AK4563AVF View Datasheet(PDF) - Asahi Kasei Microdevices
Part Name
Description
MFG CO.
'AK4563AVF' PDF : 39 Pages View PDF
ASAHI KASEI
[AK4563A]
Control Register R/W Timing
The data on the 4 wires serial interface consists of op-code (3bit), address (LSB-first, 5bit) and control data (LSB-first,
8bit). The transmitting data is output to each bit by “↓” of CCLK, the receiving data is latched by “↑” of CCLK. Writing
data becomes effective by “↑” of CSN. Reading data becomes Hi-z (Floating) by “↑” of CSN. CSN should be held to “H”
at no access. In case of connecting between CDTI and CDTO, the I/F can be also contolled by 3-wires.
CCLK always needs 16 edges of “↑” during CSN = “L”. Reading/Writing of the address except 00H ∼ 09H are inhibited.
Reading/Writing of the control registers by except op0 = op1 = “1” are invalid.
CSN
CCLK
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
CDTI
WRITE
CDTO
READ
CDTI
CDTO
op0 op1 op2 A0 A1 A2 A3 A4 D0 D1 D2 D3 D4 D5 D6 D7
“1” “1” “1”
Hi-Z
op0 op1 op2 A0 A1 A2 A3 A4
“1” “1” “0”
Hi-Z
D0 D1 D2 D3 D4 D5 D6 D7
Hi-Z
op0-op2: Op code (110:READ, 111:WRITE)
A0-A4: Register Address
D0-D7: Control data
Figure 13. Control Data Timing
MS0067-E-02
- 15 -
2004/12
Share Link: 
