GENERAL DESCRIPTION The C48 Series describes a family of connectors qualified to MIL-C-26500. While maintaining the MIL-C-26500 mating interface, this product has also been expanded to include qualifications to numerous Boeing specifications to satisfy general purpose requirements and unique product challenges for shielding, environmental sealing, fluid resistance, and vibration.
FEATURES ■ Qualified to MIL-C-26500. ■ Styles qualified to Boeing BACC45 Series. ■ Styles qualified to Boeing BACC63 Series. ■ Power Contact Sizes: 20, 16, and 12. ■ Coax Contacts Available: Size 12 and 8. ■ Contacts: Crimp - Front release. ■ Optional Fixed Contacts: PC Termination. ■ Coupling Styles: Bayonet and Threaded. ■ Environmentally Sealed.
The PV connector is designed to meet the rugged requirements of MIL-C-26482, Series 2/MIL-C-83723 Series I*, the specification which delineates the critical requirements of space-age applications. PV connectors have been used extensively on major aerospace programs requiring general-purpose, miniature cylindrical bayonet coupling connectors such as Space Shuttle, Apollo, ATM, OWS Minuteman, Skylab, Thor-Delta, Titan IIIC, and Viking. The PV series is an important member of the Universal Interconnect System (UIS) - the only system that can perform all interconnection missions. This system is adaptable for use with connectors of all shapes and sizes, including circular and rectangular configurations. standard, miniature and subminiature sizes. UIS is a rear servicing system that evolved from the LITTLE CAESAR® rear release contact retention assembly, pioneered and developed by ITT Cannon. Since this time, ITT Cannon, and its licensees, have supplied to industry over 250 million interconnections utilizing this system.
PV7 connectors are available under numerous in dustrial specifications, some of which are listed below: • CS512089 Jet Propulsion Laboratory • 40M39569 NASA, George C. Marshall Space Flight Center • 81D52 Martin Marietta, Denver Division • MG414-0365 Rockwell International Space Division • AC414-0013 Rockwell International Autonetics Division • STS0003 McDonnell Douglas Astronautics
The RN5VS Series are voltage detector ICs with high detector threshold accuracy and ultra-low supply current by CMOS process, which can be operated at an extremely low voltage and is used, for instance, for system reset. Each of these ICs consists of a voltage reference unit, a comparator, resistors for voltage detection, an output driver and a hysteresis circuit. The detector threshold is fixed with high accuracy.
The RN5VS Series are operable by a lower voltage than that for the R×5VL Series, and can be driven by a single battery. Two output types, Nch open drain type and CMOS type, are available. Since the package for these ICs are SOT-23-5 (Mini-mold) package, high density mounting of the ICs on board is possible.
The SUMICON 1600 series are multi-contact connectors designed by Hirose. 8, 12, 16, 20, 24, 28, 34, 45 and 60-contact models available (same as the 1300 series). The connector units are available in three types: soldering, wrapping, and crimping. Accessories are C case, CA case, CBA case, ST stopper, STA stopper, and STB stopper, By combining the many options noted above, the SUMICON 1600 series connectors meet a wide variety applications.
Standard Type General In the SUMICON 1600 series, the connector unit is completely separated from the Accessories such as the cases and stoppers to diversify the specificaions and facilitate wiring connection. The SUMICON 1600 series are specified in the NTT specifications No.1931.
Introduction Electrical connectors designed for : - Engines and boosters - Harsh environment area
Electrical connector threaded coupling with self locking (all connectors).
Those connector series are in accordance with the standards EN 2997, MIL-DTL-83723 Series III, NF-L 54143 and SAE/AS 39029, EN 3155 and ESC30 for electrical contacts. As per specifications SBAC ESC10 and Boeing BACC63.
The following improvements have been brought to the standard MIL-DTL-83723 : - Shell to shell metal bottoming (Plug and receptacle mated). - Anti rotation system on 360° by tightening. - Self locking system all plug. - Reduced elastomer barriers to use new and old generations of wires.
All Deutsch 983 electrical connectors series are intermatable and interchangeable with connectors in accordance with MIL-DTL-83723 series III, NF-L 54143 and the Deutsch connectors 83730 series. A large Accessories range completes the 983 connector series : - Backnut. - Straight cable clamp. - Elbowed cable clamp - Potting cup. For any informations please consult us.