AT90S2313-4 View Datasheet(PDF) - Atmel Corporation
Part Name
Description
MFG CO.
'AT90S2313-4' PDF : 92 Pages View PDF
Crystal Oscillator
XTAL1 and XTAL2 are input and output, respectively, of an inverting amplifier that can
be configured for use as an On-chip Oscillator, as shown in Figure 2. Either a quartz
crystal or a ceramic resonator may be used. To drive the device from an external clock
source, XTAL2 should be left unconnected while XTAL1 is driven, as shown in Figure 3.
Figure 2. Oscillator Connections
MAX 1 HC BUFFER
HC
C2
XTAL2
C1
XTAL1
GND
Note: When using the MCU Oscillator as a clock for an external device, an HC buffer should be
connected as indicated in the figure.
Figure 3. External Clock Drive Configuration
4 AT90S2313
0839I–AVR–06/02
Share Link: 
