Qdatasheet_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Searchword :
Part Name(s) : EG2104
Jingjing Microelectronics Co., Ltd
Jingjing Microelectronics Co., Ltd
Description : MOS tube driver chip with SD function

describe
EG2104 is a cost-effective MOS transistor and IGBT transistor gate driver chip with SD ̅̅̅̅ function. Internally integrated logic signal input management circuit, dead time control circuit, level shift circuit, pulse filter circuit and output drive circuit. Dedicated to drive circuits in brushless motor controllers and power supply DCDCs. The high-end working voltage of EG2104 can reach 600V, the low-end Vcc power supply voltage range is 2.8V~20V, and the static power consumption is less than 1uA. The core The chip input channel IN has a built-in 200K pull-down resistor, and SD ̅̅̅̅ has a built-in 200K pull-down resistor. When the input is floating, the upper and lower power MOS The tube is off, the output current capability is IO+/- 1/1.5A, and it is packaged in SOP8.

characteristic
■ High-end suspension bootstrap power supply design, withstand voltage up to 600V
■ Adapt to 5V, 3.3V input voltage
■ The highest frequency supports 500KHZ
■ Low-side VCC voltage range 2.8V-20V
■ Output current capability IO+/- 1A/1.5A
■ Built-in dead zone control circuit
■ SD ̅̅̅̅ input channel active low, close HO, LO output
■ Fewer peripheral devices
■ Quiescent current is less than 1uA, ideal for battery applications
■ Package form: SOP-8

Application field
■ Mobile power high voltage fast charging switching power supply 
■ Wireless charging driver
■ Variable frequency water pump controller
■ DC-DC power supply
■ Brushless motor driver
■ High voltage Class-D amplifier

Part Name(s) : EG2130
Jingjing Microelectronics Co., Ltd
Jingjing Microelectronics Co., Ltd
Description : MOS tube driver chip with SD function

describe
EG2130 is a cost-effective MOS transistor and IGBT transistor gate driver chip with SD ̅̅̅̅ function. Internally integrated logic signal input control circuit, dead-time control circuit, level shift circuit, pulse filter circuit and output drive circuit, specially used for brushless motor controller, power supply Drive circuits in DC-DC.
The high-end working voltage of EG2130 can reach 600V, the low-end Vcc power supply voltage range is 2.8V~20V, and the static power consumption is less than 1uA. The core The chip input channel IN has a built-in 200K pull-down resistor, and SD ̅̅̅̅ has a built-in 200K pull-down resistor. When the input is floating, the upper and lower power MOS The tube is off, the output current capability is IO+/- 1/1.5A, and it is packaged in SOP8.

characteristic
■ High-end suspension bootstrap power supply design, withstand voltage up to 600V
■ Adapt to 5V, 3.3V input voltage
■ The highest frequency supports 500KHZ
■ Low-side VCC voltage range 2.8V-20V
■ Output current capability IO+/- 1A/1.5A
■ Built-in dead zone control circuit
■ The SD ̅̅̅̅ input channel is active low and closes the HO and LO outputs.
■ Fewer peripheral devices
■ Quiescent current is less than 1uA, ideal for battery applications
■ Package form: SOP-8

Application field
■ Mobile power supply high voltage fast charging switching power supply
■ Wireless charging driver
■ Variable frequency water pump controller
■ DC-DC power supply
■ Brushless motor driver
■ High voltage Class-D amplifier

Part Name(s) : EG2104M
Jingjing Microelectronics Co., Ltd
Jingjing Microelectronics Co., Ltd
Description : MOS tube driver chip with SD function

describe
EG2104M is a cost-effective MOS transistor and IGBT transistor gate driver chip with SD function, which integrates logic signal input inside. Processing circuit, dead-time control circuit, level shift circuit, pulse filter circuit and output drive circuit, dedicated to brushless motor controllers, electrical The driver circuit in the source DC-DC.
The high-end working voltage of EG2104M can reach 600V, and the low-end Vcc power supply voltage range is 9V~20V. The chip input channel IN has built-in A 200K pull-down resistor, SD has a built-in 200K pull-down resistor, when the input is floating, the upper and lower power MOS tubes are turned off, and the output Current capability IO+/- 0.3/0.6A in SOP8 package.

characteristic
■ High-end suspension bootstrap power supply design, withstand voltage up to 600V
■ Adapt to 5V, 3.3V input voltage
■ The highest frequency supports 500KHZ
■ VCC and VB terminal power supply with under-voltage protection
■ Low-side VCC voltage range 9V-20V
■ Output current capability IO+/- 0.3 A/0.6A
■ Built-in dead zone control circuit
■ The SD input channel is active low and closes the HO and LO outputs.
■ Fewer peripheral devices
■ Package form: SOP-8

Application field
■ Mobile power supply high voltage fast charging switching power supply
■ Wireless charging driver variable frequency water pump controller
■ DC-DC power supply
■ Brushless motor driver
■ High voltage Class-D amplifier

Part Name(s) : EG2104S
Jingjing Microelectronics Co., Ltd
Jingjing Microelectronics Co., Ltd
Description : MOS tube driver chip with SD function

describe
EG2104S is a cost-effective MOS transistor and IGBT transistor gate driver chip with SD function, which integrates logic signal input inside. Processing circuit, dead-time control circuit, level shift circuit, pulse filter circuit and output drive circuit, dedicated to brushless motor controllers, electrical The driver circuit in the source DC-DC.
The high-end working voltage of EG2104S can reach 600V, and the low-end Vcc power supply voltage range is 9V~20V. The chip input channel IN has built-in A 200K pull-down resistor, SD has a built-in 200K pull-down resistor, when the input is floating, the upper and lower power MOS tubes are turned off, and the output Current capability IO+/- 0.6/1.0A in SOP8 package.

characteristic
■ High-end suspension bootstrap power supply design, withstand voltage up to 600V
■ Adapt to 5V, 3.3V input voltage
■ The highest frequency supports 500KHZ
■ VCC and VB terminal power supply with under-voltage protection
■ Low-side VCC voltage range 9V-20V
■ Output current capability IO+/- 0.6 A/1.0A
■ Built-in dead zone control circuit
■ The SD input channel is active low and closes the HO and LO outputs.
■ Fewer peripheral devices
■ Package form: SOP-8

Application field
■ Mobile power supply high voltage fast charging switching power supply
■ Wireless charging driver variable frequency water pump controller
■ DC-DC power supply
■ Brushless motor driver
■ High voltage Class-D amplifier

Part Name(s) : NJW1326 NJW1326FH2
Japan Radio Corporation
Japan Radio Corporation
Description : Multi Input Wide Band Video Interface with I2C Control

„GENERAL DESCRIPTION  
The NJW1326is a multi input wide band video interface IC with I2C control. Also the NJW1326 includes 3-input 5 channel video switch for SD, 3-input 3 channel video switch for HD, 9 channel 75-ohm driver for SD and 9 channel 75-ohm driver for HD.

„FEATURES
●Operating Voltage  4.5 to 5.5V
●3-input 5 channel video switch for SD
●3-input 3 channel video switch for HD
●9 channel 75-ohm driver for SD
●9 channel 75-ohm driver for HD
●I2C control function
●Bi-CMOS Technology
●Package Outline  LQFP52

Part Name(s) : LV23200T
SANYO -> Panasonic
SANYO -> Panasonic
Description : Bi-CMOS IC For Home Stereo System 1-chip Tuner IC Incorporating PLL

Overview
The LV23200T is a one-chip tuner IC incorporating PLL for home stereo system.

Features
• Tuner IC and PLL IC integrated into one chip.
• MPX-VCO incorporated and without need of adjustment.
• FM/AM output level independent setting possible.
MOS transistor for active LPF incorporated.

Functions
• AM tuner Changeover of the constant in RFAMP, MIX, OSC, IF AMP,
   DET, AGC, SD, OSC BUFF, IF BUFF, and AGC modes.
• FM tuner 1stIFAMP, IF limiter AMP, DET (COIL type) , S-METER, SD, AFC, IF BUFF.
• MPX PLL STEREO DECODER, forced MONO, AUDIO MUTE, function to prevent
   interference from a neighboring station, PILOT canceling function.
• PLL frequency synthesizer.

NEC => Renesas Technology
NEC => Renesas Technology
Description : 4-BIT SINGLE-chip MICROCOMPUTER

DESCRIPTION
The µPD75206 is a microcomputer with a CPU capable of 1-, 4-, and 8-bit-wise data processing, a ROM, a RAM, I/O ports, a fluorescent display tube controller/driver, a watch timer, a timer/pulse generator capable of outputting 14-bit PWM, a serial interface and a vectored interrupt function integrated on a single-chip.
It uses the VCR, ECR and CD fluorescent display tubes as display devices and is MOSt suitable for applications requiring the timer/watch function and high-speed interrupt servicing. It can help to provide the unit with many functions and to decrease performance costs.
with the µPD75206, the µPD75P216A, 75P218 one-time PROM products are available for system development evaluation or small production.

FEATURES
• Architecture equal to that of an 8-bit microcomputer
• High-speed operation : Minimum instruction execution time : 0.95 µs (when operated at 4.19 MHz)
• Instruction execution time variable function realizing a wide range of operating voltages
• On-chip large-capacity program memory : 6K bytes
• Watch operation with an ultra low current consumption : 5µA TYP. (at the 3 V operation)
• On-chip programmable fluorescent display tube controller/driver
• Timer function : 4 ch
   • 14-bit PWM output capability with the voltage synthesizer type electronic tuner
   • Buzzer output capability
• Interrupt function with importance attached to applications
   • For power-off detection
   • For remote controlled reception
• Product with an on-chip PROM : µPD75P216A, µPD75P218 (on-chip EPROM : WQFN package)

Part Name(s) : LA1837M
SANYO -> Panasonic
SANYO -> Panasonic
Description : Monolithic Linear IC Single-chip AM/FM Tuner IC for Home Stereo Systems

Overview
The LA1837M is a single-chip AM/FM tuner IC that provides AM and FM IF and multiplex decoding circuits for electronic tuning and was developed for use in home stereo systems. It provides both SD and IF counting techniques for optimal implementation of automatic station selection.

Features
• On-chip MPX VCO circuit (no external components required).
• Adjacent channel interference rejection function (third order and fifth order).
• Supports both the SD and IF counting technique (built-in SD speedup function).
• The AM and FM SD sensitivity can be set independently.
• The AM and FM output levels can be set independently.
• Improved basic FM reception performance.

Functions
• AM: RF amplifier, mixer, oscillator, IF amplifier, detector, AGC, oscillator buffer, S-meter, narrow band SD, IF buffer
• FM IF: IF amplifier, quadrature detector, S-meter, SD, S curve detection, IF buffer output
• Multiplex stereo decoding: PLL stereo decoder, stereo indicator, forced monaural, VCO stop function, post amplifier, audio muting, adjacent channel interference rejection function

Part Name(s) : LA1837M
ON Semiconductor
ON Semiconductor
Description : Single-chip AM/FM Tuner IC for Home Stereo Systems

Overview
The LA1837M is a single-chip AM/FM tuner IC that provides AM and FM IF and multiplex decoding circuits for electronic tuning and was developed for use in home stereo systems. It provides both SD and IF counting techniques for optimal implementation of automatic station selection.

Features
• On-chip MPX VCO circuit (no external components required).
• Adjacent channel interference rejection function (third order and fifth order).
• Supports both the SD and IF counting technique (built-in SD speedup function).
• The AM and FM SD sensitivity can be set independently.
• The AM and FM output levels can be set independently.
• Improved basic FM reception performance.

Functions
• AM: RF amplifier, mixer, oscillator, IF amplifier, detector, AGC, oscillator buffer, S-meter, narrow band SD, IF buffer
• FM IF: IF amplifier, quadrature detector, S-meter, SD, S curve detection, IF buffer output
• Multiplex stereo decoding: PLL stereo decoder, stereo indicator, forced monaural, VCO stop function, post amplifier, audio muting, adjacent channel interference rejection function

NEC => Renesas Technology
NEC => Renesas Technology
Description : 4-BIT SINGLE-chip MICROCOMPUTER

DESCRIPTION
The µPD75216A is a microcomputer with a CPU capable of 1-, 4-, and 8-bit data processing, ROM, RAM, I/O ports, a fluorescent display tube controller/driver, a watch timer, a timer/pulse generator capable of outputting 14-bit PWM, a serial interface and a vectored interrupt function integrated on a single-chip.
The µPD75216A is a product with the ROM capacity and the number of display segments extended for the µPD75208.
It uses the VCR, ECR and CD fluorescent display tubes as display devices and is MOSt suitable for applications requiring the timer/watch function and high-speed interrupt servicing. It can help to provide the unit with many functions and to decrease performance costs.

FEATURES
• Architecture equal to that of an 8-bit microcomputer
• High-speed operation : Minimum instruction execution time : 0.95 µs (when operated at 4.19 MHz)
• Instruction execution time variable function realizing a wide range of operating voltages
• On-chip large-capacity program memory : 16K bytes
• Watch operation with an ultra low current consumption : 5µA TYP. (at the 3 V operation)
• On-chip programmable fluorescent display tube controller/driver
• Timer function : 4 ch
   • 14-bit PWM output capability with the voltage synthesizer type electronic tuner
   • Buzzer output capability
• Interrupt function with importance attached to applications
   • For power-off detection
   • For remote controlled reception
• Product with an on-chip PROM : µPD75P216A, µPD75P218 (on-chip EPROM : WQFN package)

APPLICATION FIELD
   VCR, CD player, ECR, etc.

12345678910 Next


All Rights Reserved © qdatasheet.com [ Privacy Policy ] [ Contact Us ]