ACS710 View Datasheet(PDF) - Allegro MicroSystems
Part Name
Description
MFG CO.
ACS710
Allegro MicroSystems
'ACS710' PDF : 24 Pages View PDF
ACS710
120 kHz Bandwidth, High-Voltage Isolation
Current Sensor with Integrated Overcurrent Detection
Revision History
Revision
9
10
11
Revision Date
June 17, 2013
August 19, 2015
June 5, 2017
12
August 31, 2017
13
November 13, 2017
Description of Revision
Add 10BB variant
Added certificate number under UL stamp on page 1; updated Isolation Characteristics table.
Updated product status
Added Dielectric Surge Strength Test Voltage to Isolation Characteristics table (p. 3), and Noise and
Noise Density characteristics to Common Operating Characteristics table (p. 6).
Corrected typo in Dielectric Surge Strength Test Voltage notes of Isolation Characteristics table (p. 3)
Copyright ©2007-2017, Allegro MicroSystems, LLC
The products described herein are protected by U.S. patents: 7,166,807; 7,425,821; 7,573,393; and 7,598,601.
Allegro MicroSystems, LLC reserves the right to make, from time to time, such departures from the detail specifications as may be required to
permit improvements in the performance, reliability, or manufacturability of its products. Before placing an order, the user is cautioned to verify that
the information being relied upon is current.
Allegro’s products are not to be used in life support devices or systems, if a failure of an Allegro product can reasonably be expected to cause the
failure of that life support device or system, or to affect the safety or effectiveness of that device or system.
The information included herein is believed to be accurate and reliable. However, Allegro MicroSystems, LLC assumes no responsibility for its
use; nor for any infringement of patents or other rights of third parties which may result from its use.
For the latest version of this document, visit our website:
www.allegromicro.com
Allegro MicroSystems, LLC
23
115 Northeast Cutoff
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com
Share Link: 