1463173-2 View Datasheet(PDF) - Tyco Electronics
Part Name
Description
MFG CO.
'1463173-2' PDF : 28 Pages View PDF
Product Specification
108-78140
9.17 High-Pressure Cleaning Test
Water-Jet Pressure: 80Kgf/c㎡
Water Quantity: 600l/hr
Distance between Water-Nozzle and connector: 300mm
Water-Jet Direction: Fig. 10
Test Cycle: Keep connector at 100℃ atomosphere
↓
Water-jet cleaning 30 sec.
↓
Natural cooling 1 minute
↓
Repeat 10 cycles
Fig. 10
Sealing
ＢＡ
60°
60°
Fixed
10. TEST CONDITION
(1) Contact and housing to be tested are to be selected randomly.
(2) Contact and housing to be tested are to be crimped with wire of the
maximum size except when otherwise noted. Wire length shall be decided
each time.
(3) Wire used in the tests should have enough performance of Heatstability
and Solvent-resistance.
(4) Test is to be made in the normal temperature and humidity except when
otherwise noted.
(5) Test is to be made with the connector mated except when otherwise noted.
(6) Tolerance of the test conditions is ±10% except when otherwise noted.
(7) Quantity of test sample will be
adjusted depending on situation.
(8) Measurement for each test is to be made on 2 positions or more.
11. PACKAGING AND MARKING
Packaging units will each contain suitable quantities of the product. Arrangements
for transport and storage shall be such that no loss or damage is suffered. The
following labeling will be displayed.
・ Product description or Cat. No.
・ Quantity contained
・ Manufacturer’s name or abbreviated name
・ Date of manufacture or Lot. No.
Rev. A8
20 of 41
Share Link: 
