Qdatasheet_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Searchword :
Description : 1 Watt SIP7 Single and Dual Output

Description
The RP series has very high isolation of 5.2kVDC in a compact size. The converters are suitable for IGBT driver applications. The /X2 version has rearranged pins to permit an input output separation of more than 9mm.

Features
Unregulated Converters
• Pot-core transformer - separated windings
• high 5.2kVDC/1s basic isolation in compact size
• Optional continuous short circuit protection
• Effciency up to 82%
• Pin compatible with RH and RK series
• Suitable for IGBT applications
• IEC/EN/UL/CSA 60950-1 certifed

Description : 128 Kbit, 64 Kbit and 32 Kbit serial I²C bus EEPROM

Description
The M24C32, M24C64 and M24128 devices are I2C-compatible electrically erasable programmable memories (EEPROM). They are organized as 4096 × 8 bits, 8192 × 8 bits and 16384 × 8 bits, respectively.

Features
■ Two-wire I2C serial interface supports 400 kHz protocol
■ Single supply voltages (see Table 1 for root part numbers):
   – 2.5 V to 5.5 V
   – 1.8 V to 5.5 V
   – 1.7 V to 5.5 V
■ Write Control input
■ Byte and Page Write
■ Random and Sequential Read modes
■ Self-timed programming cycle
■ Automatic address incrementing
■ Enhanced ESD/latch-up protection
■ More than 1 Million write cycles
■ More than 40-year data retention
■ Packages
   – ECOPACK® (RoHS compliant)

Description : 64-Kbit serial I²C bus EEPROM

The M24C64 is a 64-Kbit I2C-compatible EEPROM (Electrically Erasable PROgrammable Memory) organized as 8 K × 8 bits. Over an ambient temperature range of -40 °C / +85 °C, the M24C64-W can operate with a supply voltage from 2.5 V to 5.5 V, the M24C64-R can operate with a supply voltage from 1.8 V to 5.5 V, and the M24C64-F and M24C64-DF can operate with a supply voltage from 1.7 V to 5.5 V ( the M24C64-F can also operate down to 1.6 V, under some restricting conditions).The M24C64-D offers an additional page, named the Identification Page (32 bytes). The Identification Page can be used to store sensitive application parameters which can be (later) permanently locked in Read-only mode.

Features
• Compatible with all I2C bus modes:
   –1 MHz
   – 400 kHz
   – 100 kHz
• Memory array:
   – 64 Kbit (8 Kbytes) of EEPROM
   – Page size: 32 bytes
   – Additional Write lockable page(M24C64-D order codes)
• Single supply voltage:
   – 1.7 V to 5.5 V over –40 °C / +85 °C
   – 1.6 V to 5.5 V over 0 °C / +85 °C
• Write:
   – Byte Write within 5 ms
   – Page Write within 5 ms
• Random and sequential Read modes
• Write protect of the whole memory array
• Enhanced ESD/Latch-Up protection
• More than 4 million Write cycles
• More than 200-year data retention Packages

Description : VOLTAGE DETECTORS WITH BUILT-IN DELAY TIME

DESCRIPTION
The UTC 81CXXX and 81NXXX series are good performance voltage detector and manufactured by CMOS technologies with highly accurate, low power consumption. A delay circuit is built-in to each detector, therefore, peripherals are unnecessary and high density mounting is possible. Detect voltage is extremely accurate with minimal temperature drift. Both CMOS and N-channel open drain output configurations are available.

FEATURES
* Highly Accurate: Detect voltage ± 2%
* Built-In Delay time : 1ms ~ 50ms
                                   50ms ~ 200ms
                                   200ms ~ 400ms
* Detect Voltage Temperature Characteristics: TYP± 100ppm/°C
* Wide Operating Voltage Range : 0.7V ~ 10.0V
* Low Current Consumption : TYP 1.0μA (VIN=2.0V)

Description : Miniature Industrial Relays

Features
• Miniature Industrial Relays
• Large Capacity 5A
• 1. 2. 3 and 4 poles

 

Description : 128 Kbit, 64 Kbit and 32 Kbit serial I²C bus EEPROM

Description
The M24C32, M24C64 and M24128 devices are I2C-compatible electrically erasable programmable memories (EEPROM). They are organized as 4096 × 8 bits, 8192 × 8 bits and 16384 × 8 bits, respectively.

Features
■ Two-wire I2C serial interface supports 400 kHz protocol
■ Single supply voltages (see Table 1 for root part numbers):
   – 2.5 V to 5.5 V
   – 1.8 V to 5.5 V
   – 1.7 V to 5.5 V
■ Write Control input
■ Byte and Page Write
■ Random and Sequential Read modes
■ Self-timed programming cycle
■ Automatic address incrementing
■ Enhanced ESD/latch-up protection
■ More than 1 Million write cycles
■ More than 40-year data retention
■ Packages
   – ECOPACK® (RoHS compliant)

Description : ECONOLINE DC/DC-Converter

ECONOLINE DC/DC-Converter

1 Watt SIP4 & SIP7 Single Output

Features
Unregulated Converters
● Industry Standard Pinout
● 1kVDC & 2kVDC Isolation
● UL94V-0 Package Material
● Toroidal Magnetics
● Fully Encapsulated
● Custom Solutions Available
● Efficiency to 85%

Description : Complementary Output Hall Effect Latch

General Description
ATS276/277 are integrated Hall sensors with output drivers, mainly designed for electronic commutation of brush-less DC Fan. This IC internally includes the regulator, protecting diode, Hall plate, amplifier, comparator, and a pair of complementary open-collector outputs (DO, DOB).

Features
- On-chip Hall sensor with two different sensitivity and hysteresis settings for ATS276/277
- 3.5V to 20V operating voltage
- 400mA (avg) output sink current 
- Build-in protecting diode only for chip reverse power connecting
--20°C to 85°C operating temperature
- Low profile 4 pin SIP package

Applications
- Dual-coil Brush-less DC Motor
- Dual-coil Brush-less DC Fan
- Revolution Counting
- Speed Measurement

Description : 2 Watt SMD Single & Dual Output

[RECOM]

ECONOLINE DC/DC-Converter

Description
The R2S and R2D converters are of the enclosed open frame type, meaning that they are unpotted. The converters are typically used in general purpose and industrial low power isolation and voltage matching applications where an SMD converter is required. The converter series feature an extended ambient temperature operating range of -40°C ~ +100°C without derating and optional continuous short circuit protection. In addition to two isolation options and three different case formats, the converters are also available prepacked as tape and reel for use with automatic insertion machines.

Features
Unregulated Converters
● Fully RoHS 6/6 Conform
● Full Power at 100°C Ambient Temperature
● 1kVDC and 3kVDC Isolation Options
● /H Version Certified for Medical Applications
● UL/EN/CSA Certified, CB Report
● Suitable for Fully Automated Assembly
   (including Vapour Phase Soldering)
● Optional Continuous Short Circuit Protection
● Efficiency to 85%

Description : 2 Watt SMD Single & Dual Output

ECONOLINE DC/DC-Converter

Description
The R2S and R2D converters are of the enclosed open frame type, meaning that they are unpotted. The converters are typically used in general purpose and industrial low power isolation and voltage matching applications where an SMD converter is required. The converter series feature an extended ambient temperature operating range of -40°C ~ +100°C without derating and optional continuous short circuit protection. In addition to two isolation options and three different case formats, the converters are also available prepacked as tape and reel for use with automatic insertion machines.

Features
Unregulated Converters
● Fully RoHS 6/6 Conform
● Full Power at 100°C Ambient Temperature
● 1kVDC and 3kVDC Isolation Options
● /H Version Certified for Medical Applications
● UL/EN/CSA Certified, CB Report
● Suitable for Fully Automated Assembly
   (including Vapour Phase Soldering)
● Optional Continuous Short Circuit Protection
● Efficiency to 85%

12345678910 Next


All Rights Reserved © qdatasheet.com [ Privacy Policy ] [ Contact Us ]