Qdatasheet_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Searchword :
Part Name(s) : IDT72805LB35BG
IDT
Integrated Device Technology
Description : CMOS Dual ASYNCHRONOUS FIFO Dual 256 x 9, Dual 512 x 9, Dual 1,024 x 9, Dual 2,048 x 9, Dual 4,096 x 9, Dual 8,192 x 9

DESCRIPTION:
The IDT7280/7281/7282/7283/7284/7285 are Dual-FIFO memories that load and empty data on a first-in/first-out basis. These devices are functional and compatible to two IDT7200/7201/7202/7203/7204/7205 FIFOs in a single package with all associated control, data, and flag lines assigned to separate pins. The devices use Full and Empty flags to prevent data overflow and underflow and expansion logic to allow for unlimited expansion capability in both word size and depth.

FEATURES:
• The IDT7280 is equivalent to two IDT7200 256 x 9 FIFOs
• The IDT7281 is equivalent to two IDT7201 512 x 9 FIFOs
• The IDT7282 is equivalent to two IDT7202 1,024 x 9 FIFOs
• The IDT7283 is equivalent to two IDT7203 2,048 x 9 FIFOs
• The IDT7284 is equivalent to two IDT7204 4,096 x 9 FIFOs
• The IDT7285 is equivalent to two IDT7205 8,192 x 9 FIFOs
• Low power consumption
    — Active: 685 mW (max.)
    — Power-down: 83 mW (max.)
• Ultra high speed—12 ns access time
• Asynchronous and simultaneous read and write
• Offers optimal combination of data capacity, small foot print and functional flexibility
• Ideal for bi-directional, width expansion, depth expansion, bus-matching, and data sorting applications
• Status Flags: Empty, Half-Full, Full
• Auto-retransmit capability
• High-performance CMOS technology
• Space-saving TSSOP
• Industrial temperature range (–40°C to +85°C) is available

Description : CMOS Dual ASYNCHRONOUS FIFO Dual 256 x 9, Dual 512 x 9, Dual 1,024 x 9, Dual 2,048 x 9, Dual 4,096 x 9, Dual 8,192 x 9

DESCRIPTION:
The IDT7280/7281/7282/7283/7284/7285 are Dual-FIFO memories that load and empty data on a first-in/first-out basis. These devices are functional and compatible to two IDT7200/7201/7202/7203/7204/7205 FIFOs in a single package with all associated control, data, and flag lines assigned to separate pins. The devices use Full and Empty flags to prevent data overflow and underflow and expansion logic to allow for unlimited expansion capability in both word size and depth.

FEATURES:
• The IDT7280 is equivalent to two IDT7200 256 x 9 FIFOs
• The IDT7281 is equivalent to two IDT7201 512 x 9 FIFOs
• The IDT7282 is equivalent to two IDT7202 1,024 x 9 FIFOs
• The IDT7283 is equivalent to two IDT7203 2,048 x 9 FIFOs
• The IDT7284 is equivalent to two IDT7204 4,096 x 9 FIFOs
• The IDT7285 is equivalent to two IDT7205 8,192 x 9 FIFOs
• Low power consumption
   — Active: 685 mW (max.)
   — Power-down: 83 mW (max.)
• Ultra high speed—12 ns access time
• Asynchronous and simultaneous read and write
• Offers optimal combination of data capacity, small foot print and functional flexibility
• Ideal for bi-directional, width expansion, depth expansion, bus-matching, and data sorting applications
• Status Flags: Empty, Half-Full, Full
• Auto-retransmit capability
• High-performance CMOS technology
• Space-saving TSSOP
• Industrial temperature range (–40°C to +85°C) is available

 

Description : CMOS Dual ASYNCHRONOUS FIFO Dual 256 x 9, Dual 512 x 9, Dual 1,024 x 9, Dual 2,048 x 9, Dual 4,096 x 9, Dual 8,192 x 9

DESCRIPTION:
The IDT7280/7281/7282 are Dual-FIFO memories that load and empty data on a first-in/first-out basis. These devices are functional and compatible to two 7200/7201/7202 FIFOs kin a single package with all associated control, data, and flag lines assigned to separate pins. The devices use Full and Empty flags to prevent data overflow and underflow and expansion logic to allow for unlimited expansion capability in both word size and depth.

FEATURES:
• The 7280 is equivalent to two 7200 256x9 FIFOs
• The 7281 is equivalent to two 7201 512x9 FIFOs
• The 7282 is equivalent to two 7202 1024x9 FIFOs
• Low power consumption
   — Active: 1540 mW (max.)
   —Power-down: 5.50 mW (max.)
• Ultra high speed—15 ns access time
• Asynchronous and simultaneous read and write
• Offers optimal combination of data capacity, small foot print and functional flexibility
• Ideal for bi-directional, width expansion, depth expansion, bus-matching, and data sorting applications
• Status Flags: Empty, Half-Full, Full
• Auto-retransmit capability
• High-performance CMOS technology
• Space-saving TSSOP
• Industrial temperature range (-40oC to +85oC) is available, tested to military electrical specifications

Description : Dual CMOS SyncFIFO™ Dual 256 x 9, Dual 512 x 9, Dual 1,024 x 9, Dual 2,048 x 9, Dual 4,096 x 9, Dual 8,192 x 9

DESCRIPTION:
The IDT72801/72811/72821/72831/72841/72851 are Dual synchronous (clocked) FIFOs. The device is functionally equivalent to two IDT72201/72211/72221/72231/72241/72251 FIFOs in a single package with all associated control, data, and flag lines assigned to separate pins.
   
FEATURES:
• The IDT72801 is equivalent to two IDT72201 256 x 9 FIFOs
• The IDT72811 is equivalent to two IDT72211 512 x 9 FIFOs
• The IDT72821 is equivalent to two IDT72221 1,024 x 9 FIFOs
• The IDT72831 is equivalent to two IDT72231 2,048 x 9 FIFOs
• The IDT72841 is equivalent to two IDT72241 4,096 x 9 FIFOs
• The IDT72851 is equivalent to two IDT72251 8,192 x 9 FIFOs
• Offers optimal combination of large capacity, high speed,
    design flexibility and small footprint
• Ideal for prioritization, bidirectional, and width expansion
    applications
• 10 ns read/write cycle time for the IDT72801/72811/72821/72831/
    72841/72851
• Separate control lines and data lines for each FIFO
• Separate Empty, Full, Programmable Almost-Empty
    and Almost Full flags for each FIFO
• Enable puts output data lines in high-impedance state
• Space-saving 64-pin Thin Quad Flat Pack (TQFP) and Slim Thin
    Quad Flatpack (STQFP)
• Industrial temperature range (–40°C to +85°C) is available
• Green parts available, see ordering information
   

Description : CMOS Dual ASYNCHRONOUS FIFO Dual 256 x 9, Dual 512 x 9, Dual 1,024 x 9, Dual 2,048 x 9, Dual 4,096 x 9, Dual 8,192 x 9

DESCRIPTION:
The IDT7280/7281/7282/7283/7284/7285 are Dual-FIFO memories that load and empty data on a first-in/first-out basis. These devices are functional and compatible to two IDT7200/7201/7202/7203/7204/7205 FIFOs in a single package with all associated control, data, and flag lines assigned to separate pins. The devices use Full and Empty flags to prevent data overflow and underflow and expansion logic to allow for unlimited expansion capability in both word size and depth.

FEATURES:
• The IDT7280 is equivalent to two IDT7200 256 x 9 FIFOs
• The IDT7281 is equivalent to two IDT7201 512 x 9 FIFOs
• The IDT7282 is equivalent to two IDT7202 1,024 x 9 FIFOs
• The IDT7283 is equivalent to two IDT7203 2,048 x 9 FIFOs
• The IDT7284 is equivalent to two IDT7204 4,096 x 9 FIFOs
• The IDT7285 is equivalent to two IDT7205 8,192 x 9 FIFOs
• Low power consumption
   — Active: 685 mW (max.)
   — Power-down: 83 mW (max.)
• Ultra high speed—12 ns access time
• Asynchronous and simultaneous read and write
• Offers optimal combination of data capacity, small foot print
   and functional flexibility
• Ideal for bi-directional, width expansion, depth expansion,
   bus-matching, and data sorting applications
• Status Flags: Empty, Half-Full, Full
• Auto-retransmit capability
• High-performance CMOS technology
• Space-saving TSSOP
• Industrial temperature range (–40°C to +85°C) is available

Description : 3.3 VOLT CMOS Dual SyncFIFO Dual 256 x 18, Dual 512 x 18, Dual 1,024 x 18, Dual 2,048 x 18 and Dual 4,096 x 18

DESCRIPTION:
The IDT72V805/72V815/72V825/72V835/72V845 are Dual 18-bit-wide synchronous (clocked) First-in, First-out (FIFO) memories designed to run off a 3.3V supply for exceptionally low power consumption. One Dual IDT72V805/72V815/72V825/72V835/72V845 device is functionally equivalent to two IDT72V205/72V215/72V225/72V235/72V245 FIFOs in a single package with all associated control, data, and flag lines assigned to independent pins. These devices are very high-speed, low-power First-In, First-Out (FIFO) memories with clocked read and write controls.

FEATURES:
• The IDT72V805 is equivalent to two IDT72V205 256 x 18 FIFOs
• The IDT72V815 is equivalent to two IDT72V215 512 x 18 FIFOs
• The IDT72V825 is equivalent to two IDT72V225 1,024 x 18 FIFOs
• The IDT72V835 is equivalent to two IDT72V235 2,048 x 18 FIFOs
• The IDT72V845 is equivalent to two IDT72V245 4,096 x 18 FIFOs
• Offers optimal combination of large capacity (8K), high speed, design flexibility, and small footprint
• Ideal for the following applications:
   – Network switching
   – Two level prioritization of parallel data
   – Bidirectional data transfer
   – Bus-matching between 18-bit and 36-bit data paths
   – Width expansion to 36-bit per package
   – Depth expansion to 8,192 words per package
• 10 ns read/write cycle time
• 5V input tolerant
• IDT Standard or First Word Fall Through timing
• Single or double register-buffered Empty and Full Flags
• Easily expandable in depth and width
• Asynchronous or coincident Read and Write Clocks
• Asynchronous or synchronous programmable Almost-Empty and Almost-Full flags with default settings
• Half-Full flag capability
• Output enable puts output data bus in high-impedance state
• High-performance submicron CMOS technology
• Available in a 128-pin thin quad flatpack (TQFP)
• Industrial temperature range (–40°C to +85°C) is available
• Green parts available, see ordering information

Description : Complete Dual-Band Quadrature Transmitters

General Description
The MAX2360 Dual-band, triple-mode complete transmitter for cellular phones represents the most integrated and architecturally advanced solution to date for this application. The device takes a differential I/Q baseband input and mixes it up to IF through a quadrature modulator and IF variable-gain amplifier (VGA). The signal is then routed to an external bandpass filter and upconverted to RF through an SSB mixer and RF VGA. The signal is further amplified with an on-board PA driver. Dual IF synthesizers, Dual RF synthesizers, a local oscillator (LO) buffer, and a 3-wire programmable bus complete the basic functional blocks of this IC. The MAX2362 supports single-band, single-mode (PCS) operation. The MAX2364 supports single-band cellular Dual-mode operation.

Features
Dual-Band, Triple-Mode Operation
♦ +7dBm Output Power with -54dBc ACPR
♦ 100dB Power Control Range
♦ Supply Current Drops as Output Power Is Reduced
Dual Synthesizer for IF and RF LO
Dual On-Chip IF VCO
♦ QSPI/SPI/MICROWIRE-Compatible 3-Wire Bus
♦ Digitally Controlled Operational Modes
♦ +2.7V to +5.5V Operation
♦ Single Sideband Upconverter Eliminates SAW Filters

Applications
    Triple-Mode, Dual-Mode, or Single-Mode Mobile Phones
    Satellite Phones
    Wireless Data Links (WAN/LAN)
    Wireless Local Area Networks (LANs)
    High-Speed Data Modems
    High-Speed Digital Cordless Phones
    Wireless Local Loop (WLL)

Description : 3V 32M-BIT SERIAL FLASH MEMORY WITH Dual AND QUAD SPI

[winbond]

GENERAL DESCRIPTION
The W25Q32BV (32M-bit) Serial Flash memory provides a storage solution for systems with limited space, pins and power. The 25Q series offers flexibility and performance well beyond ordinary Serial Flash devices. They are ideal for code shadowing to RAM, executing code directly from Dual/Quad SPI (XIP) and storing voice, text and data. The device operates on a single 2.7V to 3.6V power supply with current consumption as low as 4mA active and 1µA for power-down.
The W25Q32BV array is organized into 16,384 programmable pages of 256-bytes each. Up to 256 bytes can be programmed at a time. Pages can be erased in groups of 16 (4KB sector erase), groups of 128 (32KB block erase), groups of 256 (64KB block erase) or the entire chip (chip erase). The W25Q32BV has 1,024 erasable sectors and 64 erasable blocks respectively. The small 4KB sectors allow for greater flexibility in applications that require data and parameter storage. (See figure 2.)
The W25Q32BV supports the standard Serial Peripheral Interface (SPI), and a high performance Dual/Quad output as well as Dual/Quad I/O SPI: Serial Clock, Chip Select, Serial Data I/O0 (DI), I/O1 (DO), I/O2 (/WP), and I/O3 (/HOLD). SPI clock frequencies of up to 104MHz are supported allowing equivalent clock rates of 208MHz (104MHz x 2) for Dual I/O and 320MHz (80MHz x 4) for Quad I/O when using the Fast Read Dual/Quad I/O instructions. These transfer rates can outperform standard Asynchronous 8 and 16-bit Parallel Flash memories. The Continuous Read Mode allows for efficient memory access with as few as 8-clocks of instruction-overhead to read a 24-bit address, allowing true XIP (execute in place) operation.

FEATURES
• Family of SpiFlash Memories
   – W25Q32BV: 32M-bit / 4M-byte (4,194,304)
   – 256-byte per programmable page
   – Standard SPI: CLK, /CS, DI, DO, /WP, /Hold
   – Dual SPI: CLK, /CS, IO0, IO1, /WP, /Hold
   – Quad SPI: CLK, /CS, IO0, IO1, IO2, IO3
• Highest Performance Serial Flash
   – 104MHz Dual SPI / 80MHz Quad SPI clocks
   – 208/320MHz equivalent Dual/Quad SPI
   – 40MB/S continuous data transfer rate
   – Up to 8X that of ordinary Serial Flash
   – More than 100,000 erase/program cycles(1)
   – More than 20-year data retention
• Efficient “Continuous Read Mode”
   – Low Instruction overhead
   – Continuous Read with 8/16/32/64-Byte Wrap
   – As few as 8 clocks to address memory
   – Allows true XIP (execute in place) operation
   – Outperforms X16 Parallel Flash
• Low Power, Wide Temperature Range
   – Single 2.7 to 3.6V supply
   – 4mA active current, <1µA Power-down (typ.)
   – -40°C to +85°C operating range
• Flexible Architecture with 4KB sectors
   – Uniform Sector/Block Erase (4/32/64K-bytes)
   – Program one to 256 bytes
   – Erase/Program Suspend & Resume
• Advanced Security Features
   – Software and Hardware Write-Protect
   – Top/Bottom, 4KB complement array protection
   – Power Supply Lock-Down and OTP protection
   – 64-Bit Unique ID for each device
   – Discoverable Parameters (SFDP) Register
   – 3X256-Byte Security Registers with OTP locks
   – Volatile & Non-volatile Status Register Bits
• Space Efficient Packaging
   – 8-pin SOIC 208-mil
   – 8-pad WSON 6x5-mm/8x6-mm(2)
   – 16-pin SOIC 300-mil
   – 8-pin PDIP 300-mil
   – 24-ball TFBGA 8x6-mm
   – Contact Winbond for KGD and other options

Part Name(s) : 5000
Intel
Intel
Description : Dual-Core Intel® Xeon® Processor

Introduction
The Dual-Core Intel® Xeon® Processor 5000 series are Intel Dual core products for Dual processor (DP) servers and workstations. The Dual-Core Intel Xeon Processor 5000 series are 64-bit server/workstation processors utilizing two physical Intel NetBurst® microarchitecture cores in one package. The Dual-Core Intel Xeon Processor 5000 series include enhancements to the Intel NetBurst microarchitecture while maintaining the tradition of compatibility with IA-32 software. Some key features include Hyper Pipelined Technology and an Execution Trace Cache. Hyper Pipelined Technology includes a multi-stage pipeline depth, allowing the processor to reach higher core frequencies. The Dual-Core Intel Xeon Processor 5000 series contain a total of 4 MB of L2 Advanced Transfer Cache, 2 MB per core. The 1066 MHz Front Side Bus (FSB) is a quad-pumped bus running off a 266 MHz system clock making 8.5 GBytes per second data transfer rates possible. The 667 MHz Front Side Bus (FSB) is a quad-pumped bus running off a 166 MHz system clock making 5.3 GBytes per second data transfer rates possible.

Features
Dual-Core processor
■ Available at 3.73 GHz processor speed
■ Includes 16-KB Level 1 data cache per core (2 x 16-KB)
■ Includes 12-KB Level 1 trace cache per core (2 x 12-KB)
■ 2-MB Advanced Transfer Cache per core (2 x 2-MB, On-die, full speed Level 2 (L2) Cache) with 8- way associativity and Error Correcting Code (ECC)
■ 667/1066 MHz front side bus
■ 65 nm process technology
Dual processing (DP) server support
■ Intel® NetBurst® microarchitecture
■ Hyper-Threading Technology allowing up to 8 threads per platform
■ Hardware support for multi-threaded applications
■ Intel® Virtualization Technology
■ Intel® Extended Memory 64 Technology (Intel® EM64T)
■ Execute Disable Bit (XD Bit)
■ Enables system support of up to 64 GB of physical memory
■ Enhanced branch prediction
■ Enhanced floating-point and multimedia unit for enhanced video, audio, encryption, and 3D performance
■ Advanced Dynamic Execution
■ Very deep out-of-order execution
■ System Management mode
■ Machine Check Architecture (MCA)
■ Interfaces to Memory Controller Hub

Description : 3V 8M-BIT SERIAL FLASH MEMORY WITH Dual AND QUAD SPI

GENERAL DESCRIPTION
The W25Q80DV (8M-bit) Serial Flash memory provides a storage solution for systems with limited space, pins and power. The 25Q series offers flexibility and performance well beyond ordinary Serial Flash devices. They are ideal for code shadowing to RAM, executing code directly from Dual/Quad SPI (XIP) and storing voice, text and data. The device operates on a single 2.7V to 3.6V power supply with current consumption as low as 1µA for power-down. All devices are offered in space-saving packages.
The W25Q80DV array is organized into 4,096 programmable pages of 256-bytes each. Up to 256 bytes can be programmed at a time. Pages can be erased in groups of 16 (4KB sector erase), groups of 128 (32KB block erase), groups of 256 (64KB block erase) or the entire chip (chip erase). The W25Q80DV has 256 erasable sectors and 16 erasable blocks respectively. The small 4KB sectors allow for greater flexibility in applications that require data and parameter storage. (See figure 2.)
The W25Q80DV supports the standard Serial Peripheral Interface (SPI), and a high performance Dual/Quad output as well as Dual/Quad I/O SPI: Serial Clock, Chip Select, Serial Data I/O0 (DI), I/O1 (DO), I/O2 (/WP), and I/O3 (/HOLD). SPI clock frequencies of up to 104MHz are supported allowing equivalent clock rates of 208MHz (104MHz x 2) for Dual I/O and 416MHz (104MHz x 4) for Quad I/O when using the Fast Read Dual/Quad I/O instructions. These transfer rates can outperform standard Asynchronous 8 and 16-bit Parallel Flash memories. A Hold pin, Write Protect pin and programmable write protection, with top, bottom or complement array control, provide further control flexibility. Additionally, the device supports JEDEC standard manufacturer and device identification with a 64-bit Unique Serial Number.

FEATURES
● Family of SpiFlash Memories
   – W25Q80DV: 8M-bit/1M-byte (1,048,576)
   – 256-byte per programmable page
   – Standard SPI: CLK,/CS,DI,DO,/WP,/Hold
   – Dual SPI: CLK, /CS, IO0, IO1, /WP, /Hold
   – Quad SPI: CLK, /CS, IO0, IO1, IO2, IO3
   – Uniform 4KB Sectors, 32KB & 64KB Blocks
● Highest Performance Serial Flash
   – 104MHz Dual/Quad SPI clocks
   – 208/416MHz equivalent Dual/Quad SPI
   – 50MB/S continuous data transfer rate
● Software and Hardware Write Protection
   – Write-Protect all or portion of memory
   – Enable/Disable protection with /WP pin
   – Top or bottom array protection
● Flexible Architecture with 4KB sectors
   – Uniform Sector/Block Erase (4/32/64-kbytes)
   – Program one to 256 bytes < 0.8ms
   – Erase/Program Suspend & Resume
   – More than 100,000 erase/write cycles
   – More than 20-year data retention
● Low Power, Wide Temperature Range
   – Single 2.7 to 3.6V supply
   – <1µA Power-down(typ.)
● Space Efficient Packaging(1):
   – 8-pin SOIC 150-mil/208mil, VSOP 150-mil
   – 8-pad WSON 6x5-mm, USON 2x3-mm
   – 8-pin PDIP 300-mil
   – 8-ball WLCSP
   – Contact Winbond for KGD and other options

12345678910 Next


All Rights Reserved © qdatasheet.com [ Privacy Policy ] [ Contact Us ]