P/N + Description + Content Search

CHIP TANTALUM CAPACITOR - SMD
SOLID ELECTROLYTE, HIGH VOLUMETRIC EFFICIENCY, STABLEELECTRIC PERFORMANCES

FEATURES
• Molded case available in six case codes
• Compatible with all popular “High Volume” automatic pick and equipment
• Optical character recognition qualified

SOLID ELECTROLYTE, HIGH VOLUMETRIC EFFICIENCY, STABLE ELECTRIC PERFORMANCES

Features
- Molded case available in six case codes
- Compatible with all popular “High Volume” automatic pick and equipment
- Optical character recognition qualified

CHIP TANTALUM CAPACITOR - SMD
SOLID ELECTROLYTE, HIGH VOLUMETRIC EFFICIENCY, STABLEELECTRIC PERFORMANCES

FEATURES
● Molded case available in six case codes
● Compatible with all popular “High Volume” automatic pick and equipment
● Optical character recognition qualified
● RoHS Compliance & Lead Free Terminations.

INTRODUCTION
The TS20L Series is low ESR TANTALUM CHIP CAPACITOR suitable
For SMT electric board used for telecommunication computer camcorder and mobile phone set and so on
Low ESR value conform with EIA535BAAC size: Tape and Reeled per EIA481-1

FEATURES
• Operating temperature Range: -55℃ ~+125℃ (>80℃ with rated volted darating)
• Laser-markec Case
• Capacitance tolerance: +/-20%; +/-10% (for special order)
• DC leakage at 25℃ :1o<=0.01 Cr or 0.5Ma (Whichever is greater)
• Dimensions rated voltage and nominal capacitance Please see Table 1 & 2 and Figure 1

Introduction
The EKT Series is low ESR TANTALUM CHIP CAPACITOR suitable
For SMT electric board used for telecommunication computer camcorder and mobile phone set and so on Low ESR value conform with EIA535BAAC size: Tape and Reeled per EIA481-1

Features
- Operating temperature Range: -55℃ to +125℃ (>80℃ with rated voltage derating)
- Laser-mark Case
- Capacitance tolerance: M(±20%); K(±10% , for special order)
- DC leakage at 25℃ : Io≤0.01CRVR or 0.5μ A (Whichever is greater)
- Dimensions rated voltage and nominal capacitance Please see Table 1 & 2 and Figure 1

INTRODUCTION
The TS20L Series is low ESR TANTALUM CHIP CAPACITOR suitable
For SMT electric board used for telecommunication computer camcorder and mobile phone set and so on
Low ESR value conform with EIA535BAAC size: Tape and Reeled per EIA481-1

FEATURES
• Operating temperature Range: -55℃ ~+125℃ (>80℃ with rated volted darating)
• Laser-markec Case
• Capacitance tolerance: +/-20%; +/-10% (for special order)
• DC leakage at 25℃ :1o<=0.01 Cr or 0.5Ma (Whichever is greater)
• Dimensions rated voltage and nominal capacitance Please see Table 1 & 2 and Figure 1

FEATURES
- Easy installation, economical, high performance.
- Molded case available in six case codes.
- 6 miniature case codes available.
- EIA standard case sizes.
- Compatible with “High Volume” automatic pick and place equipment.

[KEMET]

Capacitor, TANTALUM, SMD, Polymer, Molded, Low ESR, Non-Combustible, 33 uF, 3528, +/-20% Tol, 10 VDC (105C)

General Information
    Supplier: KEMET
    Application: Low ESR
    Sub Application: (NonCombustibleCathode)
    Part Type Description: SMD, Polymer, Molded, Low
    ESR, Non-Combustible
    Construction: Standard CHIP-Polymer
    Body Type: SMD CHIP
    Footprint: 3528
    Weight: 94.85 mg
    RoHS: Yes

FEATURES:
• Meets EIA-535BAAC standard
• Large capacitance in small size
• Exceptional stability in wide temperature range

APPLICATIONS:
• Widely used in PC, cell phones, notebooks and A/V products
• Noise suppression for power supply circuit
• Filtering for Audio circuit, blocking DC bias into earphone
• Power compensation for CPU to run at speed
• Energy storage for LED driving circuit

T521, TANTALUM, Polymer TANTALUM, 10 uF, 20%, 50 V, 7343, SMD, Polymer, Molded, Low ESR, Non-Combustible, 90 mOhms, Height Max = 3.1mm