Qdatasheet_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Searchword :
ADL Embedded Solutions
ADL Embedded Solutions
Description : Frame Grabber - Up to 16 Inputs with Vertical Connectors

Description
This MICROSPACE® PCI/104-Express expansion card is equipped with four Frame Grabber controllers (BT878) which are directly connected to the PCI/104-Express bus over a PCI to PCIe bridge. This design allows simultaneous input of up to 4x 30 Frames per second. Since each Frame Grabber has a 4 channel multiplexer available, a maximum of 16 video cameras can be connected.

Features
• 4x Frame Grabber BT878 (with PCIe/PCI Bridge)
• Up to 16 cameras
• PCI Express-Bus
• Banwidth for sim. capturing 3x PAL/NTSC
   resolution
• PCI-104 Pass Through Connector

Part Name(s) : MSMG104EX 801738
ADL Embedded Solutions
ADL Embedded Solutions
Description : Frame Grabber - Up to 16 Inputs with Right Angle Connectors

Description
The MSMG104EX MICROSPACE® PCI/104-Express expansion card is equipped with four Frame Grabber controllers (BT878) which are directly connected to the PCI/104-Express bus over a PCI to PCIe bridge. This design allows simultaneous input of up to 4x 30 Frames per second. Since each Frame Grabber has a 4 channel multiplexer available, a maximum of 16 video cameras can be connected (with 90° Connectors).

Features
• 4x Frame Grabber BT878 (with PCIe/PCI Bridge)
• Up to 16 cameras
• PCI Express-Bus
• Banwidth for sim. capturing 3x PAL/NTSC
   resolution
• PCI-104 Pass Through Connector

Part Name(s) : TDA8706 TDA8706T
Philips Electronics
Philips Electronics
Description : 6-bit analog-to-digital converter with multiplexer and clamp

GENERAL DESCRIPTION
The TDA8706 is a monolithic bipolar 6-bit Analog-to-Digital Converter (ADC) with a 3 analog input multiplexer and a clamp. All digital Inputs and outputs are TTL compatible. Regulator with good temperature compensation.

FEATURES
• 6-bit resolution
• Binary 3-state TTL outputs
• TTL compatible digital Inputs
• 3 multiplexed video Inputs
• Luminance and colour difference clamps
• Internal reference
• 300 mW power dissipation
• 20-pin plastic package.

APPLICATIONS
• General purpose video applications
• Y, U and V signals
• Colour Picture-in-Picture (PIPCO) for TV
• Videophone
Frame Grabber.

Description : X-Ray Line Sensor Camera

The C7390 Series X-ray line sensor camera offers high resolution and high sensitivity for capturing finely detailed X-ray images of products or parts moving along on a belt conveyor. X-ray images are obtained in synchronization with external timing signals from the transfer mechanism such as a belt conveyor or by internal timing signals, and are then output as RS-422 digital signals.

FEATURES
● High resolution
● Equipment with wider detection areas
● Available with 256 mm or 512 mm detector length
● Easily connectable to Frame Grabber board
    The signal output method of this X-ray line sensor camera is designed to handle commercially available, digital Frame Grabber boards.

APPLICATIONS
● Detection of foreign matter in the food processing industry
● Presense of dangerous objects in incinerators, like gas bottles, fire extingushers
● X-ray tomography for inspection of fuel tanks, moving parts in engines.

Description : 6-bit analog-to-digital converter with multiplexer and clamp

GENERAL DESCRIPTION
The TDA8706A is a 6-bit analog-to-digital converter (ADC) with 3 analog multiplexed Inputs. Each input has an analog clamp on code 0 for RGB video processing. Clamping level can also be adjusted externally up to code 20. It can also be used as a single 6-bit ADC.

FEATURES
• 6-bit resolution
• Binary 3-state CMOS outputs
• CMOS compatible digital Inputs
• 3 multiplexed video Inputs
• R, G and B clamps on code 0
• Single 6-bit ADC operation allowed up to 40 MSPS
• External control of clamping level
• Internal reference voltage (external reference allowed)
• Power dissipation only 36 mW (typical)
• Operating temperature of −40 to +85 °C
• Operating between 2.7 and 5.5 V.

APPLICATIONS
• General purpose video applications
• R, G and B signals
• Automotive (car navigation)
• LCD systems
Frame Grabber.

Fairchild Semiconductor
Fairchild Semiconductor
Description : Genlocking Video Digitizer

Description
The TMC22071A Genlocking Video Digitizer converts standard baseband composite NTSC or PAL video into 8-bit digital composite video data. It extracts horizontal and Vertical sync signals and generates a pixel clock for the on-board 8-bit A/D converter and a 2x clock for the transfer of data to subsequent video processing decoding or encoding with the TMC22x5y Video Decoder or TMC22x9x Digital Video Encoder family. It also measures the color subcarrier phase and frequency and provides this data to the Encoder (for genlocked color NTSC or PAL encoding), or a Frame buffer (for Frame capture) over the digital composite video port.

Features
• Fully integrated acquisition
• 3-channel video input multiplexer
• Two-stage video clamp
• Automatic gain adjustment
• Sync detection and separation
• Pixel and subpixel adjustment of HSYNC-to-Video timing
• Genlock to NTSC or PAL Inputs
• Clock generation
• 8-bit video A/D converter
• Microprocessor interface
• Line-locked pixel rates
    - 12.27 MHz NTSC
    - 13.5 MHz NTSC or PAL
• Direct interface to TMC22x9x encoders
• Built-in circuitry for crystal oscillator
• No tuning or external voltage reference required
• 68 Lead PLCC or 100 Lead MQFP package

Applications
Frame Grabber
• Digital VCR/VTR
• Desktop video

NXP Semiconductors.
NXP Semiconductors.
Description : 6-bit analog-to-digital converter with multiplexer and clamp

GENERAL DESCRIPTION
The TDA8706A is a 6-bit ADC with three analog multiplexed Inputs. Each input has an analog clamp on code 0 for RGB video processing. Clamping level can also be adjusted externally up to code 20. It can also be used as a single 6-bit ADC.

FEATURES
• 6-bit resolution
• Binary CMOS compatible outputs
• CMOS compatible digital Inputs
• TLL clock input
• Three multiplexed video Inputs
• R, G and B clamps on code 0
• Single 6-bit Analog-to-Digital Converter (ADC) operation
   allowed up to 40 MSPS
• External control of clamping level
• Internal reference voltage (external reference allowed)
• Power dissipation only 36 mW (typical)
• Operating temperature of −40 to +85 °C
• Operating between 2.7 and 3.6 V
• Sine wave clock allowed.

APPLICATIONS
• General purpose video applications
• R, G and B signals
• Automotive (car navigation)
• LCD systems
Frame Grabber

Cadeka Microcircuits LLC.
Cadeka Microcircuits LLC.
Description : Genlocking Video Digitizer

Description
The TMC22071A Genlocking Video Digitizer converts standard baseband composite NTSC or PAL video into 8-bit digital composite video data. It extracts horizontal and Vertical sync signals and generates a pixel clock for the on-board 8-bit A/D converter and a 2x clock for the transfer of data to subsequent video processing decoding or encoding with the TMC22x5y Video Decoder or TMC22x9x Digital Video Encoder family. It also measures the color subcarrier phase and frequency and provides this data to the Encoder (for genlocked color NTSC or PAL encoding), or a Frame buffer (for Frame capture) over the digital composite video port.

Features
• Fully integrated acquisition
• 3-channel video input multiplexer
• Two-stage video clamp
• Automatic gain adjustment
• Sync detection and separation
• Pixel and subpixel adjustment of HSYNC-to-Video timing
• Genlock to NTSC or PAL Inputs
• Clock generation
• 8-bit video A/D converter
• Microprocessor interface
• Line-locked pixel rates
    - 12.27 MHz NTSC
    - 13.5 MHz NTSC or PAL
• Direct interface to TMC22x9x encoders
• Built-in circuitry for crystal oscillator
• No tuning or external voltage reference required
• 68 Lead PLCC or 100 Lead MQFP package

Applications
Frame Grabber
• Digital VCR/VTR
• Desktop video

Part Name(s) : 5305
Pomona Electronics
Pomona Electronics
Description : Breakout: BNC (Female) To SMD Grabber Test Clips

FEATURES:
• Converts BNC (male) cables / Connectors to SMD test clips for test versatility.
Grabber pincer and BNC center contact are gold plated excellent corrosion resistance and low contact resistance to ensure test signal integrity.
• BNC connector is molded directly to the wire for pull strength durability and dust and moisture resistance.
• SMD clips attach to terminals up to .040” (1,0mm) diameter.
• Black wire is connected to BNC shell, red wire to BNC center contact.

Part Name(s) : TDA4864AJ TDA4864J
Philips Electronics
Philips Electronics
Description : Vertical deflection booster

GENERAL DESCRIPTION
The TDA4864J and TDA4864AJ are deflection boosters for use in Vertical deflection systems for Frame frequencies up to 200 Hz.
The TDA4864J needs a separate flyback supply voltage, so the supply voltages are independently adjustable to optimize power consumption and flyback time.

FEATURES
• Power amplifier with differential Inputs
• Output current up to 2.5 A (p-p)
• High Vertical deflection frequency up to 200 Hz
• High linear sawtooth signal amplification
• Flyback generator:
– TDA4864J: separate adjustable flyback supply voltage up to 60 V
– TDA4864AJ: internally doubled supply voltage (two supply voltages only for DC-coupled outputs).

12345678910 Next


All Rights Reserved © qdatasheet.com [ Privacy Policy ] [ Contact Us ]