C8051F367-GM2 View Datasheet(PDF) - Silicon Laboratories
Part Name
Description
MFG CO.
'C8051F367-GM2' PDF : 288 Pages View PDF
C8051F360/1/2/3/4/5/6/7/8/9
SFRPGCN Bit
Interrupt
Logic
CIP-51
SFRPAGE
SFRNEXT
SFRLAST
Figure 9.3. SFR Page Stack
Automatic hardware switching of the SFR Page on interrupts may be enabled or disabled as desired using
the SFR Automatic Page Control Enable Bit located in the SFR Page Control Register (SFR0CN). This
function defaults to ‘enabled’ upon reset. In this way, the autoswitching function will be enabled unless dis-
abled in software.
A summary of the SFR locations (address and SFR page) is provided in Table 9.2. in the form of an SFR
memory map. Each memory location in the map has an SFR page row, denoting the page in which that
SFR resides. Note that certain SFR’s are accessible from ALL SFR pages, and are denoted by the back-
ground shading in the table. For example, the Port I/O registers P0, P1, P2, and P3 all have a shaded
background, indicating these SFR’s are accessible from all SFR pages regardless of the SFRPAGE regis-
ter value.
Rev. 1.0
89
Share Link: 
