93LC46X-IP View Datasheet(PDF) - Microchip Technology
Part Name
Description
MFG CO.
'93LC46X-IP' PDF : 20 Pages View PDF
93LC46/56/66
1.0 ELECTRICAL CHARACTERISTICS
Absolute Maximum Ratings(†)
VCC.............................................................................................................................................................................6.5V
All inputs and outputs w.r.t. VSS ........................................................................................................ -0.6V to VCC + 1.0V
Storage temperature ...............................................................................................................................-65°C to +150°C
Ambient temperature with power applied ................................................................................................-40°C to +125°C
ESD protection on all pins ......................................................................................................................................................≥ 4 kV
† NOTICE: Stresses above those listed under “Maximum ratings” may cause permanent damage to the device. This
is a stress rating only and functional operation of the device at those or any other conditions above those indicated in
the operational listings of this specification is not implied. Exposure to maximum rating conditions for extended periods
may affect device reliability.
DC CHARACTERISTICS
DC CHARACTERISTICS
VCC = +2.5V to +5.5V
Industrial (I): TA = -40°C to +85°C
Param.
No.
Sym
Characteristic
Min
Typ
Max
D1
VIH1
High-level input voltage
2.0
—
VCC +1
VIH2
0.7 VCC
—
VCC +1
D2
VIL1
Low-level input voltage
-0.3
—
0.8
VIL2
-0.3
—
0.2 VCC
D3
VOL1
Low-level output voltage
—
—
0.4
VOL2
—
—
0.3
D4
VOH1 High-level output voltage 2.4
—
—
VOH2
VCC -0.2 —
—
D5
ILI
Input leakage current
—
—
±10
D6
ILO
Output leakage current
—
—
±10
D7
CIN,
Pin capacitance
COUT (all inputs/outputs)
—
—
7
D8
ICC write Operating current
—
—
3
D9
ICC read
D10 ICCS
Standby current
—
—
1
—
—
500
—
100
—
—
—
100
—
—
30
—
3
—
Note 1: This parameter is tested at TA = 25°C and FCLK = 1 MHz.
2: This parameter is periodically sampled and not 100% tested.
Units
Conditions
V VCC ≥ 2.7V
V VCC ≥ 2.7V
V VCC ≥ 2.7V
V VCC ≥ 2.7V
V IOL = 2.1 mA, VCC = 4.5V
V IOL = 100 µA, VCC = 2.5V
V IOL = 400 µA, VCC = 4.5V
V IOL = 100 µA, VCC = 2.5V
µA VIN = 0.1V to VCC
µA VOUT = 0.1V to VCC
pF VIN/VOUT = 0V (Note 1 & 2)
TA = 25°C, FCLK = 1 MHz
mA FCLK = 2 MHz, VCC = 5.5V
(Note 2)
mA FCLK = 2 MHz, VCC = 5.5V
µA FCLK = 1 MHz, VCC = 3.0V
µA FCLK = 1 MHz, VCC = 2.5V
µA CLK = CS = 0V; VCC = 5.5V
µA CLK = CS = 0V; VCC = 3.0V
µA CLK = CS = 0V; VCC = 2.5V
ORG, DI = VSS or VCC
DS21712B-page 2
2004 Microchip Technology Inc.
Share Link: 
