Description The device CMOS Dynamic RAM organized as 4,194,304 words x 4 bits with extended data out access mode. It is fabricated with an advanced submicron CMOS technology and designed to operate from a single 3.3V oniy power supply. Low VOLTAGE operation is more suitable to be used on battery backup, portable elec tronic application. lt is packaged in JEDEC standard 26/24-pin plastic SOJ or TSOP(II).
Features • Single 3.3V(±10%) only power supply • High speed tRAC acess time: 50/60ns • Low power dissipation - Active mode : 432/396 mW (Mas) - Standby mode: 0.54 mW (Mas) • Extended - data - out(EDO) page mode access • I/O level: CMOS level (Vcc = 3.3V) • 2048 refresh cycle in 32 ms(Std.) or 128 ms(S-version) • 4 refresh modesh: - RAS only refresh - CAS - before - RAS refresh - Hidden refresh - Self-refresh(S-version)
FEATURES 1. Economical prices achieved 2. Useful for wide range of applications Gold-plated contact types are capable of switching under low level (1mA: reference value) to powerful high level (7A: 2-pole) loads. 3. Wide range of types available The lineup includes 2-pole and 4-pole products, relays with operating indicator lights, and push-button types. You will also find relays that absorb surge when the coil goes to the off state with diodes (for DC type) or CR circuits (for AC type). Moreover, the availability of a broad range of coil VOLTAGEs meets a wide range of needs. 4. Coil cutoff detection The LED that is fitted to AC coils goes off when the coil is inoperative and so provides a cutoff detection function. 5. Finger protection Terminal sockets with finger protection, designed to prevent fingers from touching the terminals, are also available. 6. Sockets and terminal sockets are available.
TYPICAL APPLICATIONS Control panels Power supply units Molding machines Machine tools Welding equipment Agricultural equipment Office equipment Vending machines Communications equipment Amusement machines
• Large switching capacity up to 40A
• Small size and light weight
• PCB pin and quick connect mounting available
• Suitable for automobile and lamp accessories
• QS-9000, ISO-9002 Certified Manufacturing
The DLV (Dual Low VOLTAGE) Series from DATEL provides both digital I/O and core logic supply VOLTAGEs from a single 2" x 2" industry-standard pinout, plastic package.
Features ■ Two independently regulated outputs: 3.3V @ 6A; 2.5V, 1.8V, 1.5V or 1.2V @ 7A ■ 30 Watts total output power Available input VOLTAGE ranges: ■ 10-18V, 18-36V or 36-75V ■ Independent output VOLTAGE adjustment ■ Remote On/Off Control ■ Synchronous rectifier; No load operation ■ 2" x 2" package; Industry standard pinout ■ IEC950/UL60950/EN60950 certified ■ CE mark available (75VIN models) ■ Input under and overVOLTAGE shutdown ■ Output overVOLTAGE protection ■ Thermal shutdown ■ Fully Isolated (1500Vdc)
■ Features, Benefits and Applications ■ MEMS oscillator with LVCMOS/LVTTL compatible output ■ 1-110 MHz frequency range ■ Frequency stability as low as ±20 PPM ■ Typical current consumption of 6.1 mA in active mode ■ Standby or output enable modes ■ 1.8V, 2.5V - 3.3V supply VOLTAGE ■ SoftEdgeTM configurable rise/fall time for driving higher loads or EMI reduction. ■ Four industry-standard packages: 2.5 x 2.0, 3.2 x 2.5, 5.0 x 3.2, 7.0 x 5.0 mm ■ All-silicon device with outstanding reliability of 2 FIT, 10x improvement over quartz-based devices ■ Ultra short lead time ■ Ideal for consumer electronics: video, set top boxes, HDTV, DVR, scanners, printers, IP camera, etc. ■ Ideal for high-speed serial protocols: Ethernet, USB, SATA, SAS, Fibre Channel, Firewire, PCI Express
Special Features • 2.3” x 0.9” Industry Standard 8th brick outline • Baseplate or Openframe construction • Low Ripple and Noise • Regulation to zero load • High Capacitive Load start-up • Fixed Frequency Switching for EMI predictability • Industry Standard features: Input UVLO with hysteresis, Enable, OVP, OCP, OTP, Output VOLTAGETrim, Differential Remote Sense • Meets Basic Insulation • EU Directive 2002/95/EC compliant for RoHS
Introduction APRIL 2004. This edition of Memory Spectrum has been developed to enable you to easily view the entire range of Infineon’s memory products. For more related product information and the latest datasheets, please visit our websites: www.infineon.com/memory and www.infineon.com/memory/flash.
■ DDR400 Components and DIMMs (PC3200) ■ 2 GB DDR2 Unbuffered DIMM ■ 4 GB DDR2 Registered DIMM ■ 16 Mb and 32 Mb CellularRAM ■ 512 Mb Mobile-RAM ■ “Green**”, DRAM Components and Modules ■ 512 Mb and 1 Gb TwinNAND Components ■ SD Cards / MultiMediaCards