AT34C02C
PERMANENT WRITE PROTECT REGISTER (PSWP) STATUS: To find out if the register has
been programmed, the same procedure is used as to program the register except that the
R/W bit is set to 1. If the device sends an acknowledge, then the permanent write protect
register has not been programmed. Otherwise, it has been programmed and the device is
permanently write protected at the first half of the array.
Table 8-1. PSWP Status
Pin
Command
A2 A1 A0
Read PSWP A2 A1 A0
Preamble
RW
B7 B6 B5 B4 B3 B2 B1 B0
0
1
1
0 A2 A1 A0 1
REVERSIBLE WRITE PROTECT REGISTER(RSWP) STATUS: To find out if the register has
been programmed, the same procedure is used as to program the register except that the
R/W bit is set to 1. If the sends an device acknowledge, then the reversible write protect
register has not been programmed. Otherwise, it has been programmed and the device is
write protected (reversible) at the first half of the array.
Figure 8-1. Device Address
Figure 8-2. Byte Write
Figure 1. Page Write
13
5185D–SEEPR–1/08