ADIS16136AMLZ View Datasheet(PDF) - Analog Devices
Part Name
Description
MFG CO.
'ADIS16136AMLZ' PDF : 20 Pages View PDF
Data Sheet
INSTALLATION TIPS
Figure 24 and Figure 25 provide the mechanical design infor-
mation used for the ADIS16136/PCBZ. Use these figures when
implementing a connector-down approach, where the mating
connector and the ADIS16136AMLZ are on the same surface.
When designing a connector-up system, use the mounting holes
shown in Figure 24 as a guide in designing the bulkhead mounting
system, and use Figure 25 as a guide in developing the mating
connector interface on a flexible circuit or other connector system.
The mating connector pattern in Figure 25 assumes the use of
the Samtec CLM-112-02 series of connectors.
15.600 BSC
31.200 BSC
ADIS16136
39.60 BSC
19.800 BSC
17.520
2x 0.560 BSC
ALIGNMENT HOLES
FOR MATING SOCKET
2.280
4x 2.500 BSC
5.00 BSC
5.00 BSC
Figure 24. Suggested Mounting Hole Locations, Connector Down
0.019685
[0.5000]
(TYP)
0.4334 [11.0]
0.0240 [0.610]
0.054 [1.37]
0.0394 [1.00]
0.1800
[4.57]
0.022± DIA (TYP)
NONPLATED
THRU HOLE 2×
0.022 DIA THRU HOLE (TYP)
NONPLATED THRU HOLE
0.0394 [1.00]
Figure 25. Suggested Layout and Mechanical Design for the Mating Connector
Rev. A | Page 19 of 20
Share Link: 
