ACS8527T View Datasheet(PDF) - Semtech Corporation

Part Name

Description

MFG CO.

ACS8527T

Line Card Protection Switch for PDH, SONET or SDH Systems

Semtech Corporation 

Prev 21 22

ACS8527 MUXPLL

ADVANCED COMMUNICATIONS

FINAL

DATASHEET

Revision Status/History

design. The datasheet is only raised to FINAL status after

the device has been fully characterized, and the

The Revision Status of the datasheet, as shown in the

center of the datasheet header bar, may be DRAFT,

PRELIMINARY, or FINAL, and refers to the status of the

datasheet content updated with measured, rather than

simulated parameter values.

Device (not the datasheet) within the design cycle. DRAFT

status is used when the design is being realized but is not

yet physically available, and the datasheet content

reflects the intention of the design. The datasheet is

raised to PRELIMINARY status when initial prototype

devices are physically available, and the datasheet

This is a FINAL release (Revision 4.01) of the ACS8527

datasheet. Changes made for this document revision are

given in Table 16, together with a summary of previous

revisions. For specific changes between earlier revisions,

refer (where available) to those earlier revisions. Always

content more accurately represents the realization of the use the current version of the datasheet.

Table 16 Revision History

Revision

2.00/ December 2002

3.00/April 2003

4.00/September 2003

4.01/June 2006

Reference

Description of changes

All pages

First full release.

All pages

Major revision. First Release at FINAL status.

All pages

Major revision. All pages reformatted. General update of

cross-references.

Table 3, Table 5, Table 6, Table 11,

Table 12 and Figure 5.

Tables and Figures updated.

“Fast Activity Monitor” on page 8,

“Status Reporting” on page 9,

“Revision Status/History” on page 21.

Sections updated.

“ESD Protection” on page 10,

“Latchup Protection” on page 10.

New Sections inserted.

Front and back pages and “Abbreviations” Interim update to reflect availability of lead(Pb)-free packaged part

on page 19.

and change to Semtech US address.

“Trademark Acknowledgements” on

Minor non-technical changes.

page 20 and “Revision Status/History” on

page 21.

Back page

Taiwan address changed

“Over-voltage Protection” on page 10

Hyperlink to Semtech website added.

Figure 6, Figure 7.

Updated Package diagram and footprint diagram. Former Tables 16

and 17 removed.

Revision 4.01/June 2006 © Semtech Corp.

Page 21

www.semtech.com

Share Link: