24FC1025T View Datasheet(PDF) - Microchip Technology
Part Name
Description
MFG CO.
'24FC1025T' PDF : 28 Pages View PDF
24AA1025/24LC1025/24FC1025
1.0 ELECTRICAL CHARACTERISTICS
Absolute Maximum Ratings(†)
VCC.............................................................................................................................................................................6.5V
All inputs and outputs w.r.t. VSS .......................................................................................................... -0.6V to VCC+1.0V
Storage temperature ...............................................................................................................................-65°C to +150°C
Ambient temperature with power applied ................................................................................................-40°C to +125°C
ESD protection on all pins 4 kV
† NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the
device. This is a stress rating only and functional operation of the device at those or any other conditions above those
indicated in the operational listings of this specification is not implied. Exposure to maximum rating conditions for
extended periods may affect device reliability.
TABLE 1-1: DC CHARACTERISTICS
DC CHARACTERISTICS
Industrial (I): VCC = +1.7V to 5.5V TA = -40°C to +85°C
Automotive (E): VCC = +2.5V to 5.5V TA = -40°C to +125°C
Param.
No.
Sym.
—
D1
VIH
D2
VIL
Characteristic
A1, A2, SCL, SDA and
WP pins:
High-level input voltage
Low-level input voltage
Min.
—
0.7 VCC
—
D3
VHYS Hysteresis of Schmitt
Trigger inputs
(SDA, SCL pins)
0.05 VCC
D4
VOL
Low-level output voltage
—
D5
ILI
Input leakage current
—
D6
ILO
Output leakage current
—
D7
CIN,
Pin capacitance
—
COUT (all inputs/outputs)
D8
ICC Read Operating current
—
ICC Write
—
D9
ICCS
Standby current
—
Max.
—
—
0.3 VCC
0.2 VCC
—
0.40
±1
±1
10
450
5
5
Units
—
Conditions
V
V VCC 2.5V
V VCC < 2.5V
V VCC 2.5V (Note)
V IOL = 3.0 mA @ VCC = 4.5V
IOL = 2.1 mA @ VCC = 2.5V
A VIN = VSS or VCC
VIN = VSS or VCC
A VOUT = VSS or VCC
pF VCC = 5.0V (Note)
TA = 25°C, FCLK = 1 MHz
A VCC = 5.5V, SCL = 400 kHz
mA VCC = 5.5V
A SCL, SDA, VCC = 5.5V
A1, A2, WP = VSS
Note: This parameter is periodically sampled and not 100% tested.
DS20001941L-page 2
2005-2013 Microchip Technology Inc.
Share Link: 
