Qdatasheet_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

ADAU1401AWBSTZ View Datasheet(PDF) - Analog Devices

Part Name
Description
MFG CO.
'ADAU1401AWBSTZ' PDF : 52 Pages View PDF
ADAU1401A
Pin No.
38, 39
40
Mnemonic
PLL_MODE0,
PLL_MODE1
CM
41
FILTD
43
VOUT3
44
VOUT2
45
VOUT1
46
VOUT0
47
FILTA
Type1
D_IN
A_OUT
A_OUT
A_OUT
A_OUT
A_OUT
A_OUT
A_OUT
Description
PLL Mode Setting. These pins set the output frequency of the master clock PLL. See the
Setting Master Clock/PLL Mode section for more details.
1.5 V Common-Mode Reference. A 47 μF decoupling capacitor should be connected
between this pin and ground to reduce crosstalk between the ADCs and DACs. The material of
the capacitors is not critical. This pin can be used to bias external analog circuits, as long as
those circuits are not drawing current from the pin (such as when the CM pin is connected
to the noninverting input of an op amp).
DAC Filter Decoupling Pin. A 10 μF capacitor should be connected between this pin and
ground. The capacitor material is not critical. The voltage on this pin is 1.5 V.
VOUT3 DAC Output. The full-scale output voltage is 0.9 V rms. This output can be used with
an active or passive output reconstruction filter. See the Audio DACS section for details.
VOUT2 DAC Output. The full-scale output voltage is 0.9 V rms. This output can be used with
an active or passive output reconstruction filter. See the Audio DACS section for details.
VOUT1 DAC Output. The full-scale output voltage is 0.9 V rms. This output can be used with
an active or passive output reconstruction filter. See the Audio DACS section for details.
VOUT0 DAC Output. The full-scale output voltage is 0.9 V rms. This output can be used with
an active or passive output reconstruction filter. See the Audio DACS section for details.
ADC Filter Decoupling Pin. A 10 μF capacitor should be connected between this pin and
ground. The capacitor material is not critical. The voltage on this pin is 1.5 V.
1 PWR = power/ground, A_IN = analog input, D_IN = digital input, A_OUT = analog output, D_IO = digital input/output, D_IO/A_IO = digital input/output or analog
input/output.
Rev. A | Page 13 of 52
Share Link: GO URL

All Rights Reserved © qdatasheet.com  [ Privacy Policy ] [ Contact Us ]