GENERAL DESCRIPTION
The ADP1055 is a flexible, feature-rich digital secondary side controller that targets ac-to-dc and isolated dc-to-dc secondary side applications. The ADP1055 is optimized for minimal component count, maximum flexibility, and minimum design time. Features include differential remote voltage sense, primary and secondary side current sense, pulse-width modulation (PWM) generation, frequency synchronization, redundant OVP, and current sharing. The control loop digital filter and compensation terms are integrated and can be programmed over the PMBus™ interface. Programmable protection features include overcurrent (OCP), overvoltage (OVP) limiting, undervoltage lockout (UVLO), and external overtemperature (OTP).
FEATURES
−40°C to +125°C operation
PMBus Revision 1.2 compliant with PEC and extended manufacturer specific commands
32-bit password protection with command masking
64 address selections (16 base addresses, expandable to 64)
6 PWM control signals, 625 ps resolution
Frequency from 48 kHz to 1 MHz
Duty cycle double update rate
Digital control loop (PID + additional pole or zero configurability)
Programmable loop filters (CCM, DCM, low/normal temperature)
Fast line voltage feedforward
Adaptive dead time compensation for improved efficiency
Remote voltage sense
Redundant programmable OVP
Current sense Primary side cycle-by-cycle fast protection Secondary side cycle-by-cycle fast overcurrent protection Secondary side averaged reverse current protection using diode emulation mode with fixed debounce
Synchronous rectifier control for improved efficiency in light load mode
Nonlinear gain for faster transient response from DCM to CCM
Frequency synchronization
Soft start and soft stop functionality
Average and peak constant current mode
External PN junction temperature sensing
4 GPIOs (2 GPIOs configurable as active clamp snubber PWMs)
Extended black box data recorder for fault recording
User trimming on input and output voltages and currents
Digital current sharing
APPLICATIONS
Isolated dc-to-dc power supplies and modules
Redundant power supply systems
|