Description
The TS83102G0B is a monolithic 10-bit analog-to-digital converter, designed for digitizing wide bandwidth analog signals at very high sampling rates of up to 2 Gsps. It uses an innovative architecture, including an on-chip Sample and Hold (S/H). The 3.3 GHz full power input bandwidth and band flatness performances enable the digitizing of high IF and large bandwidth signals.
Features
• Up to 2 Gsps Sampling Rate
• Power Consumption: 4.6 W
• 500 mVpp Differential 100 Ω or Single-ended 50 Ω (±2 %) Analog Inputs
• Differential 100 Ω or Single-ended 50 Ω Clock Inputs
• ECL or LVDS Output Compatibility
• 50 Ω Differential Outputs with Common Mode not Dependent on Temperature
• ADC Gain Adjust
• Sampling Delay Adjust
• Offset Control Capability
• Data Ready Output with Asynchronous Reset
• Out-of-range Output Bit
• Selectable Decimation by 32 Functions
• Gray or Binary Selectable Output Data; NRZ Output Mode
• Pattern Generator Output (for Acquisition System Monitoring)
• Radiation Tolerance Oriented Design (More Than 100 Krad (Si) Expected)
• CBGA 152 Cavity Down Hermetic Package
• CBGA Package Evaluation Board TSEV83102G0BGL
• Companion Device: DMUX 8-/10-bit 1:4/1:8 2 Gsps TS81102G0
Performance
• 3.3 GHz Full Power Input Bandwidth (-3 dB)
• Gain Flatness: ± 0.2 dB (from DC up to 1.5 GHz)
• Low Input VSWR: 1.2 Max from DC to 2.5 GHz
• SFDR = -59 dBc; 7.6 Effective Bits at FS = 1.4 Gsps, FIN = 700 MHz [-1 dBFS]
• SFDR = -53 dBc; 7.1 Effective Bits at Fs = 1.4 Gsps, FIN = 1950 MHz [-1 dBFS]
• SFDR = -54 dBc; 6.5 Effective Bits at FS = 2 Gsps, FIN = 2 GHz [-1 dBFS]
• Low Bit Error Rate (10-12) at 2 Gsps
Application
• Direct RF Down Conversion
• Wide Band Satellite Receiver
• High-speed Instrumentation
• High-speed Acquisition Systems
• High-energy Physics
• Automatic Test Equipment
• Radar
|