to Short VCC Transients
♦ Low Supply Current 14µA (typ) at 3.6V
♦ Watchdog Disable Feature
♦ Small 5-, 6-, and 8-Pin SOT23 Packages

Applications
Multivoltage Systems
Telecom/Networking Equipment
Computers/Servers
Portable/Battery Operated Equipment
Industrial Equipment
Printers/Fax Machines
Set-Top Boxes

Maxim Integrated
MaximIC

View

MAX6722AUTSTD1[Dual/Triple, Ultra-Low-Voltage, SOT23 µP Supervisory Circuits]

other part :MAX6715A   MAX6715AUTLDD1   MAX6715AUTLDD1-T   MAX6715AUTLDD2   MAX6715AUTLDD2-T   MAX6715AUTLDD3   MAX6715AUTLDD3-T  

General Description
The MAX6715A–MAX6729A/MAX6797A are ultra-low-voltage microprocessor (µP) supervisory circuits designed to monitor two or three system power-supply voltages. These devices assert a system reset if any monitored supply falls below its factory-trimmed or adjustable threshold and maintain reset for a minimum timeout period after all supplies rise above their thresholds. The integrated dual/triple supervisory circuits significantly improve system reliability and reduce size compared to separate ICs or discrete components.

Features
♦ VCC1 (Primary Supply) Reset Threshold Voltages from 1.58V to 4.63V
♦ VCC2 (Secondary Supply) Reset Threshold Voltages from 0.79V to 3.08V
♦ Externally Adjustable RSTIN Threshold for Auxiliary/Triple-Voltage Monitoring
(0.62V Internal Reference)
♦ Watchdog Timer Option
  35s (min) Long Startup Period
  1.12s (min) Normal Timeout Period
♦ Manual-Reset Input Option
♦ Power-Fail Input/Power-Fail Output Option (Push-Pull and Open-Drain Active-Low)
♦ Guaranteed Reset Valid Down to VCC1 or VCC2 = 0.8V
♦ Reset Output Logic Options
♦ Immune to Short VCC Transients
♦ Low Supply Current 14µA (typ) at 3.6V
♦ Watchdog Disable Feature
♦ Small 5-, 6-, and 8-Pin SOT23 Packages

Applications
Multivoltage Systems
Telecom/Networking Equipment
Computers/Servers
Portable/Battery Operated Equipment
Industrial Equipment
Printers/Fax Machines
Set-Top Boxes

Maxim Integrated
MaximIC

View
1 2 3 4


Key Word
System  Voltage  Analog  Audio  Axial  Battery  Bipolar  Bridge  Camera  Chip  Clock  Color  Connector  Control  Controller  Converter  Counter  Crystal  Decoder  Digital 

@ 2014 - 2018  [ Home ] [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]