Qdatasheet_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Searchword :
Description : 50-60W Isolated Wide-Range DC/DC Converters

PRODUCT OVERVIEW
Wide range 4:1 inputs on the 1.50" x 1.90" x 0.38" converter are either 9 to 36 Volts DC (Q12 models) or 18 to 75 Volts DC (Q48 models), ideal for battery-powered and telecom equipment. Fixed output voltages from 3.3 VDC to 15 VDC are regulated to within ±0.05% and may be trimmed within ±10% of nominal output. Applications nclude small instruments, computer-based systems, data communications equipment, remote sensor systems, vehicle and portable electronics.

FEATURES
Small footprint DC/DC converter, ideal for high current applications
Industry standard 1.50˝ x 1.90˝ x 0.38˝ open frame package and pinout
Wide range input voltages 9-36 and 18-75Vdc
Assembly and attachment for RoHS standards
Isolation up to 2250 VDC (basic)
Up to 50-60W total output power with overtemperature shutdown
High effi ciency synchronous rectifi er forward topology
Stable no-lead operation with no required external components
–40 to +85°C temperature range with derating
Designed to meet UL60950-1, CSA-C22.2 No. 234, EN60950-1 safety approvals
Extensive self-protection shut down features
RoHS6 compliant

Description : 1.25 Gbps bi-directional SC Receptacle single Fiber Transceiver

Features
• Single Mode Single Fiber 2x5 SFF SC Receptacle connector
• Gigabit Ethernet Compliant
• Single +3.3V Power Supply
• Tx 1310nm/Rx 1550 nm [B-13/15-1250C-F(DFB)-SSCx]
• Tx 1550nm/Rx 1310 nm [B-15/13-1250C-F(DFB)-SSCx]
• LVPECL Differential Inputs and Outputs
• LVTTL Signal Detection Output
• Class 1 Laser Int. Safety Standard IEC-825 Compliant
• EMI Shielding Finger Optional
• RoHS compliance available

Description : 1.25 Gbps bi-directional SC Receptacle single Fiber Transceiver

Features
• Single Mode Single Fiber 2x5 SFF SC Receptacle connector
• Gigabit Ethernet Compliant
• Single +3.3V Power Supply
• Tx 1310nm/Rx 1550 nm [B-13/15-1250C-F(DFB)-SSCx]
• Tx 1550nm/Rx 1310 nm [B-15/13-1250C-F(DFB)-SSCx]
• LVPECL Differential Inputs and Outputs
• LVTTL Signal Detection Output
• Class 1 Laser Int. Safety Standard IEC-825 Compliant
• EMI Shielding Finger Optional
• RoHS compliance available

Description : PIN RECEPTACLES

[MILL-MAX]

PIN RECEPTACLES

FOR .015” - .020” DIAMETER PINS (#11 CONTACT) AND .015” - .022” DIAMETER PINS (#21 CONTACT)
(SEE SPECIFIC CONTACT RANGE ON PAGE 251)

Description : PIN RECEPTACLES

[Mill-Max]

PIN RECEPTACLES

FOR .015” - .025” DIAMETER PINS

SPECIFICATIONS:
    Shell Material: Brass Alloy 360, 1/2 Hard
    Contact Material: Beryllium Copper Alloy 172, HT
    Dimensions: Inches
    Tolerances On: Lengths: ± .005
                              Diameters: ± .002
                              Angles: ± 2 °

Description : Network Interface Device

Bourns® Model 7004C NID provides a secure and weather resistant enclosure for Telco service for residential or commercial installations. The 7004C supplies station protection and test access points and can be confi gured for a maximum of two POTS lines and one 1740-xx coax protector. The 7004C features convenient cable knockouts and generous working space for wire management.

Features
■ Accepts POTS lines &Amp; coaxial protector
■ Manufactured from high-impact resistant, ultraviolet-desensitized, fl ame retardant plastic
■ Optional sealed switching jacks with Insulation Displacement Connectors (IDC)
■ Subscriber lockable with Telco override
■ Convenient ground attachment
■ UL Listed per UL 497 (File: E53117)

Description : Network Interface Device

Features
■Accepts POTS lines &Amp; Coaxial Protector
■Manufactured from high-impact resistant, ultraviolet-desensitized, flame retardant, UL Recognized plastic
■Optional sealed switching jacks with Insulation Displacement Connectors (IDCs)
■Subscriber lockable with Telco override
■Convenient ground attachment

Description : Flash In-System-Programmable Peripherals for 16-Bit MCUs

Introduction
The PSD4000 series of Programmable Microcontroller (MCU) Peripherals brings In-System-Programmability (ISP) to Flash memory and programmable logic. The result is a simple and flexible solution for embedded designs. PSD4000 devices combine many of the peripheral functions found in MCU based applications:
   • 4 Mbit of Flash memory
   • A secondary Flash memory for boot or data
   • Over 3,000 gates of Flash programmable logic
   • 64 Kbit SRAM
   • Reconfigurable I/O ports
   • Programmable power management.

FEATURES SUMMARY
■ 5 V±10% Single Supply Voltage:
■ Up to 4 Mbit of Primary Flash Memory (8 uniform sectors)
■ 256Kbit Secondary Flash Memory (4 uniform sectors)
■ Up to 64 Kbit SRAM
■ Over 3,000 Gates of PLD: DPLD and CPLD
■ 52 Reconfigurable I/O ports
■ Enhanced JTAG Serial Port
■ Programmable power management
■ High Endurance:
   – 100,000 Erase/Write Cycles of Flash Memory
   – 1,000 Erase/Write Cycles of PLD

Description : FOR .015” - .025” DIAMETER PINS

[Mill-Max]

SPECIFICATIONS:

    Shell Material: Brass Alloy 360, 1/2 Hard
    Contact Material: Beryllium Copper Alloy 172, HT
    Dimensions: Inches
    Tolerances On: Lengths: ± .005 Diameters: ± .002 Angles: ± 2 °

Description : PIN RECEPTACLES PCB SOCK PC SOLDER MOUNT

for .015” - .025” diameter pins

12345678910 Next


All Rights Reserved © qdatasheet.com [ Privacy Policy ] [ Contact Us ]