AD9071 View Datasheet(PDF) - Analog Devices
Part Name
Description
MFG CO.
'AD9071' PDF : 12 Pages View PDF
AD9071
Parameter
Temp
Test
Level
AD9071BR
Min
Typ
Max
Unit
DYNAMIC PERFORMANCE6
Transient Response
25°C
V
4
ns
Overvoltage Recovery Time
25°C
V
5
ns
Signal-to-Noise Ratio (SNR)
(Without Harmonics)
fIN = 10.3 MHz
25°C
I
54
56
dB
Full
V
55
dB
fIN = 41 MHz
25°C
I
53
55
dB
Full
V
54
dB
Signal-to-Noise Ratio (SINAD)
(With Harmonics)
fIN = 10.3 MHz
25°C
I
54
56
dB
Full
V
55
dB
fIN = 41 MHz
25°C
I
52
54
dB
Full
V
53
dB
Effective Number of Bits
fIN = 10.3 MHz
25°C
I
8.8
9.2
Bits
fIN = 41 MHz
25°C
I
8.5
8.8
Bits
2nd Harmonic Distortion
fIN = 10.3 MHz
25°C
I
63
75
dBc
fIN = 41 MHz
25°C
I
60
66
dBc
3rd Harmonic Distortion
fIN = 10.3 MHz
25°C
I
65
75
dBc
fIN = 41 MHz
25°C
I
57
65
dBc
Two-Tone Intermodulation (IMD)
fIN = 10.3 MHz
fIN = 41 MHz
25°C
V
70
dBc
25°C
V
60
dBc
NOTES
1Differential and integral nonlinearity based on FS = 80 MSPS.
2Gain error and gain temperature coefficient are based on the ADC only (with a fixed 2.5 V external reference).
3tV and tPD are measured from the threshold crossing of the ENCODE input to the 50% levels of the digital outputs. The output ac load during test is 5 pF.
4Power dissipation is measured under the following conditions: FS @ 100 MSPS, analog input is –1 dBFS at 10.3 MHz.
5A change in input offset voltage with respect to a change in VCC.
6SNR/harmonics based on an analog input voltage of –1.0 dBFS referenced to a 1.024 V full-scale input range.
Typical thermal impedance for the R style (SOIC) 28-lead package: θJC = 23°C/W, θCA = 48°C/W, θJA = 71°C/W.
Specifications subject to change without notice.
ABSOLUTE MAXIMUM RATINGS*
VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 V
Analog Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . VCC to 0.0 V
Digital Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . VCC to 0.0 V
VREF IN, VREF OUT . . . . . . . . . . . . . . . . . . . . VCC to 0.0 V
Digital Output Current . . . . . . . . . . . . . . . . . . . . . . . . 10 mA
Operating Temperature . . . . . . . . . . . . . . . . . –40°C to +85°C
Storage Temperature . . . . . . . . . . . . . . . . . . –65°C to +150°C
Maximum Junction Temperature . . . . . . . . . . . . . . . . . 150°C
Maximum Case Temperature . . . . . . . . . . . . . . . . . . . . 150°C
*Stresses above those listed under Absolute Maximum Ratings may cause perma-
nent damage to the device. This is a stress rating only; functional operation of the
device at these or any other conditions above those indicated in the operational
sections of this specification is not implied. Exposure to absolute maximum ratings
for extended periods may effect device reliability.
EXPLANATION OF TEST LEVELS
Test Level
I. 100% production tested.
II. 100% production tested at 25°C and sample tested at
specified temperatures.
III. Sample tested only.
IV. Parameter is guaranteed by design and characterization
testing.
V. Parameter is a typical value only.
VI. 100% production tested at 25°C; guaranteed by design
and characterization testing for industrial temperature range.
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection.
Although the AD9071 features proprietary ESD protection circuitry, permanent damage may
occur on devices subjected to high-energy electrostatic discharges. Therefore, proper ESD
precautions are recommended to avoid performance degradation or loss of functionality.
WARNING!
ESD SENSITIVE DEVICE
REV. C
–3–
Share Link: 
