19-237B/R6GHBHC-C01/2T View Datasheet(PDF) - EVERLIGHT
Part Name
Description
MFG CO.
'19-237B/R6GHBHC-C01/2T' PDF : 12 Pages View PDF
19-237B/R6GHBHC-C01/2T
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within
once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do
soldering of each terminal. Be careful because the damage of the product is often started at the time of
the hand solder.
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a
double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether
the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http://www.everlight.com
Everlight Electronics Co., Ltd.
Device No. : DSE-0005369
http://www.everlight.com
Prepared date: 05-Jul-2011
Rev. 3
Page: 12 of 12
Prepared by : Ashley Kuo
Share Link: 
