AT28C010-12DK View Datasheet(PDF) - Atmel Corporation
Part Name
Description
MFG CO.
'AT28C010-12DK' PDF : 19 Pages View PDF
Features
• Fast Read Access Time – 120 ns
• Automatic Page Write Operation
– Internal Address and Data Latches for 128 Bytes
– Internal Control Timer
• Fast Write Cycle Time
– Page Write Cycle Time – 10 ms Maximum
– 1 to 128-byte Page Write Operation
• Low Power Dissipation
– 80 mA Active Current
– 300 µA CMOS Standby Current
• Hardware and Software Data Protection
• DATA Polling for End of Write Detection
• High Reliability CMOS Technology
– Endurance: 104 or 105 Cycles
– Data Retention: 10 Years
• Operating Range: 4.5V to 5.5V, -55 to +125°C
• CMOS and TTL Compatible Inputs and Outputs
• Batch Tested for 10 Krad TID and 70 MeV Latch-up Capability
• JEDEC Approved byte-Wide Pinout
• 435 Mils Wide 32-Pin Flat Pack Package
AT28C010-12DK Mil
Space
1-megabit
(128K x 8)
Paged Parallel
EEPROMs
Description
The AT28C010-12DK is a high-performance Electrically Erasable and Programmable
Read-Only Memory. Its one megabit of memory is organized as 131,072 words by 8
bits. Manufactured with Atmel’s advanced nonvolatile CMOS technology, the device
offers access times to 120 ns with power dissipation of just 440 mW. When the device
is deselected, the CMOS standby current is less than 300 µA.
The AT28C010-12DK is accessed like a Static RAM for the read or write cycle without
the need for external components. The device contains a 128-byte page register to
allow writing of up to 128 bytes simultaneously. During a write cycle, the address and
1 to 128 bytes of data are internally latched, freeing the address and data bus for
other operations. Following the initiation of a write cycle, the device will automatically
write the latched data using an internal control timer. The end of a write cycle can be
detected by DATA POLLING of I/O7. Once the end of a write cycle has been detected
a new access for a read or write can begin.
Atmel's 28C010 has additional features to ensure high quality in manufacturing. The
device utilizes internal error correction for extended endurance and improved data
retention characteristics. An optional software data protection mechanism is available
to guard against inadvertent writes. The device also includes an extra 128 bytes of
EEPROM for device identification or tracking.
AT28C010-12DK
Preliminary
Rev. 4259A–AERO–06/03
1
Share Link: 
