Qdatasheet_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Searchword :
NTE-Electronic
NTE Electronics
Description : Light Emitting Diode (LED)

Description:
The NTE3020 through NTE3024 LEDs offer a variety of lens effects and color availability. The Red (NTE3020) source color device is made with Gallium Arsenide Phosphide on Gallium Arsenide Red Light Emitting Diode. The High Efficiency Red (NTE3022) and Orange (NTE3023) source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode.
The Green (NTE3024) source color device device is made with Gallium Phosphide on Gallium Phosphide Green Light Emitting Diode. The Yellow (NTE3021) source color device is made with Gallium Arside Phosphide on Gallium Phosphide Yellow Light Emitting Diode.

Features:
• Low Power Consumption
• High Efficiency
• IC Compatible/Low Current Requirements
• Versatile mounting on P.C. board or panel
• Reliable and Rugged

 

Part Name(s) : L-1043
Kingbright
Kingbright
Description : 3.65x6.15mm SINGLE CHIP LED Light BARS

Description
The High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode.
The Green and Super Bright Green source color devices are made with Gallium Phosphide Green Light Emitting Diode.
The Yellow source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode.
The Super Bright Red source color devices are made with Gallium Aluminum Arsenide Red Light Emitting Diode.

Features
● FLAT RECTANGULAR Light Emitting SURFACE.
● IDEAL AS FLUSH MOUNTED PANEL INDICATORS.
● EXCELLENT ON/OFF CONTRAST.
● LONG LIFE - SOLID STATE RELIABILITY.

Description : LED Light BARS

Description
The Super Bright Green source color devices are made with Gallium Phosphide Green Light Emitting Diode.
The Orange source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode.
The Yellow source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode.
The Super Bright Red source color devices are made with Gallium Aluminum Arsenide Red Light Emitting Diode.

Features
● UNIFORM Light Emitting AREA.
● LOW CURRENT OPERATION.
● EASILY MOUNTED ON P.C. BOARDS.
● FLUSH MOUNTABLE.
● EXCELLENT ON/OFF CONTRAST.
● CAN BE USED WITH PANELS AND LEGEND MOUNTS.
● CATEGORIZED FOR LUMINOUS INTENSITY, YELLOW AND GREEN CATEGORIZED FOR COLOR.

Description : 3.65x6.15mm SINGLE CHIP LED Light BARS

Description
The High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode.
The Green and Super Bright Green source color devices are made with Gallium Phosphide Green Light Emitting Diode.
The Yellow source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode.
The Super Bright Red source color devices are made with Gallium Aluminum Arsenide Red Light Emitting Diode.

Features
● FLAT RECTANGULAR Light Emitting SURFACE.
● IDEAL AS FLUSH MOUNTED PANEL INDICATORS.
● EXCELLENT ON/OFF CONTRAST.
● LONG LIFE - SOLID STATE RELIABILITY.

Part Name(s) : KLB-16WC
Kodenshi
Kodenshi Auk Co., LTD
Description : White Light Emitting Diode(InGaN)

White Light Emitting Diode(InGaN)

KLB-16W is a high bright InGaN White LED whitout using phorsphor.

Features
• Ultra Wide Viewing Angle
• Very Thin Small SMD Package
• Single Chip White LED without Phospor

Applications
• Display
• Indicator
• Key Pad Back Light

Part Name(s) : KLC-50WC
Kodenshi
Kodenshi Auk Co., LTD
Description : White Light Emitting Diode(InGaN)

White Light Emitting Diode(InGaN)

KLC-50W is a high bright InGaN White LED whitout using phorsphor.

Features
• Ultra Wide Viewing Angle
• Very Thin Small SMD Package
• Single Chip White LED without Phospor

Applications
• Display
• Indicator
• Key Pad Back Light

Part Name(s) : 515-1033
Dialight
Dialight Corporation
Description : 3.2mm Round MicroLED® Optopipe® Optical Light Pipe, 2 Array, Panel Mounted

DiaLight Optopipe® Light Pipe Description
This Optopipe® is clamped to the inside of the plastic panel. The Light pipe is not attached to the PCB at any point but floats in front of it. The splines on the tubular section on the right hand side hold the Light pipe in place for the clamping operation. The funnel end faces the Light source. The tubular sections fit through the plastic panel. The Light Emitting surface is textured to diffuse the Light passing through it. The Light source can be any super-bright 2mm, 3mm, or 5mm LED, or one of DiaLight’s 597 Series SMT LEDs. The Light source’s Emitting surface should be located no more than 0.020" or 0.5mm from the Optopipe®. The Light sources are mounted in a straight line facing the rear of the Light pipe on a 14mm pitch. The Light pipe material is water clear transmissive polycarbonate rated UL94-V0, and has a 35% oxygen index. DiaLight can provide custom Optopipe® solutions for your applications.

Features
• High transmissivity polycarbonate material
• UL94V-0 compliance
• ESD protection (circuit isolation from front panel)
• Wide viewing angle
• Arrays reduce insertion costs
• Secures to panel by press-fit (Also recommend supplement means of securing -- for example, clamping)

Part Name(s) : P8212
Hamamatsu
Hamamatsu Photonics
Description : Light Emitting/receiving module

Integrated Light Emitting/receiving elements for automobile VICS

P8212 is a Light Emitting/receiving module consisting of an LED array and a photoDiode in the same small package. The width of this module is minimized so that automobile antennas can be designed thin. A lens is also fitted onto the photoDiode to increase the amount of input Light. Although the lens makes the photoDiode directivity narrow, this problem was solved by separating the photoDiode optical axis from the LED axis to match the Light Emitting and receiving areas required for VICS.

Features
● Small package
● Lens design optimized for Light Emitting/receiving timings
● Cylindrical lens with less pickup error during component mounting

Applications
● Automobile VICS

Part Name(s) : KLB-0315W
Kodenshi
Kodenshi Auk Co., LTD
Description : Light Emitting Diode(White Color)

Light Emitting Diode(White Color)

KLB-0315 W is a White color LED, which has a White LED chip and

Features
• Color Temperature : 4,000 ~ 10,000K

Applications
• Amusement
• Indicator
• Display

Part Name(s) : 515-1070
Dialight
Dialight Corporation
Description : 3 x 5mm Rectangular micro® Optopipe® Optical Light Pipe, 2 Array (RJ45 Jack)

Recommended MicroLED SMT LEDs for use with 515-1070

DiaLight Optopipe® Light Pipe Description

This Light pipe’s two 3 x 5mm rectangular Light Emitting surfaces appear bright and are optically well isolated. The Light pipe is reliably held in place by 2 press-fit pins located at either end of the Light pipe array. This Optopipe® functions as a through-the-case indicator by conducting the Light over the top of connectors or switches. A textured finish on the 2 Light Emitting surfaces maximizes the viewing angle. The recommended Light sources are DiaLights 597 Series PLCC-2 or PLCC-4 Type SMT LEDs. The LEDs are mounted in a straight line on an 0.550" pitch. The Light pipe material is water clear transmissive polycarbonate rated UL94-V0, and has a 35% oxygen index.
DiaLight can provide custom Optopipe® solutions for your applications.

Features
• Complements DiaLight’s 515-1022 Four Array Optopipe Light Pipe
• Allows indicators to be positioned above corresponding RJ45 jack or D-Subminiature
• High transmissivity polycarbonate material
• UL94V-0 compliance
• ESD protection (circuit isolation from front panel)
• Wide viewing angle
• Arrays reduce insertion costs
• Secures to PCB by press-fit

 

12345678910 Next


All Rights Reserved © qdatasheet.com [ Privacy Policy ] [ Contact Us ]