Qdatasheet_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

PCA9541

  

Datasheet PDF - Philips Electronics

Part Name
Description
MFG CO.
Other PDF
  no available.
PDF
DOWNLOAD     
PCA9541 image

DESCRIPTION
The PCA9541 is a 2-to-1 I2C master selector designed for high reliability dual master I2C applications where system operation is required, even when one master fails or the controller card is removed for maintenance. The two masters (e.g., primary and back-up) are located on separate I2C-buses that connect to the same downstream I2C-bus slave devices. I2C commands are sent
by either I2C-bus master and are used to select one master at a time. Either master at any time can gain control of the slave devices if the other master is disabled or removed from the system. The failed master is isolated from the system and will not affect communication between the on-line master and the slave devices on the downstream I2C-bus.

FEATURES
• 2-to-1 bi-directional master selector
• I2C interface logic; compatible with SMBus standards
• PCA9541/01 powers-up with Channel 0 selected
• PCA9541/02 powers-up with Channel 0 selected after STOP condition detected (bus idle) on Channel 0
• PCA9541/03 powers-up with no channel selected and either master can take control of the bus
• Active LOW Interrupt Input
• 2 Active LOW Interrupt Outputs
• Active LOW Reset Input
• 4 address pins allowing up to 16 devices on the I2C-bus
• Channel selection via I2C-bus
• Bus initialization/recovery function
• Bus traffic sensor
• Low RdsON switches
• Allows voltage level translation between 1.8 V, 2.5 V, 3.3 V and 5 V buses
• No glitch on power-up
• Supports hot insertion
• Software identical for both masters
• Low stand-by current
• Operating power supply voltage range of 2.3 V to 5.5 V
• 6.0 V tolerant Inputs
• 0 to 400 kHz clock frequency
• ESD protection exceeds 2000 V HBM per JESD22-A114, 200 V MM per JESD22-A115 and 1000 V CDM per JESD22-C101
• Latch-up testing is done to JESDEC Standard JESD78 which exceeds 100 mA
• Packages offered: SO16, TSSOP16, HVQFN16

APPLICATIONS
• High reliability systems with dual masters
• Gatekeeper multiplexer on long single bus
• Bus initialization/recovery for slave devices without hardware reset
• Allows masters without arbitration logic to share resources


Part NO.
Description
PDF
MFC CO.
2-to-1 I2C-bus master selector with interrupt logic and reset
NXP Semiconductors.
2-to-1 I2C-bus master selector with interrupt logic and reset
NXP Semiconductors.
2-channel I2C switch with interrupt logic and reset
Philips Electronics
2-channel I2C switch with interrupt logic and reset
Philips Electronics
2-channel I2C-bus switch with interrupt logic and reset ( Rev : 2009 )
NXP Semiconductors.
2-channel I2C-bus switch with interrupt logic and reset ( Rev : 2014 )
NXP Semiconductors.
2-channel I2C-bus switch with interrupt logic and reset
NXP Semiconductors.
4-channel I2C switch with interrupt logic and reset
Philips Electronics
4-channel I2C switch with interrupt logic and reset
Philips Electronics
4-channel I2C-bus switch with interrupt logic and reset
NXP Semiconductors.

Share Link: 


All Rights Reserved © qdatasheet.com [ Privacy Policy ] [ Contact Us ]