15 Amp General Purpose
Users should thoroughly review the technical data before selecting a product
part number. It is recommended that users also seek out the pertinent approvals
files of the agencies/laboratories and review them to ensure the product meets
the requirements for a given application.
• K10 - DPDT contact arrangement standard.
• AC and DC coils.
• Mounting options include socket, PCB, top flange.
• UL Class B coil insulation system.
Contact Data @ 25°C
Materials: Silver-cadmium oxide.
Expected Life: 10 million operations, mechanical; 100,000
operations minimum at rated loads.
15A @ 30VDC
15A @ 120VAC
10A @ 277VAC
1/3HP @ 120VAC
1/2HP @ 250VAC
*For 220/240VDC operation, use 11,000 Ohm, 5 Watt dropping resistor
in series with the 110VDC coil.
Operate Data @ 25°C
Must Operate Voltage:
DC Coils: 75% of nominal voltage.
AC Coils: 85% of nominal voltage.
Operate Time (Excluding Bounce): 13 milliseconds, typical, at nominal
Release Time (Excluding Bounce): 6 milliseconds, typical, at nominal
Initial Dielectric Strength
Between Open Contacts: 1,000V rms.
Between Adjacent Contacts: 1,500V rms.
Between Contacts and Coil: 1,500V rms.
Storage: -60°C to +105°C.
Operating: -45°C to +70°C.
Coil Data @ 25°C
DC Coils: .9 Watts.
AC Coils: 1.2VA.
Maximum Power: 2.0 Watts.
Duty Cycle: Continuous.
Insulation: Class B: (130°C).
Mounting: Socket mount, printed circuit board, top flange.
Termination: .187" (4.75mm) quick connect/solder terminals, or
printed circuit terminals.
Enclosure: Smoke-color polycarbonate dust cover.
Weight: 1.8 oz. (51g) approximately.
Dimensions are shown for
720 reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
Specifications and availability
subject to change.
Refer to inside back cover.