AMS222
ABSOLUTE MAXIMUM RATINGS (Note 1)
Voltage Range on VCC
-0.5V to +16V
Operating Temperature Range
Storage Temperature Range
-40ºC to +125ºC
-55ºC to +125ºC
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only,
and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications
is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
DC ELECTRICAL CHARACTERISTICS
Electrical Characteristics at TA = -40ºC to +125ºC and VCC = +3.0C to 5.5V unless otherwise noted.
PARAMETER
Supply Current
High-Level Output Voltage
(OUT)
Low-Level Output Voltage
(OUT)
CONDITIONS
CL = 15pF, VCC = 3.3V, RSET = 12.5 KΩ
CL = 15pF, VCC = 5.5V, RSET = 12.5 KΩ
IOH = -1.5mA
VCC = 3.3V
IOH = -1.5mA
Min.
2.5V
AMS222
Typ.
1.0
1.0
Max.
1.2
1.5
0.4
Units
mA
V
V
AC ELECTRICAL CHARACTERISTICS
Electrical Characteristics at TA = -40ºC to +125ºC and VCC = +3.0C to 5.5V unless otherwise noted.
PARAMETER
CONDITIONS
Min.
AMS222
Typ.
Max.
Output Frequency Tolerance
Voltage Frequency Variation
VCC = 3.3V, TA = +25ºC
TA = +25ºC, RSET = 12.5 KΩ
VCC = 3.3V to 5.0 V (Note 2)
TA = +25ºc, RSET = 12.5 KΩ
VCC = 5.0V to 10V (Notes 2)
-1.0
-0.25
-0.5
Temperature Frequency Variation VCC = 3.3V (Note 3)
-2.0
Load Capacitance
(Note 4)
Output Duty Cycle
10kHz to 1MHz, TA = +25ºC (Note 3)
48
49.5
1MHz to 2 MHz (Note 4)
46
48
Output Rise/Fall Time
CL = 15pF, VCC = 3.3V
20
+1.0
+0.25
+0.5
+2.0
30
30
Note 1: All voltage referenced to ground.
Note 2: This is the change observed in output frequency due to changes in voltage.
Note 3: Parameter is guaranteed by design and is not production tested.
Note 4: Output voltage swings can be impaired at high frequencies combined with high output loading.
Units
%
%
%
pF
%
ns
Advanced Monolithic Systems, Inc. www.advanced-monolithic.com Phone (925) 443-0722 Fax (925) 443-0723