P/N + Description + Content Search

TWIN SENSOR WATER TREATMENT SYSTEM
24/7 FLOW OF CONDITIONED WATER

The Pentair 9100TS WATER TREATMENT SYSTEM provides a 24/7 flow of conditioned WATER. The SYSTEM’s dual SENSORs measure the conductivity of the resin bed to determine the true softening capacity. This advanced technology ensures the SYSTEM provides 100% of its TREATMENT capacity before regenerating. The 9100TS pairs the superior valve design of Pentair and the sophisticated Logix controller electronics for unrivaled performance and dependability.

FEATURES/BENEFITS
   Salt and WATER savings by using 100%
   capacity of the tank in service before
   switching to the second tank

   Dual SENSOR that reads varying
   shifts in hardness and adjusts valve
   settings for optimal performance and
   savings

   Regenerates immediately when
   needed for continuous soft WATER

   Regenerates with soft WATER and
   keeps SYSTEM clean for optimum
   operating efficiency and minimum
   maintenance

   Proven technology and performance

   Corrosion-free fiber-reinforced
   polymer valve body

   LOGIX timer

   Perfect for light commerical/heavy
   residential SYSTEMs that require TWIN
   tank conditioning capabilities

   Upflow brining for improved
   TREATMENT capacity

DESCRIPTION
Miniature insulated chip NTC thermistor mounted in a stainless steel housing with brass collar for sealed mounting and TWIN PVC isulated AWG#30 lead wire connection.

FEATURES
• Fast time response for fluid immersion
   applications
• Reduced thermal gradient, due to the use of
   small tip dimensions and thin isulated wire
• SENSOR for permanent contact with WATER or
   other liquids
• Compliant to RoHS Directive 2002/95/EC

APPLICATIONS
Immersion SENSOR used for temperature measurement,
sensing and control in:
• WATER boilers
• Heating SYSTEMs
• Chiller SYSTEMs
• WATER and used WATER SYSTEMs
• WATER and oil tanks
• Consumer appliances, Coffee machines
• Industrial appliances
• Solar heating SYSTEMs

DESCRIPTION
Miniature insulated chip NTC thermistor mounted in a SS304 housing with or without brass collar for sealed mounting and TWIN PVC insulated AWG#30 lead wire connection.

FEATURES
• Fast time response for fluid immersion
   applications
• Reduced thermal gradient, due to the use of
   small tip dimensions and thin insulated wire
• SENSOR for permanent contact with WATER or
   other liquids
• Material categorization: for definitions of
   compliance please see www.vishay.com/doc?99912

APPLICATIONS
Immersion SENSOR used for temperature measurement,
sensing and control in:
• WATER boilers
• Heating SYSTEMs
• Chiller SYSTEMs
• WATER and used WATER SYSTEMs
• WATER and oil tanks
• Consumer appliances, coffee machines
• Industrial appliances
• Solar heating SYSTEMs

DESCRIPTION
Miniature insulated chip NTC thermistor mounted in a SS304 housing with or without brass collar for sealed mounting and TWIN PVC insulated AWG#30 lead wire connection.

FEATURES
• Fast time response for fluid immersion
   applications
• Reduced thermal gradient, due to the use of
   small tip dimensions and thin insulated wire
• SENSOR for permanent contact with WATER or
   other liquids
• Material categorization: for definitions of
   compliance please see www.vishay.com/doc?99912

APPLICATIONS
Immersion SENSOR used for temperature measurement,
sensing and control in:
• WATER boilers
• Heating SYSTEMs
• Chiller SYSTEMs
• WATER and used WATER SYSTEMs
• WATER and oil tanks
• Consumer appliances, Coffee machines
• Industrial appliances
• Solar heating SYSTEMs

VERTICAL LIQUID LEVEL SWITCHES VS Series

The VS series of point liquid level switches demonstrates a high degree of reliability due to the use of non-reactive wetted components and a unique reed switch designed specifically for level sensing applications. The SENSOR utilizes a moving float with an embedded magnet to activate a reed switch located in the SENSOR body. As the liquid level raises the float, it moves into close proximity to the reed switch and actuates it to give an open contact or closed contact switch indication.

Features
• Voltage rating up to 250VAC
• Current rating up to 1.0 amp
• Compact design and low profile
• Optional cable lengths
• Includes mounting hardware

Applications
• WATER and fuel storage tanks
• Full and/or empty detection
• Pump on/off controls
• Marine bilge and ballast tanks
• Flood detection and prevention
• Coolant level indication
• Livestock WATERing tanks
• Irrigation SYSTEMs
• WATER TREATMENT plants
• Waste WATER tanks

Features
● Isolation between WATER and electrical connections with Direct copper bonded Al2O3-ceramic
● Planar passivated chips
● Isolation voltage 3600 V~
● Keyed gate/cathode TWIN pins

Applications
● Large resistance welding equipment
● Large electroplating equipment

[NOBAC]

NOBAC DC 9325 is added to an oil/gas production or transmission line via direct injection. The application is conducted to ensure maximum distribution of this product throughout the entire internal pipeline surface by adding a sufficient amount of biocide to detect/measure a residual concentration at the back end of the pipeline SYSTEM. Criteria for success of the TREATMENT will be a reduction in bacterial counts and/or reduced corrosion rates. To facilitate application, it may be desirable to dilute NOBAC DC 9325 with an appropriate solvent immediately before use. The concentration in the solvent must not fall below an active concentration range of 500 to 5,000 ppm based on the volume of WATER in the pipeline. Injections to the SYSTEM are made weekly, or as needed to maintain control.

Detects WATER...reliably!

Strong penetration power
As the penetration power is strong, its beam can pass
through not only translucent containers (PFA tanks, etc.)
but also opaque containers of shampoo bottles, etc., and
can reliably detect the liquid inside.

Adjacent SENSOR mounting possible
Several SENSORs can be mounted adjacently by fitting
optional slit masks. Further, they can detect the liquid
level accurately.

Not affected by drops, bubbles or froth
It is possible to set its sensitivity adjuster so that WATER
drops, bubbles in the WATER, or froth on the WATER surface
are not detected.

IP67 protection
The SENSOR can be hosed down because of its IP67
construction and the non-corrosive stainless steel SENSOR
mounting bracket.

Plug-in connector type is available
Plug-in connector type which enables connection /
disconnection of the cable by one-touch is available.
Anyone can easily replace the SENSOR in a minute.

Turbidity SENSOR

The TST-10 module measures the turbidity (amount of suspended particles) of the wash WATER in washing machines and dishwashers. An optical SENSOR for washing machines is a measuring product for a turbid WATER density or an extraneous matter concentration using the refraction of wavelength between photo transistor and diode. By using an optical transistor and optical diodes, an optical washing machine SENSOR measures the amount of light coming from the source of the light to the light receiver, in order to calculate WATER turbidity.

Features
• Fast-axis collimated radiation
• Laser bar mounted on passive mount, no WATER
   required
• For quasi continuous wave (qcw) operation
• Highly reliable semiconductor material with
   minimum life time of 10,000 h,
   typically >50,000 h
• Low thermal resistance
• Low smile (< 2.5 μm) and low mechanical
   tolerances

Applications
• Pumping of solid state lasers
• Direct industrial applications (soldering, surface
   treatment,…)
• Medical applications
• Printing applications