B1582T-3.0 View Datasheet(PDF) - Bay Linear
Part Name
Description
MFG CO.
'B1582T-3.0' PDF : 6 Pages View PDF
B1582
PIN DESCRIPTION
1. Sense = Allows Kelvin sense of VOUT at the load. (Positive side of the reference voltage of
the device).
2. ADJ = Negative side of the reference voltage for the device. Adding a small bypass
capacitor from the ADJ pin to ground will improve the transient response.
3. VOUT = Power output of the device.
4. VCTRL = Supply pin for the control circuitry of the device. The current flow into this pin will
be about 1% of the output current. VCTRL must be between 1.0V and 1.3V greater than the
output voltage for the device to regulate.
5. VIN = Output load current is supplied through this pin. VIN must be between 0.1V and 0.8V
greater than the output voltage for the device to regulate.
BLOCK DIAGRAM
Bay Linear, Inc 2418 Armstrong Street, Livermore, CA 94550 Tel: (925) 606-5950, Fax: (925) 940-9556
www.baylinear.com
Share Link: 
