Qdatasheet_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Searchword :
Description : MIL-STD-1553B NOTICE 2 ADVANCED INTEGRATED MUX HYBRIDS WITH ENHANCED RT FEATURES (AIM-HY’er)

DESCRIPTION
DDC’s bus-61559 series of Advanced Integrated Mux Hybrids with enhanced RT Features (AIM-HY’er) comprise a complete interface between a micro processor and a MIL-STD-1553B Notice 2 bus, implementing bus Controller (BC), Remote Terminal (RX, and Monitor Terminal (MT) modes. Packaged in a single 78-pin DIP or 82-pin flat package the bus-61559 series contains dual low-power transceivers and encoder/decoders, complete BC/RT/MT protocol logic, memory management and interrupt logic, 8K x 16 of shared static RAM, and a direct, buffered interface to a host processor bus.

FEATURES
• Complete Integrated 1553B Notice 2 Interface Terminal
• Functlonal Superset of bus- 61553 AlM-HYSeries
• Internal Address and Data Buffers for Dlrect Interface to Processor bus
• RT Subaddress Circular Buffers to Support Bulk Data Transfers
• Optlonal Separatlon of RT Broadcast Data
• Internal Interrupt Status and Time Tag Registers
• Internal ST Command Illegalization
• MIL-PRF-38534 Processing Available

Description : MIL-STD-1553B NOTICE 2 ADVANCED INTEGRATED MUX HYBRIDS WITH ENHANCED RT FEATURES (AIM-HY’er)

[Data Device Corporation]

DESCRIPTION
DDC’s bus-61559 series of Advanced Integrated Mux Hybrids with enhanced RT Features (AIM-HY’er) comprise a complete interface between a micro processor and a MIL-STD-1553B Notice 2 bus, implementing bus Controller (BC), Remote Terminal (RX, and Monitor Terminal (MT) modes. Packaged in a single 78-pin DIP or 82-pin flat package the bus-61559 series contains dual low-power transceivers and encoder/decoders, complete BC/RT/MT protocol logic, memory management and interrupt logic, 8K x 16 of shared static RAM, and a direct, buffered interface to a host processor bus.

FEATURES
• Complete Integrated 1553B Notice 2 Interface Terminal
• Functlonal Superset of bus- 61553 AlM-HYSeries
• Internal Address and Data Buffers for Dlrect Interface to Processor bus
• RT Subaddress Circular Buffers to Support Bulk Data Transfers
• Optlonal Separatlon of RT Broadcast Data
• Internal Interrupt Status and Time Tag Registers
• Internal ST Command Illegalization
• MIL-PRF-38534 Processing Available

Description : METALLIZED POLYESTER

EFC Series 1313 are metallized polyester capacitors. This series offers the advantage of small size, self healing and low cost. Suggested applications include: medical electronics, telecommunications and high voltage power supplies. Packaging options include: wrap and fill (TF, TC), radial lead box (EFR), axial lead (EC, EF). Application options include: high voltage (HV), "AC" across the line (AC), noise suppression (RC) and switching power supply (SP).
   
1. TEMPERATURE RANGE
    - 55 °C to + 85 °C at rated voltage.
    To 125 °C at 50% derating.
2. CAPACITANCE
    Capacitors < 1.0 MFD shall be measured
    at 1 KHz + 20 HZ. Capacitors >1.0 MFD
    shall be measured at 120 HZ. Measurements
    shall be taken at 25 °C.
3. DIELECTRIC STRENGTH
    At 25 °C, 150% of rated voltage when applied
    terminal to terminal for one minute through a
    current limiting resistance.
4. INSULATION RESISTANCE
    At 25 °C after 2 minutes charge time at rated voltage
    or 500 VDC, whichever is less, the minimum IR shall
    be 30,000 Megohm-Microfarad, but need not exceed
    50,000 Megohms for voltages greater than 50 VDC,
    and 15,000 Megohm-Microfarads, but need not exceed
    30,000 Megohms for 50 VDC or less.
5. HUMIDITY RESISTANCE
    Series 1313 shall meet the requirements
    of MIL-STD. 202C, Method 103B.
6. DISSIPATION FACTOR
    Shall be 1.0 % max. when measured as in Par. 2.
7. LIFE TEST
    Will withstand the application of 150% rated voltage at +125 °C for 250 hours
    with not more than one failure in 12 permitted.
   

Description : Surface Mount Transient Voltage Suppressor

Surface Mount Transient Voltage Suppressor
Voltage Range 6.8 to 200 Volts 1500 Watts Peak Power

Features
◇ For surface mounted application in order to optimize board space
◇ Low profile package 
◇ Built-in strain relief
◇ Glass passivated junction
◇ Excellent clamping capability
◇ Fast response time: Typically less than 1.0ps from 0 volt to BV min.
◇ Typical IRless than 1μA above 10V
◇ High temperature soldering guaranteed:  260OC / 10 seconds at terminals
◇ Plastic material used carries Underwriters Laboratory
   Flammability Classification 94V-0
◇ 1500 watts peak pulse power capability with a 10 X 1000 us
   waveform by 0.01% duty cycle

Description : 1500 WATT AXIAL TRANSIENT VOLTAGE SUPPRESSORS

Protect sensitive electronics against voltage transients induced by inductive load switching and lightning. Ideal for the protection of I/O interfaces, Vcc bus, and other integrated circuits used in telecom, computer, datacom and industrial electronics.

FEATURES
● Breakdown voltage range 6.8 to 440 Volts
● Uni-directional and Bi-directional
● Glass passivated junction
● Low clamping factor
● 100% surge tested
● UL recognised

Description : 1500W TRANSIENT VOLTAGE SUPPRESSORS

Features
● Glass Passivated Die Construction
● 1500W Peak Pulse Power Dissipation
● 6.8V – 440V Standoff Voltage
● Uni- and Bi-Directional Versions Available
● Excellent Clamping Capability
● Fast Response Time
● Plastic Case Material has UL Flammability
   Classification Rating 94V-O

Description : 1500W TRANSIENT VOLTAGE SUPPRESSORS

Features
● Glass Passivated Die Construction
● 1500W Peak Pulse Power Dissipation
● 6.8V – 440V Standoff Voltage
● Uni- and Bi-Directional Versions Available
● Excellent Clamping Capability
● Fast Response Time
● Plastic Case Material has UL Flammability Classification Rating 94V-O

Description : 1.27mm Pitch Multi-function Two Piece Connector

■ Features
1. Various connection with various product line
2. Easy One-Touch Operation
   The ribbon cable connection type allows easy one-touch operation with either single hand.
3. Board to board type
   ① Flux swell prevention
      The straight through hole type takes the complete fluxtight action from the board back side at solder dipping. The type is prepared, corresponding to whether or not cleaning is required.
   ② Stack height 12mm to 16mm
      The board stack height can be set to every 1 mm unit up to 12 to 16mm.
   ③ Mis-insertion preventive mechanism
      The mating area is designed in a mechanism so as to prevent mis-insertion, and complete countermeasures have been taken against wrenching.
4. Board to cable type
   ① Complete lock with easy operation
      Employing the inner lock system, complete lock and eject actions can be performed with easy operation.
   ② Applicable cable
      The applicable cable is the AWG#28 flat cable (7/0.127mm), and the jacket size is 0.9±0.1mm.
5. SMT type
   Strength security with metaltab
      The right angle type is equipped with metaltab to secure soldering strength, and constructed so as to fix by screws. The straight type can choose whether or not metaltab are required.
  
■ Applications
  Computers, peripheral equipments, various machines etc.

 

Description : 1500 Watt Transient Voltage Suppressors 6.8V to 550 Volts

Features
• Economical Series and Quick Response
• Available in Both Unidirectional and Bidirectional Construction
• 1500Watts Peak Power Dissipation
• Excellent Clamping Capability
• Lead Free Finish/RoHS Compliant(Note 1) ("P" Suffix designates RoHS Compliant. See ordering information)
• UL Recognized File#E331408
• Epoxy meets UL 94 V-0 flammability rating
• Moisture Sensitivity Level 1

 

Description : Polypropylene Pulse/High Frequency Capacitors R76 Series Double Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade)

Overview
The R76 Series is constructed of polypropylene film and double metallized polyester film as electrodes with radial leads of tinned wire. The radial leads are electrically welded to the metal layer on the ends of the capacitor winding. The capacitor is encapsulated in a self-extinguishing solvent resistant plastic case with thermosetting resin material meeting the UL 94V–0 requirements.

Benefts
• Voltage range: 250 – 2,000 VDC
• Capacitance range: 100 pF – 15 µF
• Lead Spacing: 7.5 mm – 37.5 mm
• Capacitance tolerance: ±5%, ±10%, ±20%
• Climatic category: 55/105/56 IEC 60068-1
• Operating temperature range of −55˚C to +105˚C
• RoHS compliance and lead-free terminations
• Tape and reel packaging in accordance with IEC 60286–2
• Self-healing
• Automotive (AEC–Q200) grades available up to lead spacing 22.5mm

12345678910 Next


All Rights Reserved © qdatasheet.com [ Privacy Policy ] [ Contact Us ]