Qdatasheet_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Searchword :
Description : 32-bit Microcontrollers (up to 256 KB Flash and 64 KB SRAM) with Audio and Graphics Interfaces, USB, and Advanced Analog

Operating Conditions
• 2.3V to 3.6V, -40ºC to +105ºC, DC to 40 MHz
• 2.3V to 3.6V, -40ºC to +85ºC, DC to 50 MHz

Core: 50 MHz/83 DMIPS MIPS32® M4K®
• MIPS16e® mode for up to 40% smaller code size
• Code-efficient (C and Assembly) architecture
• Single-cycle (MAC) 32x16 and two-cycle 32x32 multiply

Clock Management
• 0.9% internal oscillator
• Programmable PLLs and oscillator clock sources
• Fail-Safe Clock Monitor (FSCM)
• Independent Watchdog Timer
• Fast wake-up and start-up

Power Management
• Low-power management modes (Sleep and Idle)
• Integrated Power-on Reset and Brown-out Reset
• 0.5 mA/MHz dynamic current (typical)
• 20 μA IPD current (typical)

Audio Interface Features
• Data communication: I2S, LJ, RJ, and DSP modes
• Control interface: SPI and I2C™
• Master clock:
- Generation of fractional clock frequencies
- Can be synchronized with USB clock
- Can be tuned in run-time

Advanced Analog Features
• ADC Module:
- 10-bit 1.1 Msps rate with one S&H
- Up to 10 analog inputs on 28-pin devices and 13
analog inputs on 44-pin devices
• Flexible and independent ADC trigger sources
• Charge Time Measurement Unit (CTMU):
- Supports mTouch™ capacitive touch sensing
- Provides high-resolution time measurement (1 ns)
- On-chip temperature measurement capability
• Comparators:
- Up to three Analog Comparator modules
- Programmable references with 32 voltage points

Description : Military DC-DC Converters 10 to 50W

Product Highlights
The MI-J00 family of miniaturized DC-DC converters is designed for military applications utilizing distributed power architectures. Based on Vicor’s 1st Generation family of zero-current/zero-voltage switching, component-level, DC-DC converters, the MI-J00 family offers state-of-the-art performance in terms of power density, efficiency, noise, ease of use, and reliability.
The MI-J00 family is designed to exceed all steady-state, transient and under/overvoltage requirements of MIL-STD-704D/E for both 28Vdc input (MI-J20) and 270Vdc input (MI-J60), and the worst case envelope of DOD-STD-1399A for 155Vdc input.
The output voltage can be externally trimmed or programmed from 50% to 110% of nominal output. Current limiting, remote sense, and an inhibit pin all combine to offer a high degree of protection, versatility, and reliability for military power systems.
All units are manufactured in ISO 9001-registered facilities. Full epoxy encapsulation in Vicor’s industry standard package enables the MI-J00 family units to meet MIL-STD-810 environmental testing requirements for humidity, fungus, salt fog, explosive atmosphere, acceleration, vibration, and shock. (See page 32.)

Features
♦ Inputs:
   28Vdc per MIL-STD-704D/E
   155Vdc per MIL-STD-1399A
   270Vdc per MIL-STD-704D/E
♦ Single output: 2 – 48Vdc
♦ Up to 23W/in3
♦ MIL-STD-810 environments
♦ Up to 90% efficiency
♦ Remote sense
♦ Current limit
♦ ZVS/ZCS power architecture
♦ Low noise FM control
♦ Size:
   2.28" x 2.4" x 0.5"
   57,9 x 61,0 x 12,7mm)

Description : 10-50 WATTS MILITARY COTS DC/DC CONVERTER

Features
• 28Vdc and 270Vdc Inputs per MIL-STD-704D/E/F
• 155Vdc inputs per MIL-STD-1399A
• MIL-STD-810 environments
• Up to 23 W/in3
• 80-90% Efficiency
• Remote sense and current limit

Description : Single Phase Hall Effect Latch

„ General Description
AH477/480 is the integrated Hall sensor with output drivers designed for electrical commutation of brush-less DC motor application. The devices are included as follows: on-chip Hall voltage generator for magnetic sensing; the error amplifier that amplifies the Hall voltage; a comparator is to
provide switching hysteresis for noise rejection; the bi-direction drivers for sinking and driving large
current load. Internal bandgap regulator is used to provide temperature compensated bias for internal

„ Features
- On-chip Hall sensor
- Bi-direction H type output drivers for single coil
- Internal bandgap regulator allows temperature compensated operations and a wide operating voltage range
- High output sourcing/sinking capability up to 350mA
- Operating voltage: 3.5V~20V
- Low output switching current noise
- Auto-shutdown and auto-restart provided (AH480)
- SIP-4L package for AH477; SIP-5L, MSOP-8L packages for AH480

„ Applications
- Single-coil Brush-less DC Fan
- Single-coil Brush-less DC Motor

circuits and allows a wide operating supply voltage
range. On top of that, AH480 provides auto
shutdown and auto restart function for the DC fan to
consume less power in the lock up condition.

Description : Clamp Type AC Current Sensors For energy management systems

Overview of the CCT Series

■ FEATURES
● Clamp type for easy installation on existing power equipment.
● Accommodates automatic processes from wire wrapping and winding to soldering,
   eusuring high-quality and stable supply.
● Equipped with a built-in open-circuit protective device.
● Product compatible with RoHS directive.

■ APPLICATION
   For energy management systems such as HEMS, BEMS, FEMS, CEMS

Description : Cannon Rack and Panel Connectors

Cannon Rack and Panel
ITT Electronic Components is a division of the multi national ITT Corporation a $7.5 billion dollar global enterprise. Our connector portfolio remains the most extensive in the industry offering the most reliable and cost effective range of interconnect solutions. These innovations have enabled ITT to provide products and technologies to such markets as:

   • Aerospace
   • Computers Systems
   • Defense Electronics
   • Geophysical
   • Industrial Automation
   • Medical Electronics

When you specify a Cannon Rack and Panel connector, you can rely on a product designed, developed, and manufactured to the highest quality and reliability standards in the industry. This tradition of excellence is based on ITT’s corporate culture of operating its entire business under the principles of Six Sigma. At ITT, Six Sigma is not just a quality philosophy but a complete corporate culture that drives the entire business. Our Value Based Management and Value Based Product Development systems are two cornerstones of ITT that allows for the development of both leadership and product development principles, ensuring that the correct industry leading products are developed to the accepted market driven lead times. These principles have allowed ITT to become the market leader in all of our business portfolios.

BKAD/E/F
● Low insertion force contacts.
● Both environmental and non- environmental versions.
● Polarizing posts that are removable from the mating face.
● Field replaceable inserts for size 22 and power contacts.
● Up to 800 size 22 contacts in one connector.
● Crimp, coax, power, printed circuit and wire wrappable post style contacts.
● Uses standard DPX crimp, insertion/extraction tooling.
● Waveguide connections available.

Description : Military Chassis Mount DC-DC Converters 10 to 300W Single, Dual, Triple Outputs

[Vicor]

Product Highlights
Vicor’s MI-MegaMod family of single, dual, and triple output DC-DC converters provide power system designers with costeffective, high-performance, offthe-shelf solutions to applications that might otherwise require a custom supply.

Features
● Inputs: 28, 155, 165 and 270Vdc
● Any output: 2 to 48Vdc
● Up to 13.5W/in3
● High efficiency
● Remote sense
● ZVS/ZCS power architecture
● Low noise FM control
● Size — 1- up half-size: 2.58" x 2.5" x 0.62" (65,5 x 63,5 x 15,7mm)
● Size — 1- up full-size: 4.9" x 2.5" x 0.62" (124,5 x 63,5 x 15,7mm)
● Size — 2- up half-size: 2.58" x 4.9" x 0.62" (65,5 x 124,5 x 15,7mm)
● Size — 2- up full-size: 4.9" x 4.9" x 0.62" (124,5 x 124,5 x 15,7mm)
● Size — 3- up half-size: 2.58" x 7.3" x 0.62" (65,5 x 185,4 x 15,7mm)
● Size — 3- up full-size: 4.9" x 7.3" x 0.62" (124,5 x 185,4 x 15,7mm)

Description : Hermetically Sealed, Low IF, Wide VCC, High Gain Optocouplers

Description
These units are single, dual, and quad channel, hermetically sealed optocoup lers. The products are capable of operation and storage over the full military temperature range and can be purchased as either standard product or with full MIL-PRF-38534 Class Level H or K testing or from the appro priate DLA Drawing. All devices are manufactured and tested on a MIL-PRF-38534 certified line and are included in the DLA Quali fied Manufacturers List QML-38534 for Hybrid Microcircuits.

Features
• Dual marked with device part number and DLA drawing number
• Manufactured and tested on a MIL-PRF-38534 Certified Line
• QML-38534, Class H and K
• Five hermetically sealed package configurations
• Performance guaranteed over full military temperature range: -55°C to +125°C
• Low input current requirement: 0.5 mA
• High current transfer ratio: 1500% typical @ IF = 0.5 mA
• Low output saturation voltage: 0.11 V typical
• 1500 Vdc withstand test voltage
• High radiation immunity
• 6N138/9, HCPL-2730/31 function compatibility
• Reliability data

Applications
• Military and aerospace
• High reliability systems
• Telephone ring detection
• Microprocessor system interface
• Transportation, medical, and life critical systems
• Isolated input line receiver
• EIA RS-232-C line receiver
• Voltage level shifting
• Isolated input line receiver
• Isolated output line driver
• Logic ground isolation
• Harsh industrial environments
• Current loop receiver
• System test equipment isolation
• Process control input/output isolation

Description : Hermetically Sealed, Low IF, Wide VCC, High Gain Optocouplers

Description
These units are single, dual, and quad channel, hermetically sealed optocoup lers. The products are capable of operation and storage over the full military temperature range and can be purchased as either standard product or with full MIL-PRF-38534 Class Level H or K testing or from the appro priate DLA Drawing. All devices are manufactured and tested on a MIL-PRF-38534 certified line and are included in the DLA Quali fied Manufacturers List QML-38534 for Hybrid Microcircuits.

Features
• Dual marked with device part number and DLA drawing number
• Manufactured and tested on a MIL-PRF-38534 Certified Line
• QML-38534, Class H and K
• Five hermetically sealed package configurations
• Performance guaranteed over full military temperature range: -55°C to +125°C
• Low input current requirement: 0.5 mA
• High current transfer ratio: 1500% typical @ IF = 0.5 mA
• Low output saturation voltage: 0.11 V typical
• 1500 Vdc withstand test voltage
• High radiation immunity
• 6N138/9, HCPL-2730/31 function compatibility
• Reliability data

Applications
• Military and aerospace
• High reliability systems
• Telephone ring detection
• Microprocessor system interface
• Transportation, medical, and life critical systems
• Isolated input line receiver
• EIA RS-232-C line receiver
• Voltage level shifting
• Isolated input line receiver
• Isolated output line driver
• Logic ground isolation
• Harsh industrial environments
• Current loop receiver
• System test equipment isolation
• Process control input/output isolation

Description : Hermetically Sealed, Low IF, Wide VCC, High Gain Optocouplers

Description
These units are single, dual, and quad channel, hermetically sealed optocouplers. The products are capable of operation and storage over the full military temperature range and can be  purchased as either standard product or with full MIL-PRF-38534 Class Level H or K testing or from the appropriate DSCC Drawing. All devices are manufactured and tested on a MIL-PRF-38534 certified line and are included in the DSCC Qualified Manufacturers List QML-38534 for Hybrid Microcircuits.

Features
• Dual Marked with Device Part Number and DSCC Drawing Number
• Manufactured and Tested on a MIL-PRF-38534 Certified Line
• QML-38534, Class H and K
• Five Hermetically Sealed Package Configurations
• Performance Guaranteed, Over -55°C to +125°C
• Low Input Current Requirement: 0.5 mA
• High Current Transfer Ratio: 1500% Typical @IF = 0.5 mA
• Low Output Saturation Voltage: 0.11 V Typical
• 1500 Vdc Withstand Test Voltage
• High Radiation Immunity
• 6N138/9, HCPL-2730/31 Function Compatibility
• Reliability Data

Applications
• Military and Space
• High Reliability Systems
• Telephone Ring Detection
• Microprocessor System Interface
• Transportation, Medical, and Life Critical Systems
• Isolated Input Line Receiver
• EIA RS-232-C Line Receiver
• Voltage Level Shifting
• Isolated Input Line Receiver
• Isolated Output Line Driver
• Logic Ground Isolation
• Harsh Industrial Environments
• Current Loop Receiver
• System Test Equipment Isolation
• Process Control Input/Output Isolation

 

12345678910 Next


All Rights Reserved © qdatasheet.com [ Privacy Policy ] [ Contact Us ]