AS29F040CW-150/883C View Datasheet(PDF) - Micross Components
Part Name
Description
MFG CO.
'AS29F040CW-150/883C' PDF : 27 Pages View PDF
FLASH
AS29F040
ABSOLUTE MAXIMUM RATINGS*
Ambient Temperature with Power Applied...-55°C to +125°C
Voltage with Respect to Ground
VCC1...................................................-2.0V to +7.0V
A9, OE\2...........................................-2.0V to +12.5V
All other pins1....................................-2.0V to +7.0V
VCC Supply Voltage (±10%)............................-4.5V to +5.5V
Output Short Circuit Current3.......................................200mA
Storage Temperature......................................-65°C to +125°C
NOTES:
1. Minimum DC voltage on input or I/O pin is -0.5V. During voltage transitions, input
may overshoot VSS to -2.0V for periods of up to 20ns. See Figure 5. Maximum DC
voltage on input and I/O pins is VCC + 0.5V. During voltage transitions, input and I/O
pins may overshoot VCC + 2.0V for periods up to 20ns. See Figure 6.
2. Minimum DC voltage on A9 pin is -0.5V. During voltage transitions, A9 and OE\
pins may overshoot VSS to -2.0V for periods of up to 20ns. See Figure 5. Maximum
DC input voltage on A9 and OE\ is +12.5V which may overshoot to 13.5V for periods
up to 20ns.
3. No more than one output shorted to ground at a time. Duration of the short circuit
should not be greater than one second.
FIGURE 5: Maximum Negative
Overshoot Waveform
*Stresses greater than those listed under “Absolute Maximum Ratings”
may cause permanent damage to the device. This is a stress rating only and
functional operation of the device at these or any other conditions above
those indicated in the operation section of this specification is not implied.
Exposure to absolute maximum rating conditions for extended periods may
affect reliability.
FIGURE 6: Maximum Positive
Overshoot Waveform
AS29F040
Rev. 2.3 01/10
13
Micross Components reserves the right to change products or specifications without notice.
Share Link: 
