ATS660LSB View Datasheet(PDF) - Allegro MicroSystems
Part Name
Description
MFG CO.
'ATS660LSB' PDF : 16 Pages View PDF
ATS660LSB
TRUE ZERO-SPEED,
HALL-EFFECT ADAPTIVE
GEAR-TOOTH SENSOR
MECHANICAL INFORMATION
Component
Sensor Face
Plastic Housing
Leads
Lead Finish
Lead Pull
Material
Thermoset epoxy
Thermoplastic PBT
Copper
90/10 tin/lead solder plate
—
Function
Maximum temperature
264 psi deflection temp. (DTUL)
66 psi deflection temp. (DTUL)
Approximate melting temperature
—
—
—
Units
170°C*
204°C
216°C
225°C
—
†
8N
* Temperature excursions to 225°C for 2 minutes or less are permitted.
† All industry-accepted soldering techniques are permitted for these subassemblies provided the indicated maximum
temperature for each component (e.g., sensor face, plastic housing) is not exceeded. Reasonable dwell times, which do
not cause melting of the plastic housing, should be used.
Sensor location (in millimeters)
(sensor location relative to package center is the design objective)
2.2 mm
A
Dwg. MH-018-4 mm
Lead cross section (in millimeters)
0.48
0.36
0.41
NOM.
0.44
0.35
0.38
NOM.
0.0076
MIN. PLATING
THICKNESS
Dwg. MH-019A mm
Allegro
www.allegromicro.com
13
Share Link: 
