AT89STK-06 View Datasheet(PDF) - Atmel Corporation
Part Name
Description
MFG CO.
'AT89STK-06' PDF : 22 Pages View PDF
Hardware Description
2.5
Board Settings The AT89STK-06 board has two types of settings:
Jumpers
Solder strap
Test points
Table 2-1, Table 2-2 and Table 2-3 provide an overview of the available settings and
test points.
2.5.1 Jumpers
Table 2-1. Default Jumper Setting
Reference
PCB Name
Comments (guidelines)
Default
JP1
EA
ON : allows external execution
OFF: Internal code execution
Open (OFF)
ON : Enable C51 generic extension board (optionnal) buzzer
JP2
MUTE
OFF: Disable C51 generic extension board (optionnal) buzzer
Open (OFF)
ON : Enable CAN terminator resistor
JP3
CANRes
OFF: Disable CAN terminator resistor
Open (OFF)
JP4
RTS
ON : Enable RTS line to control ISP mode (for AutoISP mode)
OFF: Disable RTS line to control ISP mode
Open (OFF)
JP5
DTR
ON : Enable DTR line to drive MCU reset (for AutoISP mode)
OFF: Disable DTR line to drive MCU reset
Open (OFF)
JP6
Batt
ON : Enable Battery charge
OFF: Disable Battery charge
Open (OFF)
Figure 2-10. Jumper Setting Definition
strap
jumper header
ON or
Ex: 1-2
OFF
AT89STK-06 Demo Board Software Demo Guide
2-7
4339C–CAN–07/05
Share Link: 
