P/N + Description + Content Search

Photo IC FOR Photo INTERRUPTER

PhotoELECTRIC COUNTER
POSITION AND ROTATIONAL SPEED SENSOR

TOSHIBA/666760-DI1.png" data-cke-saved-src="//www.qdatasheet.com/contents-image1/TOSHIBA/666760-DI1.png">

PhotoELECTRIC SWITCHES
COPIES, PRINTERS, AND FACSIMILES
COMMODITY AND TICKET BENDING MACHINES AND TERMINAL EQUIPMENT IN FINANCIAL COMPUTER SYSTEMS
HANDY TERMINALS

The TPS811 and TPS813 represent a Si Photo IC of digital output type that integrates a Photodiode, amplifier circuit, and Schmitt trigger circuit into a single chip.
These devices respond faster than the Phototransistor type. They output a high when light is input.

TOSHIBA/666761-DI1.png" data-cke-saved-src="//www.qdatasheet.com/contents-image1/TOSHIBA/666761-DI1.png">

Lead(Pb)-Free
Luminosity Adjustment for TV Screens, CRT Monitors and Liquid-crystal Display Monitors
Other Equipment Requiring Luminosity Adjustment

The TPS855(F) is a linear-output Photo-IC which incorporates a Photodiode and a current amp circuit in a single chip. This Photo-IC is current output type, so can set up output voltage freely by arbitrary load resistance.

• High sensitivity :IL = 280 μA (typ.)
                            @EV = 100 lx Using the fluorescent light
• Little fluctuation in light current : 1.67 times width ( ±25% typ.)
• Excellent illumination output linearity
• Open-emitter output
• Side-view package
• Environmentally friendly Silicon used as chip material instead of CdS
   Suitable as a substitute for CdS-based products

Mobile Phones, PHS, Pagers
Notebook PCs, PDAs
Cameras
Other Equipment Requiring Luminosity Adjustment

The TPS819 is a linear-output Photo-IC which incorporates a Photodiode and a current amp circuit in a single chip. This Photo-IC also incorporates a luminous-efficiency correction filter, so output value is close to luminosity characteristics.

• High sensitivity : IL = 50~100 µA
                             @EV = 100 lx λp = 522 nm LED
• Luminous efficiency correction filter mounted on detector
                       : λp = 550 nm (typ.)
• Open-emitter output
• Compact and light surface-mount package

Lead(Pb)-Free
Photo-electric Switches
Office Equipment such as Photocopiers, Printers and Fax Machines

The TPS816(F) is an Si Photo-IC for digital output. It incorporates a Photodiode, amp, waveform shaper, LED driver and sync detector in a single chip. Use of sync optical modulation makes the IC ideal for applications in external light.

• Housed in compact side-view epoxy resin package
• High resistance to external light due to sync optical modulation: EX = 3000 lx (min)
• High-sensitivity: EHL = 1 μW/mm2 (max)
• Wide operating temperature range: Topr = −30°C to 85°C
• High LED output current and low-level output current:
   ILED = 70 mA (Ta = Topr)
   IOL = 16 mA (Ta = Topr)
• Digital output (pull-up resistor included) : Low-level output for light input
• TPS816(F) package resin impermeable to visible light

FOR Photo SENSOR

PhotoELECTRIC COUNTER
FLOPPY DISK DRIVE
POSITION DETECTION
CONTROLLER OF HOME ELECTRIC EQUIPMENT

TOSHIBA/665374-DI1.png" data-cke-saved-src="//www.qdatasheet.com/contents-image1/TOSHIBA/665374-DI1.png">

○ Flat Panel Displays
○ Mobile Phones
○ Notebook PCs, PDAs
○ Video cameras, Digital Still Cameras
○ Other Equipment Requiring Luminosity Adjustment

The TPS859 is an ultra-compact surface-mount Photo-IC for illuminance sensors which incorporates a Photodiode and current amp circuit in a single chip.The sensitivity is superior to that of a Phototransistor, and exhibits little variation.
It has spectral sensitivity closer to luminous efficiency and excellent output linearity.
With its ultra-compact surface-mount package, this Photo-IC can be used as the power-saving control for domestic appliances or for backlighting for displays in cellular phones, this device enables low power consumption to be achieved.

• Ultra-compact and light surface-mount package : 1.6 mm× 1.6 mm × 0.55 mm
• Excellent output linearity of illuminance
• Little fluctuation in light current and high level of sensitivity : IL = 230 μA (typ.) @EV = 100 lx using fluorescent light : Light current variation width: × 1.67 ( When light current classification is specified.) : Little temperature fluctuation
• Built-in luminous-efficiency correction function, reduced sensitivity variations due to various light sources : IL (using incandescent light)/IL (using fluorescent light) = 1.0 (typ.)
• Low supply voltage, making device suitable for battery-powered equipment: VCC = 1.8 V to 5.5 VA

Mobile Phones
Notebook PCs, PDAs
Video cameras, Digital Still Cameras
Other Equipment Requiring Luminosity Adjustment

The TPS852 is an ultra-compact surface-mount Photo-IC for illuminance sensors which incorporates a Photodiode and current amp circuit in a single chip.
The sensitivity is superior to that of a Phototransistor, and exhibits little variation.
It has spectral sensitivity closer to luminous efficiency and excellent output linearity.
With its ultra-compact surface-mount package, this Photo-IC can be used as the power-saving control for domestic appliances or for backlighting for displays in cellular phones, this device enables low power consumption to be achieved.

• Ultra-compact and light surface-mount package: 1.6 × 1.6 × 0.55 mm
• Excellent output linearity of illuminance
• Little fluctuation in light current and high level of sensitivity
   : IL = 40 μA (typ.) @EV = 100 lx using fluorescent light
   : Light current variation width: ×1.67 (when light current classification is specified.)
   : Little temperature fluctuation
• Built-in luminous-efficiency correction function, reduced sensitivity variations due to various light sources
   : IL (using incandescent light)/IL (using fluorescent light) = 1.2 (typ.)
• Low supply voltage, making device suitable for battery-powered equipment: VCC = 2.7 V to 5.5 V
• Lead(Pb)-Free

Mobile Phones
Notebook PCs, PDAs
Video cameras, Digital Still Cameras
Other Equipment Requiring Luminosity Adjustment

The TPS856 is an ultra-compact surface-mount Photo-IC for illuminance sensors which incorporates a Photodiode and current amp circuit in a single chip.
The sensitivity is superior to that of a Phototransistor, and exhibits little variation.
It has spectral sensitivity closer to luminous efficiency and excellent output linearity.
With its ultra-compact surface-mount package, this Photo-IC can be used as the power-saving control for domestic appliances or for backlighting for displays in cellular phones, this device enables low power consumption to be achieved.
This device includes stand-by function which can reduce the power consumption.

• Ultra-compact and light surface-mount package: 1.6 × 1.6 × 0.55 mm
• Excellent output linearity of illuminance
• Little fluctuation in light current and high level of sensitivity
   : IL = 57 μA (typ.) @EV = 100 lx using fluorescent light
   : Light current variation width: × 1.67 ( When light current classification is specified.)
   : Little temperature fluctuation
• Built-in luminous-efficiency correction function, reduced sensitivity variations due to various light sources
   : IL (using incandescent light)/IL (using fluorescent light) = 1.0 (typ.)
• Low supply voltage, making device suitable for battery-powered equipment: VCC = 1.8 V to 5.5 V
• Lead(Pb)-Free

Mobile Phones, PHS, Pagers
Notebook PCs, PDAs
Video Cameras, Digital Still Cameras
Other Equipment Requiring Luminosity Adjustment

The TPS850 is a linear-output Photo-IC which incorporates a Photodiode and a current amp circuit in a single chip. This Photo-IC is current output type, so can set up output voltage freely by arbitrary load resistance.

• High sensitivity: IL = 230 µA
   @EV = 100 lx (typ.) Using the fluorescent light
• Little fluctuation in light current
   : Width range = x1 to x1.6 (typ. ±25%)
• Output linearity of illuminance is excellent
• Open-emitter output
• Compact and light surface-mount package
• Pb-free